Current Probes, Sensors | Non-contact voltage probe,CAN sensors

Non-contact voltage probe, Non-contact CAN sensors

Non-contact CAN sensor  SP7001, SP7002


NON-CONTACT CAN SENSOR   SP7001, SP7002

• Innovative non-contact CAN/CAN FD sensor that improves testing productivity

Non-contact CAN sensor  SP7001, SP7002

• Capture signals without affecting CAN bus or ECUs • No need to alter vehicle cables • High-sensitivity mode for hard to detect signals

NON-CONTACT AC VOLTAGE PROBE SP3000 | SP9001

NON-CONTACT AC VOLTAGE PROBE   SP3000

• Capture voltage signals from outside the wire cover

NON-CONTACT AC VOLTAGE PROBE SP3000 | SP9001

• Supports φ1mm to 2.5mm covered wires • 10Hz to 100kHz frequency bandwidth • 5Vrms 14Vp-p rated measurement voltage



Wide-band Current Probes, DC to 120 MHz

Current Probe CT6710

CURRENT PROBE   CT6710

• High-sensitivity for observing micro currents down to 0.5A
• Ideal for developing switching power supplies
• High S/N ratio

Current Probe CT6710

• DC to 50 MHz (−3dB), ±3.0% accuracy • Maximum 30 A rms, 3 ranges • ±50 A peak (non-continuous)

Current Probe CT6711

CURRENT PROBE   CT6711

• High-sensitivity for observing micro currents down to 0.5A
• Ideal for developing switching power supplies
• High S/N ratio, high frequency

Current Probe CT6711

• DC to 120 MHz (−3dB), ±3.0% accuracy • Maximum 30 A rms, 3 ranges • ±50 A peak (non-continuous)

Current Probe CT6700

CURRENT PROBE   CT6700

• High-sensitivity for observing micro currents down to 1 mA
• Ideal for developing switching power supplies, inverts and motor controllers
• High S/N ratio

Current Probe CT6700

• DC to 50 MHz (−3dB), ±3.0% accuracy • Maximum 5 A rms • ±7.5 A peak (non-continuous)

Current Probe CT6701

CURRENT PROBE   CT6701

• High-sensitivity for observing micro currents down to 1 mA
• Ideal for developing switching power supplies, inverts and motor controllers
• High S/N ratio, high frequency

Current Probe CT6701

• DC to 120 MHz (−3dB), ±3.0% accuracy • Maximum 5 A rms • ±7.5 A peak (non-continuous)

Current Probe | CLAMP ON PROBE 3273-50

CLAMP ON PROBE   3273-50

• Observe currents down to 10 mA
• High S/N ratio
• Ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers

Current Probe | CLAMP ON PROBE 3273-50

• DC to 50MHz (−3dB), ±1.0% accuracy • Maximum 30 A rms • ±50 A peak (non-continuous)

Current Probe | CLAMP ON PROBE 3276

CLAMP ON PROBE   3276

• Observe currents down to 10 mA
• Ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers
• High S/N ratio, high frequency

Current Probe | CLAMP ON PROBE 3276

• DC to 100 MHz (−3dB), ±1.0% accuracy • Maximum 30 A rms • ±50 A peak (non-continuous)

Current Probe | CLAMP ON PROBE 3275

CLAMP ON PROBE   3275

• High S/N ratio
• Directly connect to high impedance BNC input of oscilloscope or recorder
• Ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers

Current Probe | CLAMP ON PROBE 3275

• DC to 2MHz (−3dB), ±1.0% accuracy • Maximum 500 A rms • ±700 A peak (non-continuous)

Current Probe | CLAMP ON PROBE 3274

CLAMP ON PROBE   3274

• High S/N ratio
• Directly connect to high impedance BNC input of oscilloscope or recorder
• Ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers

Current Probe | CLAMP ON PROBE 3274

• DC to 10MHz (−3dB), ±1.0% accuracy • Maximum 150 A rms • ±300 A peak (non-continuous)



High-precision Current Sensors, DC to 4 MHz

Current Sensor | AC/DC CURRENT SENSOR CT6877

AC/DC CURRENT SENSOR   CT6877

• High-accuracy sensor using the zero flux method and flux gate detection
• High-current, high-speed EV, HEV inverter testing
• Measure battery charge/discharge and secondary side of inverter motors

Current Sensor | AC/DC CURRENT SENSOR CT6877

• DC to 1 MHz, ±0.04% accuracy • Rated 2000A AC/DC

Current Sensor | AC/DC CURRENT SENSOR CT6875

AC/DC CURRENT SENSOR   CT6875

• High-accuracy sensor using the zero flux method and flux gate detection
• Test inverter efficiency, inverter output power, reactor or transformer loss
• Ideal for long-term DC measurements

