Impulse Winding Tester Sample Application

V1.02 Dec 13, 2019

The copyright to the executable program file and associated documents is owned by HIOKI E.E. CORPORATION. This utility may not be bundled with software or other publications which are sold for profit without the express written permission of the copyright owner.
Further, this product may not be modified without the express written permission of the copyright owner.

HIOKI disclaims any and all responsibility for any consequences arising out of use of this software.

Application (IWTSampAppEN102.zip)

Specifications

Impulse Winding Tester Sample Application is sample application software for the impulse winding tester.

This application has the following functions:
・Setting the test conditions and the judgment conditions
・Executing the voltage calibration
・Executing the tests
・Displaying the waveform graph and the graph of the LC and RC area judgment values
・Saving the waveform graph and the graph of the LC and RC area judgment values
・Displaying the voltage values and the discharge quantities
・Saving the voltage values and the discharge quantities
・Displaying the judgment results
・Saving the judgment results
・Displaying the test conditions
・Saving the test conditions
・Selecting the tables
・Capturing the screen
・Loading the test data
・Saving the test data

Please refer to "Impulse Winding Tester Sample Application Users Manual EN01.pdf" how to use this application.
Functions added in firmware V1.10 and later for ST4030A and ST4030 are not supported.
When using applications with firmware V1.10 and later, it may be necessary to initialize the settings.

Installation Procedure

1. Click [DOWNLOAD] and download the file.
2. Decompress the download file.
3. Double click the "IWTSampAppEN102.msi" file and follow the instructions appearing on the screen.

Version Upgrade History

V1.02 (November 2019)
 Correspond to ST4030A and ST4030 V1.03.

V1.01 (September 2019)
 Correspond to ST4030 V1.02.

V1.00 (April 2019)
 First Release

Operating Environment

Windows 7(32-bit or 64-bit), Windows 8(32-bit or 64-bit), Windows 10(32-bit or 64-bit)
.NET Framework 4.6