No LAN connection (Sequence Maker)

Q"Connected the Precision DC Voltmeter DM7275-01 to a LAN and entered commands in Sequence Maker. But a message shows up saying that it could not been connected. What should I do?"

A

Confirm the following:

1. Enter the [IP address] and [Port number] in the Excel as well, which is listed in the communication command manual of each product.

2. Set the interface of the instrument to LAN.

3. Check that the commands are correct.

 

Related Sites

Control and measure easily with Sequence Maker

Sequence Maker, a command send/receive add-in for Excel | Hioki

"Sequence Maker" an add-in for sending and receiving communication commands for measuring instruments | FAQ | Hioki