Current Sensor | AC/DC CURRENT SENSOR CT6875

• DC to 2MHz, ±0.04% accuracy • Rated 500A AC/DC

Current Sensor | AC/DC CURRENT SENSOR CT6876

AC/DC CURRENT SENSOR   CT6876

• High-accuracy sensor using the zero flux method and flux gate detection
• Test inverter efficiency, inverter output power, reactor or transformer loss
• Ideal for long-term DC measurements

Current Sensor | AC/DC CURRENT SENSOR CT6876

• DC to 1.5MHz, ±0.04% accuracy • Rated 1000A AC/DC

Current Sensor | AC/DC CURRENT SENSOR CT6904

AC/DC CURRENT SENSOR   CT6904

• High-accuracy sensor using the zero flux method and flux gate detection
• Capture current signals from switching power supplies, inverters % power conditioners

Current Sensor | AC/DC CURRENT SENSOR CT6904

• DC to 4 MHz, ±0.02% accuracy • Rated 500A AC/DC (up to 800 A special order available)

Current Sensor | AC/DC CURRENT PROBE  CT6846-05

AC/DC CURRENT PROBE   CT6846-05

• High accuracy clamp sensor for evaluating against WLTC and automotive new fuel economy standards
• EV/HEV battery charge and discharge efficiency testing
• Inverter and power conditioner conversion efficiency evaluations

Current Sensor | AC/DC CURRENT PROBE  CT6846-05

• DC to 20kHz, ±0.3% accuracy • Rated 1000A AC/DC

Measure Wide Bandwidth Current Directly and Accurately | PW9100

AC/DC CURRENT BOX   PW9100

• Test power conversion efficiency of motors, inverters, HEV, and renewable energy equipment

Measure Wide Bandwidth Current Directly and Accurately | PW9100

• Max. 50 A AC direct input to the PW6001/PW3390 • Wide DC to 3.5MHz, ±0.02% accuracy • PW9100-03: 3ch • PW9100-04: 4ch

Current Sensor | AC/DC CURRENT PROBE  CT6845-05

AC/DC CURRENT PROBE   CT6845-05

• Wideband and high-precision current probe for power efficiency testing
• Evaluate EV/HEV battery charge and discharge efficiency
• Measure inverter and power conditioner conversion

Current Sensor | AC/DC CURRENT PROBE  CT6845-05

• DC to 100kHz, ±0.3% accuracy • Rated 500 A AC/DC

Current Sensor | AC/DC CURRENT PROBE  CT6844-05

AC/DC CURRENT PROBE   CT6844-05

• Wideband and high-precision current probe for power efficiency testing
• Evaluate EV/HEV battery charge and discharge efficiency
• Measure inverter and power conditioner conversion efficiency

Current Sensor | AC/DC CURRENT PROBE  CT6844-05

• DC to 200kHz, ±0.3% accuracy • Rated 500A AC/DC

Current Sensor | AC/DC CURRENT SENSOR CT6862-05

AC/DC CURRENT SENSOR   CT6862-05

• Wideband, high-precision pass-through sensor with wide temperature range
• Evaluate solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters

Current Sensor | AC/DC CURRENT SENSOR CT6862-05

• DC to 1MHz, ±0.05% accuracy • Rated 50A AC/DC

Current Sensor | AC/DC CURRENT SENSOR CT6863-05

AC/DC CURRENT SENSOR   CT6863-05

• Wideband, high-precision pass-through sensor with wide temperature range
• Evaluate solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters

Current Sensor | AC/DC CURRENT SENSOR CT6863-05

• DC to 500kHz, ±0.05% accuracy • Rated 200A AC/DC

Current Sensor | AC/DC CURRENT SENSOR CT6841-05

AC/DC CURRENT PROBE   CT6841-05

• Wideband, high-precision current probe for power efficiency testing
• Evaluate EV/HEV battery charge and discharge efficiency
• Measure inverter and power conditioner conversion efficiency

Current Sensor | AC/DC CURRENT SENSOR CT6841-05

• DC to 1MHz, ±0.3% accuracy • Rated 20A AC/DC

Current Sensor | AC/DC CURRENT SENSOR CT6843-05

AC/DC CURRENT PROBE   CT6843-05

• Wideband, high-precision current clamp sensor for power efficiency testing
• Measuring the charge and discharge efficiency of EV/HEV batteries
• Evaluate inverter and power conditioner efficiency

