AC CLAMP METER 3280-10F
Rugged & Compact, Essential Equipment for Professional Electricians: Measure Current and Voltage with a Single Instrument
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’ s expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots.
CAT IV 300 V (Current)
CAT III 600 V (Current)
CAT III 300 V (Voltage)
Using 3280 series AC clamp meters: Introduction to functionality and measurement methods
In addition to AC current measurement, these clamp meters provide voltage and resistance measurement as well as continuity check functionality.
Their compact size, low-profile design, and resistance to both rough handling and extreme temperatures make them essential tools for any electrician.
Key Features
- Measure the fundamental waveform component using the average rectified method
- Expanded -25°C to 65°C operating temperature range
- Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
- Drop proof design withstands drop from a height of 1 meter
Model No. (Order Code)
3280-10F | Average rectified |
---|---|
3280-70F | 3280-10F, CT6280 bundled model |
Using 3280 series AC clamp meters: Difference between mean value and true RMS measurement
Measurements taken with the Hioki 3280-10F (which uses the mean value method) and the the Hioki 3280-20F (which uses the true RMS method) are compared.
Observe the difference between readings from these two types of instruments when measuring a distorted waveform that contains harmonic components such as those produced by inverters and switching power supplies.
A pocket clamp meter that can use flexible sensors
When connected to an optional flexible current sensor, the 3280-10F can be used to measure the current flowing in pairs of wires or in tangled or complexly routed wires around which it was not possible to apply a clamp-on sensor in the past.
Essential for electrical work: A thin card tester that fits in the pocket with all the capabilities of a clamp meter
The 3280-10F delivers all the functionality of a clamp meter and card tester in the form factor of the latter. In addition to current measurement, this single instrument delivers voltage measurement, continuity check, and resistance measurement functionality.
A tough, pocket-size clamp meter with an operating temperature range of -25°C to 65°C
The 3280-10F inherits the drop-proof durability of the previous 3280-10 (making it able to withstand being dropped onto concrete from a height of 1 m) and expands that instrument’s operating temperature range to -25°C to 65°C (from the previous 0°C to 40°C). As a result, it can be used in even harsher environments.
Basic specifications
AC Current range | 41.99 to 1000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt. |
|||||
---|---|---|---|---|---|---|
DC Voltage range | 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. | |||||
AC Voltage range | 4.199 V to 600 V, 4 ranges (45 to 500 Hz, Average rectified), Basic accuracy: ±1.8 % rdg. ±7 dgt. |
|||||
Crest factor | N/A | |||||
Resistance range | 419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt. | |||||
Other functions | Continuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter | |||||
Display | LCD, max. 4199 dgt., Display refresh rate: 400 ms | |||||
Environmental protection | IP40 dustproof and waterproof (while in storage) | |||||
Power supply | Coin type lithium battery (CR2032) ×1, Continuous use 120 hours | |||||
Core jaw dia. | φ 33 mm (1.30 in) | |||||
Dimensions and mass | 57 mm (2.24 in) W × 175 mm (6.89 in) H × 16 mm (0.63 in) D, 100 g (3.5 oz) | |||||
Included accessories | CARRYING CASE 9398 ×1, TEST LEAD L9208 ×1, Coin type lithium battery (CR2032) ×1, Instruction manual ×1 |
CT6280 Basic specifications
Core jaw dia. | φ 130 mm (5.12 in) (Cable cross-section diameter: 5 mm (0.20 in); tip cap diameter: 7 mm (0.28 in)) | |||||
---|---|---|---|---|---|---|
AC Current | 419.9 A/ 4199 A, 2 ranges (±3.0 % rdg. ±5 dgt.) | |||||
Cable length | 800 mm (31.5 in) |
Included accessories (2)
70 cm (2.30 ft) length
Options (5)
C0205 is an included accessory for the CT6280 and 3280-70F.
L4933, L4934: Attach L9208 with the cap removed.
Soft case
Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 60V DC/ 30V AC
Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V
Secures one end of each test lead to the rear of the meter