WAVEFORM GENERATOR UNIT MR8790
Waveform Generator Input Module for Control Simulation Testing
The Waveform Generator Unit MR8790 is a plug-and-play module for Hioki Memory HiCorders that offers high-precision DC voltage output for generating signals that simulate voltage fluctuations at very low levels.
Key Features
- Output sine waves (20 kHz max.) and DC voltage signals up to 4 channels per unit
- Output signals up ±10V or 5mA
- For limited models only (Cannot be used for 8847, MR8847-01, MR8847-02, MR8847-03)
- Isolated between unit and output, and between all channels
Model No. (Order Code)
MR8790 |
---|
List of Available Memory HiCorders
Please refer to the table here for the types of input units that can be used for each Memory HiCorder.
Basic specifications
Output terminal | Number of channels: 4, SMB terminal (Output impedance: 1 Ω or less) Max. rated voltage to ground: 30 V rms AC or 60 V DC |
|||||
---|---|---|---|---|---|---|
Output voltage range | -10 V to 10 V (Amplitude setting range: 0 V to 20 V p-p, Setting resolution: 1 mV) | |||||
Max. output current | 5 mA | |||||
Output function | DC, Sine wave (Output frequency range: 1 Hz to 20 kHz) | |||||
Accuracy | Amplitude accuracy: ±0.25% of setting ±2 mV p-p (1 Hz to 10 kHz) Offset accuracy: ±3 mV DC output accuracy: ±0.6 mV |
|||||
Other | Self-test function (Voltage, Current) | |||||
Dimensions and mass | 106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 230 g (8.1 oz) | |||||
Included accessories | None |
Output cable (2)

Max. rated voltage to earth: 33 Vrms AC or 70 V DC, SMB to alligator clip, 1.5 m (4.92 ft) length

Max. rated voltage to earth: 33 Vrms AC or 70 V DC, SMB to BNC terminal, 1.5 m (4.92 ft) length
Use with these Products (3)
*Cannot use with 8847 or MR8847
* Main products are listed below. For more information, please see each product page.