RM2612 RESISTANCE CALCULATION SOFTWARE
V1.04 Feb 25, 2025
- If you are unable to download software, please check the following:
- Please register a my HIOKI account and then use it to log in to the my HIOKI service.
- Product firmware (product upgrades) and computer application software can only be downloaded for products you have registered on the my HIOKI service.
| Application (setup_RM2612App_v1.04.exe) |
|---|
○ Latest software is posted. Keep the instruction manual up-to-date.
○ Do not perform the following operations during the upgrade. Repair is required.
・ Turn off the main unit.
・ Remove the media.
Version Upgrade History
V1.04 (February 2025)
○ Version Update
・Added a feature to display the probe number and troubleshooting method on the screen when an abnormality is detected during RM9004 OPEN/SHORT inspection.
・Added a feature to display a maintenance prompt image for the probe when the number of potential measurements reaches a multiple of the set number.
・Improved the system to output the error status in the calculation result file and the history section within the app in cases of contact abnormalities, current abnormalities, integrity abnormalities, and analysis errors. No changes have been made to the analysis model.
・Changed the default setting for contact check results and calculation result file output from OFF to ON.
・Improved the system to automatically search for RM2611 connected to the PC and configure communication settings upon starting RM2612.
・Fixed a bug where incorrect values might be recorded in the output file for Contact check-V, Contact check-I, and Error data. This bug does not affect the analysis values.
・Fixed a bug where the progress display of the analysis was not showing the correct values. This bug does not affect the analysis values.
・Other minor changes.
V1.03 (November 2020)
・Version upgrade
Enabled to run with standard Windows USB driver on Windows 10 PC.
After selecting a communicable device, display the serial number with the tooltip of the Combo box.
Other minor improvements.
※This version upgrade does not affect the calculated values (interface resistance, composite volume resistivity).
V1.02 (March 2020)
・Version upgrade
Added 10MΩ range
Changed the calculation method of "Variation"
Other minor improvements
※This version upgrade does not affect the calculated values (interface resistance, composite volume resistivity).
V1.01 (October 2019)
Version upgrade(Simplified Chinese and Korean languages added)
V1.00 (June 2019)
First public
Operating Environment
OS:Windows 7(32bit / 64bit), Windows8(32bit / 64bit), Windows 10(32bit / 64bit), Windows 11 *Microsoft .NET Framework 4.8 is required.