BATTERY TESTER BT3554 (Built-in Bluetooth® wireless technology)

Even Speedier Diagnosis of the Deterioration of Lead-acid Batteries

Discontinued

BT3554-50: With or without and the type of Pin Type Lead is selected by the order code.

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals. The BT3554-01 and BT3554-11 are built in with Bluetooth® wireless technology for easily transferring data on mobile devices.

Key Features

  • Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
  • Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage
  • Noise reduction technology improves noise resistance
  • Analyze battery health in real time using Bluetooth® wireless technology
  • New protector delivers better ergonomic hold and durability in the field.
  • (1)The thresholds for determining the pass/fail condition of a battery depends on the specifications and standards of the battery manufacturer, battery type, capacity, etc. It is important and necessary to always conduct battery testing against the internal resistance and terminal voltage of a new or reference battery.
  • (2)In some cases, it may be difficult to determine the deterioration state of traditional open type (liquid) lead-acid or alkaline batteries which demonstrate smaller changes in internal resistance than sealed lead acid batteries.

Model No. (Order Code)

BT3554-01 Discontinued, bundled Pin Type Lead 9465-10, built-in Bluetooth(R) wireless technology
BT3554-11 Discontinued, bundled Pin Type Lead L2020, built-in Bluetooth(R) wireless technology
For the latest information about countries and regions where wireless operation is currently supported, please see the "Specifications".
Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.

Data can be downloaded to tablets and smartphones using Hioki’s dedicated free app "GENNECT Cross," available from the Google Play or App Store.

Get Results in as Fast as 2 Seconds

Simply touch the test leads to the battery terminals to easily capture battery condition data with the Hioki BT3554 Battery Tester. Automatically save measurements results using the auto-hold or auto-memory function in just 2 seconds, a 60% reduction from the legacy product.

How to use Battery Testers: Observing Measurement Results Captured Wirelessly on a Mobile Device

Measured values captured by the Hioki BT3554 Battery Tester with built-in Bluetooth wireless technology can be displayed and saved onto a mobile device wirelessly. The results can also be used to create automatic reports. Simply install the free GENNECT Cross app onto your mobile device and connect to the Hioki BT3554. Reports created on your mobile device can even be e-mailed to the office to further increase work efficiency. Data uploaded by the Gennect Cross app can also be loaded into a PC to view the historical state of the specified battery as a graph.

Bluetooth wireless technology is available in North America, the EU, Japan and other countries. For an updated list of supported countries, please go to www.hioki.com.

Generating comparative judgments based on a lead-acid battery’s internal resistance and voltage

By using its comparator function to simultaneously measure the internal resistance and voltage of a lead-acid, nickel-cadmium, or nickel-hydride battery, the BT3554 can generate comparative judgments quantifying degradation of the cell based on user-specified threshold values.

Saving data easily just by placing the leads in contact with a battery’s terminals

The BT3554’s auto-hold function automatically holds measured values once they stabilize. The instrument’s auto-memory function, which automatically stores measured values resulting from the auto-hold function in its internal memory, further streamlines work tasks.

Instantly create reports by a free app (GENNECT Cross)

The BT3554-01 and BT3554-11 feature both Bluetooth® wireless technology. Measurement data loaded onto a tablet or smartphone can be viewed using templates and graphed to allow assessment of data by the cubicle (up to 500 data points). In addition, the app makes it possible to instantaneously create reports while in the field.

Click here for details about GENNECT Cross

The Best Choice Just Got Better: Speedy diagnosis of lead-acid battery deterioration status

Why switch to the BT3554 from the 3554?
Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554.
The same reliable instantaneous degradation diagnosis of lead-acid batteries (PASS, WARNING, FAIL) by measuring internal resistance and voltage Determine the health of your batteries even in high noise environments with the BT3554’s improved noise reduction technology.

Quicker and easier contact with battery racks using the longer and improved L-shaped probe (the L2020)

*Watch with the video subtitles on, to see detailed descriptions.

Basic specifications (BT3554-01, BT3554-11)

Accuracy guaranteed: 1 year
Resistance measurement range 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
Accuracy: ±0.8 % rdg. ±6 dgt. (3 mΩ range: ±1.0 % rdg. ±8 dgt.)
Testing source frequency: 1 kHz ±30 Hz, With function for avoiding noise
frequency enabled: 1 kHz ±80 Hz, Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range), Open terminal Voltage: 5 V peak
Voltage measurement range ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg. ±6 dgt.
Absolute max. input voltage 60 V DC max. (No AC input)
Display update rate Approx. 3 times/s
Comparator functions Resistance warning limit / failure limit, and voltage warning limit setting; Number of comparator setting: 200 sets, Beeper sound, PASS/WARNING or FAIL
Data storage Max. storable data: 6000 sets. (Saved items: Date, time, resistance value, voltage value, temperature, comparator setting values, and comparator judgement.)
Communication interface Via USB (forward the data to the PC, bundled software)
Built-in Bluetooth® 4.0 LE, supports tablets and smart phones with iOS 10 or Android™4.3 or later
GENNECT Cross (Freeware): Display list of measured values, generate reports, or display the trend (on the PC only)
Other functions Temperature measurement (-10.0 to 60.0 °C), Zero-adjustment, Hold, Auto-hold, Auto-memory, Auto-power-save, Clock
Power supply LR6 (size AA) alkaline battery ×8
Rated supply voltage: 1.5 V DC × 8
(Nickel metal hydride batteries may be used. However, the battery life display is not supported in this configuration.)
Continuous operating time: 8.5 hr
Dimensions and mass 199 mm (7.83 in)W × 132 mm (5.20 in)H × 60.6 mm (2.39 in)D (with protector), 947 g (33.4 oz) (including batteries and protector)
Included accessories Zero adjustment board ×1, Instruction manual ×1, Application software CD ×1, Power-on option sticker ×1, Carrying case ×1, LR6 (AA) alkaline batteries ×8, Spare fuse ×1, USB cable ×1, Neck strap ×1, Protector ×1
Precautions concerning use of equipment that emits radio waves ×1, Pin Type Lead 9465-10 ×1 (Bundled with the BT3554-01), Pin Type Lead L2020 ×1 (Bundled with the BT3554-11)

Countries and regions where wireless operation is currently supported (BT3554-01, BT3554-11)

Last update: October 9, 2020
Countries and regions where wireless operation is currently supported Australia, Austria, Belgium, Bulgaria, Canada, Chile, China, Colombia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Italy, Japan, Kenya, Korea, Latvia, Liechtenstein, Lithuania, Luxembourg, Macao, Malta, Mexico, Myanmar, Netherlands, New Zealand, Norway, Peru, Philippines, Poland, Portugal, Romania, Singapore, Slovakia, Slovenia, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Thailand, Turkey, United Kingdom, United States, Viet Nam
Note Use of devices that emit radio radiation requires approval in the country of use. Thus, use of the instrument in a country or region where they have not been approved may be subject to penalty as a violation of law.

Measurement Leads A (3)

Primarily for use with lead acid batteries, easy 4-terminal measurement, 2.7 mm dia. single-axis type

A: From junction to probe, B: Probe part, L: Whole length

Measurement Leads B (2)

Primarily for use with lead acid batteries, large angle of probe application, 2.5 mm pitch 2-axis pin type

A: From junction to probe, B: Probe part, L: Whole length

Measurement Leads C (3)

A: From junction to probe, B: Probe part, L: Whole length

Option (2)

0 ADJ BOARD: Use commercially available hook-and-loop fasteners when securing to the carrying case.


Related Products