PW8001 Ld,Lq Analyzer
V1.00 Aug 30, 2024
The copyright to the executable program file and associated documents is owned by HIOKI E.E. CORPORATION.
This utility may not be bundled with software or other publications which are sold for profit without the express written permission of the copyright owner.
Further, this product may not be modified without the express written permission of the copyright owner.
HIOKI disclaims any and all responsibility for any consequences arising out of use of this software.
| Software (Setup_PW8001LdLqAnalyzer_1.00.exe) | |
|---|---|
| Manual (PW8001 Ld,Lq Analyzer Manual.pdf) |
This is dedicated application software for the HIOKI PW8001. By communicating with the power analyzer connected via LAN, you can measure and display Ld and Lq, plot graphs, and save data in CSV format.
Connect the PW8001 main unit to the computer to set up for measuring motor parameters.
Perform phase zero adjustment and measure the induced voltage constant, or input the induced voltage phase angle and induced voltage constant manually.
Start measuring Ld and Lq, and then measure and display motor parameters, plot graphs, and save data in CSV format.
Version Upgrade History
V1.00 July 2024
・First Release
Operating Environment
Supported OS: Windows 10 (64-bit only), Windows 11
CPU: 1.0 GHz or higher
Memory: 2.0 GB or more
Hard Disk: 128 MB or more of free space
Display: 1920×1080 or higher Communication
Interface: Ethernet (TCP/IP)
To install this software, LabVIEW Runtime 2019 or later and the NI VISA Driver need to be installed.