Search Results

Rated current

800 A AC/DC

Frequency band

DC to 4 MHz (Model CT6904A-2)

DC to 2 MHz (Model CT6904A-3)

• High-accuracy sensor using the zero flux method and flux gate detection
• Capture current signals from inverter motors, power conditioners for PV, charging facilities for EVs
• Automatic Phase Correction

Rated current

500 A AC/DC

Frequency band

DC to 4 MHz (CT6904A)

DC to 2 MHz (CT6904A-1)

• High-accuracy sensor using the zero flux method and flux gate detection
• Capture current signals from inverter motors, power conditioners for PV, charging facilities for EVs
• Automatic Phase Correction

Rated current

200 A AC/DC

Frequency band

DC to 10 MHz

• High-accuracy sensor using the zero flux method and flux gate detection
• Capture current signals from inverter motors, power conditioners for PV, charging facilities for EVs
• Automatic Phase Correction

• 1 nΩ resolution for ultra-low resistance testing
• Stable measurement during post-weld temperature changes (A-TC)
• Offset control for temperature-sensitive environments (A-OVC)
• Active protection against overvoltage inputs (ACP)
• Maximum 9 Ω lead resistance tolerance for flexible system layout
• For EV and ESS battery modules and pack manufacturing

• 0.1 μΩ to 120.0000 MΩ
• 0.9 ms fastest measurement speed
• Low-stress measurement for 0201-size ultra-small components

• For chip resistors and chip ferrite beads production
• Equipped with ΔR function for visualizing process variations

Type

Horizontal type both sides

Number of arms

4 (2 each, top & bottom)

Equipped with

Automatic board conveying system

• 4-wire low-resistance measurement of state-of-the-art IC substrates
• High-precision probing on ultra-fine pads
• Compatible with automatic loading & unloading system

EIS measurement frequency

0.01 Hz to 10 kHz

• For EIS measurement of high-capacity batteries for EVs & ESSs
• Convenient evaluation application software for R&D use
• For production lines

For AC partial discharge detection

1000:1 high voltage divider from high accuracy voltage measurement to surge PD testing
• Divides up to 5 kV rms/7.1 kVpeak input voltage at a 1000:1 ratio
• Wideband frequency response: DC to 10 MHz (–3 dB)
• High-accuracy voltage conversion: ±0.3% measurement accuracy (DC, 45 Hz to 66 Hz)

EIS measurement

0.01 Hz to 100 kHz

Number of input channels

Up to 8

• Improve evaluation cycles with high-speed EIS measurement
• Apply up to 20 A DC without a booster; supports cell measurement at high current densities
• Easy integration with existing evaluation equipment

Quantitative evaluation of electronic conductivity using:

DCR

Rratio

Uniformity

• Dedicated measuring instruments & software designed for impedance measurement of LIB electrode slurry

Channels

4ch, DC, or 1P2W to 3P4W

Frequency band

DC, 0.1 Hz to 600 kHz

Power accuracy (50 Hz/60 Hz)

0.03% of reading + 0.01% of range

• WLTP (Worldwide harmonized Light vehicles Test Procedure) testing
• DC-DC converter efficiency measurements

Max channels

32 Analog ch to 64 Logic ch

Max. sampling rate

20 MS/s

Memory capacity

512 Megawords

• Operation testing and evaluation of inverters and UPS during load fluctuation and switching
• Analyze the relationship between engine control and vibration during vibration testing
• Identify power fluctuations when power supply is cycled

Output channels

CH1 to CH4 (SW2001-04)

CH1 to CH8 (SW2001-08)

CH1 to CH16 (SW2001-16)

• Durable multiplexer for comprehensive motor testing systems
• A single multiplexer that lets you consolidate six different tests

Rated current

500 A AC/DC

Frequency band

DC to 50 kHz

Clamp conductor

φ20 mm

• For vehicle power testing
• Compliant with WLTP & SAE J1634 Standards

Rated current

200 A AC/DC

Frequency band

DC to 50 kHz

Clamp conductor

φ20 mm

• For vehicle power testing
• Compliant with WLTP & SAE J1634 Standards

Frequency range

DC, 1 mHz to 5 MHz

Compressing (load) range

Up to 60 kN

Up to 764 MPa when using SA9004-01 electrode φ10 mm

• All-in-one solution for powder material evaluation of solid-state batteries & dry processes in a glove box environment
• Safety ensured with no hydrogen sulfide gas leakage and material alteration

Parameters

Impedance (R,X,θ,Z), Voltage (V), Current (I)

Number of input channels

Up to 8 ch

Electrolysis current

Max. 500 A

• For R&D, analysis of electrolysis cells
• Wide compatibility: supports electrolysis cell types including PEM, SOEC, AEM, AWE, etc.

• Safe inspection of solar installations with high voltage
• Enables high voltage measurement up to CAT Ⅲ 2000 V

Basic accuracy

0.02%

Max. resolution

0.1 µΩ

Max. testing current

1 A

• High-precision handheld resistance meter measuring from 0.1 µΩ to 3.5 MΩ
• Versatile applications: ideal for EV, aircraft, & motor/transformer maintenance with various probe options