HUMIDITY LOGGER LR5001

Main unit only. Attached Connection Cable: Not covered by warranty

Hioki compact 1 or 2-channel data loggers feature a 60,000 data set/channel memory to measure temperature, humidity, voltage or instrumentation signals. The LR5001 logs temperature and humidity over 2 channels in as fast as 1 second intervals.

Key Features

Easily mount the light-weight, pocket-sized loggers in tight spaces
Easy-to-see dual display
Transfer data to PC even during recording(*1)
Replace batteries while recording (30 second limit) (*2)
7 times the memory capacity than predecessor (Record 60,000 data per channel)
Record without missing fluctuations in STAT mode
Measurement data is preserved even after the battery dies
Worry-free backup preserves recorded data even if a new measurement is started by mistake

*1:Optional accessory is required and sold separately.
*2:Recording is interrupted during battery replacement if the battery is very weak. After batteries are replaced, recording resumes automatically. Previously recorded data is not lost during battery replacement.

Note: Communication Adapter LR5091 or Data Collector LR5092-20 is necessary to transfer data from a LR5000 series Logger to a PC.

Basic specifications

Accuracy guaranteed: 1 year

Measurement items	Temperature 1 ch and Humidity 1 ch (Requires included or optional humidity sensor)
Measurement range	Temperature: -40.0°C to 85.0°C, Humidity: 0 to 100% RH at sensor environment
Basic accuracy	[Temperature] : ±0.5 °C (main unit + sensor accuracy, at 0.0 to 35.0 °C) [Humidity] : ±5 % rh (main unit + temperature / humidity sensor LR950x combination, at 20 to 30 °C / 10 to 50 % rh) Note: Basic accuracy is typical value, refer to the detailed catalog
Storage capacity	Instantaneous value mode: 60,000 data/ch, Statistical value mode: 15,000 data/ch
Recording interval	1 to 30 sec., 1 to 60 min., 15 selections
Recording modes	Instantaneous recording: at every recording interval Statistical value recording: Measure at one second intervals, and record the instantaneous, maximum, minimum, and average values within every recording interval
Recording methods	One-time recording: Stop recording when the memory capacity is full Endless recording: Continue recording even when the memory capacity is full (old data is overwritten) Start: Logger button operation or scheduled time Stop: Logger button operation or scheduled time, or auto-stop when the memory capacity is full (at one-time recording)
Other functions	Always backs up last recorded data; backs up recorded data and setting conditions when battery power is low Note: After batteries are replaced within 30 seconds, recording resumes automatically (Recording is interrupted during battery replacement)
Waterproof and dust-proof	IP54 (EN60529) (with sensor connected, but not including sensor tip)
Interfaces	Infrared optical communications with LR5091, LR5092-20
Power supply	LR6 (AA) Alkaline battery × 1, Battery life: Approx. 3 months (Instantaneous recording, with 1-minute interval and auto power saving, at 20 °C), Approx. 20 days (Instantaneous recording, with 1-second interval at 20 °C)
Dimensions and mass	79 mm (3.11 in) W × 57 mm (2.246 in) H × 28 mm (1.10 in) D, 105 g (3.7 oz)
Included accessories	LR6 (AA) Alkaline battery (built-in internal) × 1, Humidity Sensor LR9504 × 1, Instruction manual × 1, Operation guide × 1, Kickstand × 1

Options (2)

For data acquisition to PC

COMMUNICATION ADAPTER LR5091

Learn more

• Transfer data from logger to PC
• Transfer setting/clock data from PC to logger
• Free bundled software

DATA COLLECTOR LR5092

Learn more

• Collect up to 60,000 data x 16 channels from LR5000 series loggers
• Transfer data from logger to PC
• Transfer setting/clock data from PC to logger
• Free bundled software

For fixing (2)

WALL-MOUNTED HOLDER LR9901

Not compatible with Model LR5051

MAGNETIC STRAP Z5004

Optional sensors (4)

LR9504 is bundled accessory

HUMIDITY SENSOR LR9502

5 m (16.41 ft)
Temperature range: -40 to 85 ˚C
Humidity range: 0 to 100 % rh
Response time: 300 seconds
(90 % response time)
Waterproof: None
Sensor size: 13×30 mm
(0.51×1.18 in)

HUMIDITY SENSOR LR9503

10 m (32.81 ft)
Temperature range: -40 to 85 ˚C
Humidity range: 0 to 100 % rh
Response time: 300 seconds
(90 % response time)
Waterproof: None
Sensor size: 13×30 mm
(0.51×1.18 in)

HUMIDITY SENSOR LR9504

40 mm (1.57 in)
Temperature range: -40 to 85 ˚C
Humidity range: 0 to 100 % rh
Response time: 300 seconds
(90 % response time)
Waterproof: None
Sensor size: 13×30 mm
(0.51×1.18 in)

HUMIDITY SENSOR LR9501

1 m (3.28 ft) length
Temperature range: -40 to 85 ˚C
Humidity range: 0 to 100 % rh
Response time: 300 seconds
(90 % response time)
Waterproof: None
Sensor size: 13×30 mm
(0.51×1.18 in)