Service & Maintenance
Applications
- Trip Testing of High-voltage Circuit Breakers in Power Transformer Installations
- Measure the Insulation Resistance of Electric Vehicles
- Equipotential Bonding Test of Electric Vehicles (EV)
- Zero-voltage Measurement of Electric Vehicles
- Why Voltage Inspections of High Voltage Photovoltaic Power Generation Facilities Need CAT III Measuring Instruments
- Measuring the heat generated by electronic components
- Management of Measurement Data for UPS Sites to Facilitate the Digital Transformation
- Automatic partial discharge (RPDIV) using impulse voltages as defined in IEC 61934
- Deterioration Judgment of Stationary Lead-Acid Batteries
- TDD Measurement as Specified in the IEEE519 Standard
- On-site Inverter Measurement
- DC Large Current and Power Conversion Efficiency Measurement of Plating System Power Supplies
- Verify the Power Quality and Efficiency of an EV fast charger
- Verify Fault Ride-Through (FRT) Capabilities in Equipment and PV Systems
- Record Encoder Pulse Output to Verify Motor Operation
- Create Reports with Illuminance Measurements during Building Inspections
- Fast, Precise Reporting of Malfunctions and Potential Issues
- Easily Deliver Reports on Insulation Resistance Integrity for Annual Inspections
- Investigate the Cause of Tripped Circuit Breakers at Construction Sites
- Measure Transient Voltage Waveforms
- Measure Periodical Instantaneous Voltage Drops
- Inspect the Stress on Factory UPS Caused by Voltage Dips
- Manage soil moisture
- Verify correct operation of your radiant heating and cooling (HVAC) system
- Measure the Instantaneous Power Failure and Voltage Drop of Utility Power Supplies (50/60 Hz)
- Measure Irradiance and Temperature Wirelessly when Testing PV Installations
- Record the Water Level of a River
- Finding the Cause of Creaking Noise from Door Sashes
- Measuring the Surface Resistance of Industrial Materials
- Data Acquisition and Assessment in Railway Car Trial Runs (Train)
- Streamline Connections when Auditing the Energy Profile of Multiple Loads
- Log 4 to 20 mA Current for Instrumentation, Distributor, etc.
- Verify that Large Equipment Have the Same Electrical Potential
- How to Meet Public Lighting Requirements
- How to Evaluate Machine Oil Quality
- Improve Air-conditioner Operating Conditions
- Environmental Measurements in Conjunction with Gas Analyzers
- Operational Testing of Multiple-circuit Protective Relays
- Simple Method for Evaluating Strings of PV Cells
- Ambient room monitoring at data centers
- Test the Electrical and Mechanical Condition of Aircraft Frames
- Check the Deterioration of Oil Capacitors in Train Cars
- Measure Energy Savings Using a Small Clamp Logger
- On-site power efficiency measurement of an EV fast charger
- Power Failure Test of Uninterruptible Power Supply (UPS) Systems[871.68KB]
- Measure Voltage Drop Caused by Wiring Impedance
- Measure the High-Order Harmonic Voltage and Current of Power Lines
- Power Quality Survey of Solar Power Generation Systems
- Measure the Noise Generated by Switching Power Factor Correction Capacitors
- Measure the Transient Voltage in Glowing Fluorescent Lights
- Measure Lightning-induced Voltage Dips in a Low-Voltage Circuit
- Evaluation of Input and Output Characteristics of Inverters
- Evaluate Data Center Infrastructure Efficiency and Power Usage Effectiveness
- Test the Voltage after Replacing an LED Lighting Fixture
- Maintenance of Dynamic Uninterruptible Power Supplies[2805.64KB]
- Evaluation of Input and Output Characteristics of Power Conditioners
- Manage the Voltage of Lead-acid Storage Batteries
- Testing UPS Switching Time[2992.96KB]
- Measure Water Level Changes in a Well[1085.86KB]
- Measure the Earth Potential in order to Select the Appropriate Electric Anticorrosion Method[2204.23KB]
- Electrical Potential Measurement for Galvanic Protection(in Galvanic Anode Systems)
- Monitor for Differences in the Temperature/Humidity[1287.87KB]
- Verify the Energy Savings Created By Photovoltaic (PV) Systems
- Managing the Temperature/Humidity during the Curing of Concrete
- Evaluate the Input/Output Characteristics of a Power Conditioner for Mega Solar Power Generation
- Development and Evaluation of Electric Vehicle (EV) Quick Chargers
- Contact Measurement of Rotation Speed
- Save Energy by Eliminating Waste from Lighting
- Saving Energy by Reviewing Air Conditioning Settings
- Logging Measurements using a Wireless Local Area Network
- Reviewing PC Standby Power to Save Energy
- How to Measure the Performance of Insulation Paper
- How to Properly Test Light Switches
- Measure Fan Speed Rotation
- Test for Abnormal Waveforms when Switching to UPS Power
- Test the Deterioration of Stationary Lead-acid Batteries
- Measure the Insulation Resistance of Solar Cell Panels
- Train Track Corrosion Prevention Maintenance
- Measuring Air Conditioner Outlet Temperature[1287.23KB]
- How to Measure the Temperature of a Motor Shaft[479.58KB]
- Test the operational timing of circuit breakers in power industries
- Leak Current Measurement of Medical Equipment Compliant with the IEC60601-1 Ed.3.2:2020