Is it possible to measure the leakage current of a 3-phase/3-wire or 3-phase/4-wire device?
QIs it possible to measure the leakage current of a 3-phase/3-wire or 3-phase/4-wire device?
A
Select your region & language
Americas
Europe
Southeast Asia, Oceania
India
I’m seeing voltage measured values that are lower than the nominal voltage.
QI’m seeing voltage measured values that are lower than the nominal voltage.
A
Is the following connection method correct: OUTPUT terminal + coaxial cable + 50 Ω terminating resistor + measuring instrument?
QIs the following connection method correct: OUTPUT terminal + coaxial cable + 50 Ω terminating resistor + measuring instrument?
A
Can I change the full-scale value by changing the CT ratio? Will the accuracy and resolution change as a result?
QCan I change the full-scale value by changing the CT ratio? Will the accuracy and resolution change as a result?
A
What is the smallest current value that can be measured with wideband current probes?
QWhat is the smallest current value that can be measured with Hioki wideband current probes?
A
Is it possible to measure power in multiple circuits using the same voltage circuit?
QIs it possible to measure power in multiple circuits using the same voltage circuit?
A
Measured values exhibit instability.
QMeasured values exhibit instability.
A
The probe responds briefly when moved towards and away from a non-energized circuit or a DC circuit.
QThe probe responds briefly when moved towards and away from a non-energized circuit or a DC circuit.
A
Can the MR8904 output data to the CAN bus?
QCan the MR8904 output data to the CAN bus?
A
Are the Rhc and Rhp output resistors shown in the reference circuit in Appendix 5.2 of the user manual built into the instrument?
QAre the Rhc and Rhp output resistors shown in the reference circuit in Appendix 5.2 of the user manual built into the instrument?
A