CLAMP ON POWER HiTESTER 3169

Demand Measurement up to 4 Circuits and Simultaneous Harmonics Analysis

Discontinued

Not provided in PW3360 and PQ3100: 4-circuit measurement (single-phase 2-wire), high-speed data storage, and high-speed D/A output.

Overview
Features
Specifications
Options
Downloads
Applications

Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3169 is clamp on power meters designed to measure demand and harmonics, which are important for energy management, as well as basic electrical parameters such as voltage, current, power, power factor, and integrated power (watthours).

Key Features

Simultaneously measure demand and harmonic waveforms that share the same voltage line over 4-circuits
Data can be saved onto a PC card
High-speed and continuous processing to measure individual waveforms
High-speed D/A output for analog graph recording (Model 3169-21)

Model No. (Order Code)

3169-20	Discontinued, Main unit, clamp sensor is sold separately
3169-21	Discontinued, With D/A output function model

Note: Optional current sensor is necessary to measure current or power parameters. To store measurement data, use only the guaranteed PC cards sold by Hioki.

To measure multiple systems simultaneously

In addition to performing simultaneous measurement for up to four systems (single-phase, 2-wire) with a common voltage, you can set the current range individually for each system. Setting the most suitable current range for both large and small loads allows you to acquire more accurate measurements.

Basic specifications

Accuracy guaranteed: 1 year

Measurement line & number of circuits	Single-phase 2-wires (4 circuits), Single-phase 3-wires (2 circuits), Three-phases 3-wires (2 or 1 circuit), and Three-phases 4-wires (1 circuit) Note: 50 or 60 Hz, and that share the same voltage line
Measurement items	Voltage, Current, Active/ reactive/ apparent power, Active/ reactive power integration, Power factor, Frequency, Harmonic waveform value (up to 40th order)
Measurement range	[Voltage] 150.00 V to 600.00 V AC, 3 ranges, [Current] 500.00 mA to 5.0000 kA AC (depends on current sensor in use), [Power] 75.000 W to 900.00 kW (depends on combination of voltage, current range, and measurement line)
Basic accuracy	AC Voltage: ±0.2 % rdg. ±0.1 % f.s. AC Current: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy Active power: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy (at power factor = 1) Clamp on sensor 9661: ±0.3 % rdg. ±0.01 % f.s. (different from each sensor models)
Measurement method	Digital sampling, PLL synchronization or 50/60 Hz fixed clock
Display refresh rate	2 times /sec (except when a PC card accessing, or RS-232C communications)
Data save interval	Standard interval: 1 sec to 30 sec, 1 minute to 60 minutes, 13 selects Fast interval: A single waveform, or 0.1, 0.2, or 0.5 sec (at instant value only)
Frequency characteristics	Fundamental waveforms up to the 50th order ±3% f.s. + measurement accuracy (of a 45 to 66 Hz fundamental waveform)
Other functions	Error connect check, language selection, display hold, setting backup, power shut off management, key lock, [3169-21 only] D/A output 4 channels, (±5 V DC f.s.)
Power supply	100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions and mass	210 mm (8.27 in)W × 160 mm (6.30 in)H × 60 mm (2.36 in)D, 1.2 kg (42.3 oz)
Included accessories	Voltage cord L9438-53 ×1 (Black/ Red/ Yellow/ Blue, 3 m (9.84 ft) length, Alligator clip ×4), Power cord ×1, Instruction manual ×1, Quick start manual ×1, CD-R ×1 (RS-232C interface operating manual) ×1, Input cord label ×1, Connection cable 9441 ×1 (for the 3169-21 only)

Current measurement (8)

For power or load current measurement

(1 sensor necessary for single-phase measurements, and 2 or 3 sensors required for 3 phase measurements)

AC FLEXIBLE CURRENT SENSOR CT9667

Learn more

• 10 Hz to 20 kHz, ±2% accuracy
• Rated 5000 A/ 500 A AC

CONNECTION CABLE 9219

Connect with the 9695-02/ -03, Output BNC terminal, 3m (9.84ft) length

CLAMP ON SENSOR 9660

Learn more

• 40Hz to 5kHz, ±0.3% accuracy
• Rated 100 A AC, 1 mV/A output rate

CLAMP ON SENSOR 9661

Learn more

• 40Hz to 5kHz, ±0.3% accuracy
• Rated 500 A AC, 1 mV/A output rate

CLAMP ON SENSOR 9669

Learn more

• 40Hz to 5kHz, ±1.0% accuracy
• Rated 1000 A AC, 0.5 mV/A output rate

CLAMP ON SENSOR 9694

Learn more

• 40Hz to 5kHz, ±0.3% accuracy
• Rated 5 A AC, 10 mV/A output rate

CLAMP ON SENSOR 9695-02

Learn more

• 40Hz to 5kHz, ±0.3% accuracy
• Rated 50 A AC, 10 mV/A output rate

CLAMP ON SENSOR 9695-03

Learn more

• 40Hz to 5kHz, ±0.3% accuracy
• Rated 100 A AC, 1 mV/A output rate

Adapter (1)

For clamp sensor

CLAMP ON ADAPTER 9290-10

Learn more

• Primary 1000A, secondary 100A (1/10 ratio) output
• Superior phase angle characteristics for power

Voltage measurement (5)

*The L9438-53 is bundled

PATCH CORD L1021-01

Banana branch-banana, Red: 1, 0.5 m (1.64 ft) length, for branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V

PATCH CORD L1021-02

Banana branch-banana, Black: 1, 0.5 m (1.64 ft) length, for branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V

VOLTAGE CORD L9438-53

Black/ Red/ Yellow/ Blue, 3 m (9.84 ft) length, Alligator clip ×4

MAGNETIC ADAPTER 9804-01

Attaches to the tip of cord, red ×1, φ11 mm (0.43 in)

MAGNETIC ADAPTER 9804-02

Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)

PC software (1)

POWER LOGGER VIEWER SF1001

Learn more

• For PW3360, PW3365 and 3169 series
• Trend graph presentation
• Summary, daily, weekly, and monthly reports and printing

Storage media (1)

* PC CARD 2G 9830, PC CARD 1G 9729 : cannot use with the 3169-20, 3169-21 * Supplied with PC Card adapter

PC Card Precaution
Use only PC Cards sold by HIOKI. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards.