BATTERY HiTESTER BT3562

3 mΩ to 3000 Ω/60V DC Battery Testers for Production Line Testing of Battery Packs and Modules

Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The BT3562 can measure the voltage and resistance of coin-size to large-cell batteries up to 60V almost simultaneously due to their quick response time.

BT3562 Battery HiTester Introductory Video

Key Features

  • Measure the voltage of battery packs up to 60 V
  • Production line testing of high-voltage battery packs and battery modules
  • Large (low-resistance) cell testing
  • Choice of PC interfaces for full remote operation

    Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user.

Model No. (Order Code)

BT3562 Discontinued
BT3562-01 Built in GP-IB and analog output
Note: Measurement leads are not included. Purchase the appropriate lead option for your application separately. The male (system side) of the EXT I/O connector is also available. Please contact your authorized Hioki distributor or reseller.

Ideal for a diverse array of battery products and testing needs

• General battery pack testing
• Battery module testing
• Large (low-resistance) cell testing
• High-speed mass production testing of coin batteries
• Fuel cell stack measurements
• Battery research and development measurement applications

High-speed interfaces fully prepared for automatic production lines

The fastest 10 ms measurement data can be transferred via the standard RS-232C interface at up to 38,400 bps. (BT3562-01 includes a GP-IB interface.)

Use the interfaces to control triggering, measurement configuration loading, and zero adjustment from an external source. Output signals provide comparator results, end-of-measurement events, and measurement error information.

The De Facto Standard of Battery Testers

The HIOKI BT356x series
These highly advanced battery testers are best suited for shipping and acceptance inspections of cells and battery packs. They simultaneously measure internal resistance and the battery’s open-circuit voltage (OCV).

Since the AC-IR measurement method is used, the measurement time is shortened. In addition, highly repeatable results are attained with this method. These testers have a highly accurate 3 mΩ range, allowing for a resistance measurement of battery tab welding and bus bars. All of this combines for the best choice in battery testers.

High input voltage applications The input high voltage (1,000 V) model, BT3564, can measure the total resistance of the battery whole pack at once.

*Watch with the video subtitles on, to see detailed descriptions.

Basic specifications

Accuracy guaranteed: 1 year, Accuracy guarantee period after adjustment made by Hioki: 1 year
Max. applied measurement voltage ± 60 V DC rated input voltage
± 70 V DC Max. rated voltage to earth
Resistance measurement ranges 3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges
Accuracy: 30 mΩ to 3000 Ω ranges, ± 0.5% rdg. ± 5 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
3 mΩ range, ± 0.5% rdg. ± 10 dgt. (Add ± 30 dgt. for EX.FAST, or ± 10 dgt. for FAST, or ± 5 dgt. for MEDIUM)
Testing source frequency: 1 kHz ± 0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3000 Ω range)
Open-circuit Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3000 Ω ranges)
Voltage measurement ranges 6 VDC (resolution 10 μV) to 60 VDC (resolution 100 μV), 2 ranges
  Accuracy: ± 0.01% rdg. ± 3 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
Display 31000 full digits (resistance), 600000 full digits (voltage), LED
Sampling rate Four steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow)
(Typ., sampling time depends on supply frequency settings and function.)
Measurement time Response time + sampling rate, approx. 10 ms for measurements
(Response time depends on reference values and the measurement object.)
Comparator functions Judgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.)
Analog output Measured resistance (displayed value, from 0 to 3.1 V DC, -01 suffix models only)
Interfaces External I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only)
Power supply 100 to 240 VAC, 50/60 Hz, 30 VA max.
Dimensions and mass 215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)
Accessories Instruction manual ×1, Power cord ×1

Measurement leads A (3)

(for measuring high voltage batteries)

About probe length
A: From junction to probe
B: Probe part
L: Whole length

Measurement Leads B (for measuring batteries up to 60 V) (1)

1.8 mm dia. single-axis type for measuring small electrodes

About probe length
A: From junction to probe
B: Probe part
L: Whole length

Measurement Leads B (for measuring batteries up to 60 V) (1)

0.2 mm parallel pyramid-type pins for measuring at thru holes and sub-millimeter objects

About probe length
A: From junction to probe
B: Probe part
L: Whole length

Measurement Leads C (for measuring batteries up to 60 V) (3)

About probe length
A: From junction to probe
B: Probe part
L: Whole length

Zero adjustment board (1)

Can not be used for PIN TYPE LEAD 9770, 9771

PC communication (2)


Related Products