Search Results

• DC to 50 MHz (−3dB), ±3.0% accuracy
• Maximum 5 A rms
• ±7.5 A peak (non-continuous)

• High-sensitivity for observing minute currents down to 1 mA
• Ideal for developing switching power supplies, inverts and motor controllers
• High S/N ratio

・Electrode for plates

・Measure the resistivity of flat samples efficiently
・Option for the SM7000 Series Super Megohmmeters

• 2 channels
• AC current recording
• Min. 1 sec logging interval
• 60000 data × 2ch memory

• Log load and leak current with clamp sensor
• Transfer data to PC while logging

• 1 Hz to 100 kHz, ±0.3% accuracy
• Rated 20 A/200 A AC

• Measuring AC current with low frequencies such as inverter control devices
• Wide bandwidth ideal for harmonic analysis, FFT analysis and waveform monitoring

• 2ch logger, minimum 0.5 sec interval
• Log temperature and humidity
• Transfer data wirelessly to mobile device or PC

• - 40 °C to 80 °C/ 0% to 100 % RH (with optional sensor)
• Manage production plants and agricultural sites

• |Z|, L, C, R testing
• 1 mHz to 200 kHz
• 2 ms test speed, ±0.05% accuracy
• Transformer measurement mode

• Built-in low impedance high precision mode for testing low inductance or ESR of aluminum electrolysis capacitance
• Turn ratio, mutual inductance and inductance difference measurements of transformers and coils

• 4 isolated channels
• ON/OFF detection of AC/DC voltage
• Large terminal type

• Logic probe for Memory HiCorders
• Detect power line voltage interruptions
• High speed response

• |Z|, L, C, R testing
• DC, or 4 Hz to 8 MHz (up to 10MHz special order available)
• 0.5 ms test speed, ±0.05% accuracy
• Accuracy guaranteed range from 1 mΩ

• Industry-standard LCR meter meeting the widest range of applications

• 100/ 1000 A AC/DC range
• Weighing only 150g with thin 16 mm body
• DMM function

• True RMS version available
• Handy double jaw lever clamp meter for one-touch maintenance of electrical facilities

・Electrode for plate samples

・Measure the resistivity of plate samples efficiently
・Option for the SM7000 Series Super Megohmmeters

• DC, or 45 Hz to 5 kHz
• 1 ch input for DC, or 1P2W
• 300 V, 30 A max. input
• ±0.1% basic accuracy

• Measure inrush current and power consumption in DC as well as current and power integration applications
• Compatible with the SPECpower® benchmark for server power consumption

• 40Hz to 5kHz, ±0.3% accuracy
• Rated 500 A AC, 1 mV/A output rate

• High accuracy AC current sensor with voltage output
• For inverter devices or commercial power lines

• Primary 1000A, secondary 100A (1/10 ratio) output
• Superior phase angle characteristics for power

• AC current transformer to meet applications exceeding 1000A AC

• High ±0.01% precision & ultra high 6-1/2 digit resolution
• 500 samples/sec

• Maximum 54 ch digital multimeter data acquisition system using the MR8990 DVM Unit and MR8740/MR8741 Memory HiCorder

• Collect up to 60,000 data x 16 channels from LR5000 series loggers
• Transfer data from logger to PC
• Transfer setting/clock data from PC to logger
• Free bundled software

• Wirelessly Transfer Logging Data from a LR5000 Series Data Logger

• Max. 32ch Analog to 64ch Logic
• 20M-Sampling/s
• 12-bit/16-bit/24-bit A/D resolution

• Multi-channel performance ideal for trial runs after the scheduled maintenance of railway cars to verify for voltage command signals, motor current, car speed, and brake pressure
• Evaluate inverters and UPS
• Transformer interruption testing

• Generate high-quality board testing data without physical boards

• Optimize testing performance when paired with the FA1240-50 Flying Probe Tester

• |Z|, L, C, R testing
• 40 Hz to 200 kHz
• 2 ms test speed, ±0.05% accuracy
• Comparator and BIN functions

• Economical LCR Meter designed for production lines
• Continuous testing over mixed measurement conditions, including C-D(120 Hz) and ESR(100 kHz)
• Comparator and BIN functions

• Single range: 500 V/ 100 MΩ
• AC voltage testing

• Dedicated single-range meter with easy-to-read scale
• LED backlight and battery indicator improve work efficiency

• Wire map check detects split pairs
• Direction check
• NVP-Enhanced testing for cable length

• Handheld LAN cable tester to easily test wire map, measure cable length and identify twisted-pair cables
• Verify connections after installing connectors on cables