| Sep. 16, 2026 |
|
Potential measurement abnormalities under specific settings.
|
Firmware V1.05 or earlier
|
| Aug. 03, 2026 |
|
The fluctuation of measurement values becomes bigger, and it may become out of the accuracy or misjudge the phase detection.
|
Hardware
|
| Mar. 02, 2026 |
|
It may be out of the accuracy specifications.
|
Hardware
|
| Feb. 16, 2026 |
|
The power phase angle measurement error is occasionally increased when turning on the power, and it may become out of the accuracy specifications at about 20kHz or higher.
|
Hardware
|
| Dec. 16, 2025 |
-
POWER ANALYZER PW8001-01, PW8001-02, PW8001-03, PW8001-04, PW8001-05, PW8001-06, PW8001-11, PW8001-12, PW8001-13, PW8001-14, PW8001-15, PW8001-16
|
Regarding measurement error when used under specific conditions.
|
Firmware V2.01–V2.55
|
| Sep. 09, 2025 |
|
When measuring the high resistance, the measurement value may fluctuates a lot by open/close action of clamp sensor and may become the out of the accuracy specifications.
|
Hardware
|
| Sep. 21, 2022 |
|
Changes of Calibration Points
|
|
| Jun. 10, 2022 |
|
Out of accuracy for the first measurement after changing the range in auto range
|
Applicable firmware versions: Please refer to the link.
|
| May. 29, 2020 |
|
Important Safety Notice and Recall: Connection Cord L9197
|
Hardware
|
| Jan. 10, 2020 |
|
The measurement results may be out of accuracy
|
Firmware V2.03
|
| Sep. 19, 2019 |
|
Memory HiCorder does not start at power ON
|
Firmware V2.00 or earlier
|
| Aug. 01, 2018 |
|
|
|
| Apr. 02, 2018 |
|
|
|
| Aug. 24, 2017 |
|
Measurement Error Defect
|
Firmware V1.00–V1.09
|
| Jun. 15, 2015 |
|
ST5540 may generate false pass judgments.
|
Firmware V1.02–V1.05
|
| Dec. 19, 2014 |
|
Measured values can become unstable and indicate higher.
|
Hardware
|
| Jun. 30, 2014 |
|
|
|
| Dec. 19, 2013 |
|
Non-conformance with specified current measurement accuracy.
|
Hardware
|
| Jun. 03, 2013 |
|
Risk of Electric Shock on Models PW3360 series and PW9002
|
Hardware
|
| Oct. 30, 2012 |
|
If the support feet deteriorate due to exposure to oils or chemicals, the handle may come off.
|
Hardware
|
| Dec. 16, 2011 |
|
Erroneous values may appear among the measurement values on a regular basis.
|
Applicable firmware versions: Please refer to the link.
|
| Jul. 03, 2006 |
|
There is a risk of short circuits in the product’s input and power supply sections.
|
Hardware
|