Inrush current event setting on the Power Quality Analyzer PQ3198/PW3198

QI want to measure inrush current using the PQ3198/PW3198. In the EVENT2-CURRENT screen, there are "Inrush" and "I peak" selections. Which one is more appropriate to capture inrush current at 5A instantaneous peak?

A

Current range of the 9694 when used with power meters or power quality analyzers (3169, 3196, 3197, PQ3100, PW3198, PW3360, PW3365)

Qs it possible to set the 50A range on the PW3360 when using the Clamp On Sensor 9694 (5A AC)?

A

Polarity sign of power factor (power meters)

QWhat does it mean to have a negative power factor value?

A

Difference between the transient and other event waveforms (power quality analyzers)

QWhy are the waveforms recorded by the PQ3198/PW3198 different between transient and other events?

A

Negative sign on power factor value (power meters)

QWhy is power factor expressed with a negative sign? Is there any relationship between the polarity of power factor and active power?

A

Rated current of magnet adapters

QWhat is the rated current of the Magnet adapter 9804? I plan to use it for the power supply with the Voltage Line Power Adapter PW9003.

A

Converting the Event waveform data to CSV on the PQ ONE

QWhen I output the event waveform data measured by the PQ3100 ifrom the PQ ONE in CSV, the CSV file has only 1 digit after the second in the Time column of the CSV data. I would like to have the same resolution to the PQ ONE screen.

A

Displaying the phase voltage in 3P3W (delta) configuration on the PQ3198/PW3198

QIs it possible to display the phase voltage in 3P3W (delta) configuration on the PQ3198/PW3198?

A

Calculating the actual accuracy of an LCR meter

QHow do I calculate the actual accuracy of an LCR meter?

A

Scanner system for the BT3562

QPlease advise what should be noted when making a scanner system for the BT3562. The measured value sometimes shows "-----" when the BT3562 is used with my scanner.

A

Select your region & language

Americas

Europe

East Asia

Southeast Asia, Oceania

India

Worldwide

Inrush current event setting on the Power Quality Analyzer PQ3198/PW3198

QI want to measure inrush current using the PQ3198/PW3198. In the EVENT2-CURRENT screen, there are "Inrush" and "I peak" selections. Which one is more appropriate to capture inrush current at 5A instantaneous peak?

Current range of the 9694 when used with power meters or power quality analyzers (3169, 3196, 3197, PQ3100, PW3198, PW3360, PW3365)

Qs it possible to set the 50A range on the PW3360 when using the Clamp On Sensor 9694 (5A AC)?

Polarity sign of power factor (power meters)

QWhat does it mean to have a negative power factor value?

Difference between the transient and other event waveforms (power quality analyzers)

QWhy are the waveforms recorded by the PQ3198/PW3198 different between transient and other events?

Negative sign on power factor value (power meters)

QWhy is power factor expressed with a negative sign? Is there any relationship between the polarity of power factor and active power?

Rated current of magnet adapters

QWhat is the rated current of the Magnet adapter 9804? I plan to use it for the power supply with the Voltage Line Power Adapter PW9003.

Converting the Event waveform data to CSV on the PQ ONE

QWhen I output the event waveform data measured by the PQ3100 ifrom the PQ ONE in CSV, the CSV file has only 1 digit after the second in the Time column of the CSV data. I would like to have the same resolution to the PQ ONE screen.

Displaying the phase voltage in 3P3W (delta) configuration on the PQ3198/PW3198

QIs it possible to display the phase voltage in 3P3W (delta) configuration on the PQ3198/PW3198?

Calculating the actual accuracy of an LCR meter

QHow do I calculate the actual accuracy of an LCR meter?

Scanner system for the BT3562

QPlease advise what should be noted when making a scanner system for the BT3562. The measured value sometimes shows "-----" when the BT3562 is used with my scanner.