Search Results

• DC, max 100mA testing source
• 0.9 ms fastest measurement speed
• 100 mΩ to 1000 Ω range, 0.1 μΩ resolution

• High-speed testing ideal for automated lines
• Measure 0201-size components with low rated voltages without applying stress
• Contact improvement function ensures reliable contact

• 42 to 1000 A AC range
• Weighing only 100g with thin 16 mm body
• DMM function

• World's most popular ultra-slim clamp meter
• New with wider temperature range

• 10 ch isolated, 10 ms recording
• Measure the heat flow and volume of heat energy

• Measure heat flow, DC voltage/ temperature with thermocouple
• Evaluate material insulation performance
• Analyze the causes of temperature change
• Applications in automotive and construction industries

• 10 Hz to 50 kHz, ±1.5% accuracy
• 600A or 6000A AC rated

• Flexible Rogowski sensor easy routes through confined locations and around thick cables
• Tapered tip designed to feed readily through tangled wires

• DC to 10 kHz, ±1.0% accuracy
• Rated 100 A AC/DC

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ via Display Unit

• DC to 10kHz, ±2.0% accuracy
• Rated 600 A AC/DC

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ

• DC to 10kHz, ±1.5% accuracy
• Rated 2000 A AC/DC

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ

• DC to 5 kHz, ±1.0% accuracy
• Rated 100A AC/DC

• Make measurements over extended periods of time without the need to perform
zero-adjustment
• Ideal for measuring in locations with temperature variations

• DC to 5 kHz, ±2.0% accuracy
• Rated 600A AC/DC

• Make measurements over extended periods of time without the need to perform
zero-adjustment
• Ideal for measuring in locations with temperature variations

• DC to 5 kHz, ±1.5% accuracy
• Rated 2000A AC/DC

• Make measurements over extended periods of time without the need to perform
zero-adjustment
• Ideal for measuring in locations with temperature variations

• Pair with CT7000 series
• DCA, ACA, (DC+AC)A, frequency
• WAVE, RMS, PEAK, Hz output

• Combine with CT7000 series AC/DC current sensors
or output to data acquisition equipment

・10 mHz - 100kHz FG
・Max. 15 V output
・2 channels

・Signal generator module for Memory HiCorders
・Output up to 2 channels of arbitrary waveform for simulation testing

・ 2 ch, High-voltage input
・ Max. 1000 VDC, 700 VAC rms
・ DC to 100 kHz bandwidth

・ High-voltage direct input module for memory recorders
・ Measure the primary and secondary sides of UPS and commercial power supply transformers

• Max. 32ch analog to 64ch logic
• 20M-Sampling/s
• 12-bit/16-bit A/D resolution

• Operation testing and evaluation of inverters and UPS during load fluctuation and switching
• Analyze the relationship between engine control and vibration during vibration testing
• Identify power fluctuations when power supply is cycled

• |Z|, L, C, R testing
• 1MHz to 300MHz
• 0.5ms test speed, ±0.72% accuracy
• Measure LCR and conduct frequency sweeps simultaneously

• For high volume production inspections and research and development
• Comparator and contact check

• |Z|, L, C, R testing
• 100kHz to 300MHz
• 0.5ms test speed, ±0.72% accuracy
• Measure LCR and conduct frequency sweeps simultaneously

• For high volume production of ferrite chip beads and chip inductors
• Comparator and contact check

• 100mV to 1000V DC, 7-1/2 digit resolution
• 20ppm (±0.0020% rdg) accuracy
• DCV and temperature testing

• Super high accuracy ideal for aging tests of lithium-ion batteries
• Contact check maximizes measurement reliability

• 100mV to 1000V DC, 7-1/2 digit resolution
• 9ppm (±0.0009% rdg) accuracy
• DCV and temperature testing

• Super high accuracy ideal for aging tests of lithium-ion batteries
• Contact check maximizes measurement reliability

• 1 or 2 channels for CT6700 and 3270 series
• ±12 V output

• Power supply for wideband current probes for output to Memory HiCorders or oscilloscopes

• Earth resistance measurements for multi-grounded systems
• Leak to load current
• CAT IV 600V, True RMS
• Automatic measurement report function with Android™ connectivity via Bluetooth

• Clamp ground wires with ease without digging or disconnecting cables