VIR GENERATOR UNIT U8794

Key Features

As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance
DC voltage, DC current, and resistance simulation output
In resistance generation, the voltage to be connected is measured, the output current is calculated from the set resistance value, and simulated output
Used in combination with Memory HiCorder series MR8740T (not available in other models)
Isolation between each output channel and between channel and chassis

U8794	For the MR8740-50

Note: This module must be used with the Memory HiCorder. Output cords are not included. Please purchase them separately.

Please refer to the table here for the types of input units that can be used for each Memory HiCorder.

Accuracy guaranteed: 1 year

Output terminal	Number of channels: 8 (each channel is isolated), Connector: 25-pin D-sub Max. rated voltage to earth: 25 V
Output items	DC voltage, DC current, resistance (simulated output)
Output range	DC voltage: -0.100 0 V to +5.300 0 V (setting resolution: 0.1 mV) DC current: 5 mA range: -5.000 0 mA to +5.000 0 mA, Setting resolution: 0.1 μA 1 mA range: -1.000 00 mA to +1.000 00 mA, Setting resolution: 0.01 μA 250 μA range: -250. 00 μA to +250.00 μA, Setting resolution: 0.01 μA 50 μA range: -50. 000 μA to +50. 000 μA, Setting resolution: 0.001 μA Resistance: 10 Ω to 1 MΩ, Setting resolution: 6 digits
Output accuracy	DC voltage: 5 V range, ±0.035% of setting ± 800 μV DC current: 5 mA range: ±0.050% of setting ± 4.0 μA 1 mA range: ±0.050% of setting ± 800 nA 250 μA range: ±0.050% of setting ± 200 nA 50 μA range: ±0.050% of setting ± 40 nA
Other	Self diagnostic, switch output terminals, estimate target connection, cancel offset
Dimensions and mass	106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 280 g (9.9 oz)
Included accessories	None