Search Results

• 2ch logger, minimum 0.1 sec interval
• Record pulse, rotation, and I/O signals
• Transfer data wirelessly to mobile device or PC

• Perform pulse integration of vehicle speed or flow rate for equipment such as air conditioners
• Applications in HVAC, automotive, co-generation, water, gas and petroleum industries

• Max. 54ch Analog to 112ch Logic
• 20M-Sampling/s
• 12-bit/16-bit A/D resolution

• Measure minute fluctuations in output from sensors in automobiles and other equipment
• Identify voltage fluctuations in devices such as batteries at high levels of precision and resolution
• Function generator, arbitrary waveform generator, and waveform measurement in a single device

• 600.0 mV to 1000 V DC/6.000 V to 1000 V AC
• 6 A to 10 A DC and AC
• Low-pass filter
• 10 A direct input

• 6000 count general-purpose high-function DMM
• For laboratory and research applications

• DC to 10MHz (−3dB), ±1.0% accuracy
• Maximum 150 A rms
• ±300 A peak (non-continuous)

• High S/N ratio
• Directly connect to high impedance BNC input of oscilloscope or recorder
• Ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers

• Constant DC V and DC A source
• ±25 V, ±25 mA
• Thermoelectric power generation, K, E, J, T, R,S, B, N thermocouple
• Measure DC V and DC A

• DC voltage and current signal generator and tester for routine maintenance of standard devices
• Perform maintenance or loop tests of instrumentation systems

• Non-metallic contact clip
• For conductors with φ 2.4 to 17 mm core diameter
• For use on 70 to 600 V lines (50/60 Hz)

• Safely and easily check phase direction with absolutely no metal contact with conductors

• For instrumentation
• ±30mA DC current
• 1 sec logging interval
• 60000 data × 1ch memory

• Single-channel data logger for ±30mA DC instrumentation signals
• Transfer data to PC while logging

• 6.8ms testing over 8ch simultaneously
• Max. 1×10^15 Ω resistance testing
• 1pA to 1mA current testing

• Test leak current on multi-layer ceramic capacitors (MLCC)

• DC to 50MHz (−3dB), ±1.0% accuracy
• Maximum 30 A rms
• ±50 A peak (non-continuous)

• Observe currents down to 10 mA
• High S/N ratio
• Ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers

• Direct-connection testing
• Test SMDs with electrodes on the bottom
• DC to 8MHz（Can be measured up to 10 MHz, when combined with the special order model IM3536-01）
• Measurable sample sizes: Metric (Inch): 0402 (01005), 0603 (0201), 1005 (0402)

• High-precision 4-wire testing of advanced electronic components

• 4 channels for contact voltage signals
• High-speed 100ns response

• Detect the presence of voltage or relay contact signals with Memory HiCorders at high speeds

• For up to 2 kV DC or 1 kV AC
• Frequency bandwidth up to 10MHz

• Measure high voltage with Hioki Memory HiCorders
• Analyze potential differences included in common mode voltages, such as IGBT
• Inspect commercial power line waveforms, such as on 400V power lines

• 40Hz to 5kHz, ±0.3% accuracy
• Rated 50 A AC, 10 mV/A output rate

• High accuracy AC current sensor with voltage output
• Measure inverter devices or commercial power lines
• Compact design fits in to narrow spaces

• 40Hz to 5kHz, ±0.3% accuracy
• Rated 100 A AC, 1 mV/A output rate

• High accuracy AC current sensor with voltage output
• Measure inverter devices or commercial power lines
• Compact design fits in to narrow spaces

• IEC 61672-1 Class 2 compliant
• 30dB to 137dB
• DC output and AC monitor output

• Noise management for both commercial and industrial applications
• Output to data acquisition equipment to analyze signal correlations

• Protective ground tester (low resistance)
• 0 to 1.8 Ω measurements
• Max. 31A testing current

• Designed for protection circuit testing of a wide range of electrical equipment, including industrial machinery and medical equipment

• Insulation resistance testing: up to 9999 MΩ
• Withstanding voltage testing: up to 5 kV AC/DC
• Full remote control

• All-in-one tester that combines withstand voltage and insulation resistance (AC/DC) measurement

• Waveform only for exclusive use with Memory HiCorders (P9000-01) or waveform/RMS value switchable (P9000-02)
• For use with input of up to 1 kV AC/DC
• Requires separate power supply

• Isolated testing of high voltage signals
• Observe both instantaneous or RMS waveforms

• 15ch to 105ch isolated input, 100ms recording
• Wireless logging system using Bluetooth® wireless technology

• DC V, temperature, Pt sensor, humidity, resistance
• Simulate electricity generation characteristics
• Minimize complicated wiring and costs with wireless system