Upgrading the BT6065/BT6075 version
V1.06 Sep 09, 2026
- If you are unable to download software, please check the following:
- Please register a my HIOKI account and then use it to log in to the my HIOKI service.
| Software (BT6065V106.zip) | |
|---|---|
| Version update tool (BT6065_UpdateTool_V100.zip) | |
| Manual (BT6065BT6075 Version Upgrade Instructions_English.pdf) |
○ Latest software is posted. Keep the instruction manual up-to-date.
○ Do not perform the following operations during the upgrade. The upgrade will fail.
・ Turn off the main unit.
・ Unplug the communication cable.
Specifications
Currently the latest firmware versions are listed below. If you are using an older version than these, we recommend upgrading to a newer version.
(Common to BT6065 and BT6075)
Version: V1.06
Version Upgrade History
V1.06 2026/09/08
Bug fixes
Fixed an issue where values outside the accuracy specifications were displayed when performing zero adjustment, differential adjustment, or DC voltage self-calibration under specific conditions.
V1.05 2025/07/22
Bug Fixes
Fixed a bug that caused DCV measurement updates to stop.
V1.02 2025/03/13
Bug Fixes
Fixed a bug that the measured value may be out of accuracy when measuring using the trigger signal from external I/O (EXT. I/O).
V1.01 2024/04/26
Initial release