LCR HiTESTER 3511-50

option

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The 3511-50 is a compact, general purpose LCR meter for on-board testing of capacitors and coils used in electrical equipment and devices such as automotive-related components.

Key Features

High speed measurement: 5 ms (1 kHz) or 13 ms (120 Hz)
Built-in high-speed comparator
Measurement frequency: 1 kHz/120 Hz selectable
From minute measurement with a maximum resolution of 0.001 pF to high-capacity measurement up to 1 F (depending on measurement frequency)

Model No. (Order Code)

3511-50	Measurement frequencies: 120 Hz and 1 kHz

This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.

Basic specifications

Accuracy guaranteed: 6 months

Measurement parameters	\|Z\|, θ, R, C, L, D (tanδ), Q
Measurement range	\|Z\|, R: 10 mΩ to 200.00 MΩ θ: -90.00° to +90.00° C (at 120 Hz): 9.40 pF to 999.99 mF, C (at 1 kHz): 0.940 pF to 99.999 mF L (at 120 Hz): 14.00 µH to 200.00 kH, L (at 1 kHz): 1.600 µH to 20.000 kH D: 0.0001 to 1.9900, Q: 0.85 to 999.99
Basic accuracy	\|Z\| : ±0.08 % rdg. θ: ±0.05°
Measurement frequency	120 Hz or 1 kHz
Measurement signal level	50 mV, 500 mV, 1 V rms
Output impedance	50 Ω
Display	LED (5-digit display, full-scale count depends on range)
Measurement time	Fast: 13 msec, Normal: 90 msec, Slow: 400 msec. (at 120 Hz) Fast: 5 msec, Normal: 60 msec, Slow: 300 msec. (at 1 kHz)
DC bias	DC voltage/DC current can be superimposed on the measurement signal. (Requires optional unit and external constant voltage source/constant current source.)
Functions	Panel save and load function, Comparator, External input/Output (EXT. I/O), GP-IB (option) or RS-232C interface
Power supply	Selectable 100, 120, 220 or 240V AC ±10%, 50/60Hz, 20VA max.
Dimensions and mass	210 mm (8.27 in) W × 100 mm (3.94 in) H × 168 mm (6.61 in) D, 2.5 kg (88.2 oz)
Included accessories	Instruction manual × 1, Power cord × 1, Spare fuse × 1

Probe and Test fixtures (13)

Note: The 9268-01 cannot use with the 3511-50, using with the 9268/9269, Not CE marked

SMD TEST FIXTURE IM9100

Learn more

• Direct-connection testing
• Test SMDs with electrodes on the bottom
• DC to 8MHz（Can be measured up to 10 MHz, when combined with the special order model IM3536-01）
• Measurable sample sizes: Metric (Inch): 0402 (01005), 0603 (0201), 1005 (0402)

SMD TEST FIXTURE IM9110

Learn more

• For direct connection two-wire testing
• DC to 1 MHz
• Measurable sample size: 008004 (inch)

CONTACT TIPS IM9901

To replace the tip on the L2001, regular size, bundled with the L2001

CONTACT TIPS IM9902

To replace the tip on the L2001, small size

PINCHER PROBE L2001

Learn more

• DC to 8MHz, 50Ω termination
• Tip electrode spacing: 0.3 to 6 mm
• Measurable sample sizes: 0201 to 2220 (inch)

4-TERMINAL PROBE 9140

DC to 100 kHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω

CONNECTION CORD 9165

Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length

CONNECTION CORD 9166

Metal BNC to clip, 1.5 m (4.92 ft) length

TEST FIXTURE 9261

DC to 8 MHz, 1 m (3.28 ft) length, impedance characteristics of 75 Ω

TEST FIXTURE 9262

Direct connection type, DC to 8 MHz（Can be measured up to 10 MHz, when combined with the special order model IM3536-01）, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)

SMD TEST FIXTURE 9263

Direct connection type, DC to 8 MHz（Can be measured up to 10 MHz, when combined with the special order model IM3536-01）, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)

SMD TEST FIXTURE 9677

Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)

SMD TEST FIXTURE 9699

Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high