Current Sensor | AC/DC CURRENT SENSOR CT6843-05

• DC to 500kHz, ±0.3% accuracy • Rated 200A AC/DC



AC/DC Current Sensors, DC to 20 kHz

DISPLAY UNIT CM7291

DISPLAY UNIT   CM7291 (Bluetooth®)

• Combine with CT7000 series AC/DC current sensors or output to data acquisition equipment

DISPLAY UNIT CM7291

• Bluetooth(R) wireless technology • Pair with CT7000 series • DCA, ACA, (DC+AC)A, frequency • WAVE, RMS, PEAK, Hz output

AC/DC Current Sensor | CT7631

AC/DC CURRENT SENSOR   CT7631

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ via Display Unit

AC/DC Current Sensor | CT7631

• DC to 10 kHz, ±1.0% accuracy • Rated 100 A AC/DC

AC/DC Auto-zero Current Sensor | CT7742

AC/DC AUTO-ZERO CURRENT SENSOR   CT7742

• Make measurements over extended periods of time without the need to perform zero-adjustment
• Ideal for measuring in locations with temperature variations

AC/DC Auto-zero Current Sensor | CT7742

• DC to 5 kHz, ±1.5% accuracy • Rated 2000A AC/DC

AC/DC Auto-zero Current Sensor | CT7736

AC/DC AUTO-ZERO CURRENT SENSOR   CT7736

• Make measurements over extended periods of time without the need to perform zero-adjustment
• Ideal for measuring in locations with temperature variations

AC/DC Auto-zero Current Sensor | CT7736

• DC to 5 kHz, ±2.0% accuracy • Rated 600A AC/DC

AC/DC Auto-zero Current Sensor | CT7731

AC/DC AUTO-ZERO CURRENT SENSOR   CT7731

• Make measurements over extended periods of time without the need to perform zero-adjustment
• Ideal for measuring in locations with temperature variations

AC/DC Auto-zero Current Sensor | CT7731

• DC to 5 kHz, ±1.0% accuracy • Rated 100A AC/DC

AC/DC Current Sensor | CT7642

AC/DC CURRENT SENSOR   CT7642

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ

AC/DC Current Sensor | CT7642

• DC to 10kHz, ±1.5% accuracy • Rated 2000 A AC/DC

AC/DC Current Sensor | CT7636

AC/DC CURRENT SENSOR   CT7636

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ

AC/DC Current Sensor | CT7636

• DC to 10kHz, ±2.0% accuracy • Rated 600 A AC/DC

DISPLAY UNIT CM7290

DISPLAY UNIT   CM7290

• Combine with CT7000 series AC/DC current sensors or output to data acquisition equipment

DISPLAY UNIT CM7290

• Pair with CT7000 series • DCA, ACA, (DC+AC)A, frequency • WAVE, RMS, PEAK, Hz output



AC Current Sensors, up to 50 kHz

AC Current Sensor | CLAMP ON SENSOR 9272-05

CLAMP ON SENSOR   9272-05

• Measuring AC current with low frequencies such as inverter control devices
• Wide bandwidth ideal for harmonic analysis, FFT analysis and waveform monitoring

AC Current Sensor | CLAMP ON SENSOR 9272-05

• 1Hz to 100kHz, ±0.3% accuracy • Rated 20A/200A AC/DC

Flexible AC Current Sensors in 3 Sizes | CT7040 series

AC FLEXIBLE CURRENT SENSOR   CT7040 series

• Flexible Rogowski sensor easy routes through confined locations and around thick cables
• Tapered tip designed to feed readily through tangled wires

Flexible AC Current Sensors in 3 Sizes | CT7040 series

• 10 Hz to 50 kHz, ±1.5% accuracy • 600A or 6000A AC rated

AC FLEXIBLE CURRENT SENSOR CT9667

AC FLEXIBLE CURRENT SENSOR   CT9667

• Rogowski type AC sensors in 3 different loop diameter sizes from 100 to 254 mm
• Battery or AC Adapter-powered to pair with any power meter or DAQ
• Thin coil easy to use in confined spaces and with complicated wiring

AC FLEXIBLE CURRENT SENSOR CT9667

• 10 Hz to 20 kHz, ±2% accuracy • Rated 5000 A/ 500 A AC

Current Sensors | CLAMP ON LEAK SENSOR 9675

CLAMP ON LEAK SENSOR   9675

• Leak current sensor with voltage output
• Pair with Hioki power logger or 2-channel data logger

Current Sensors | CLAMP ON LEAK SENSOR 9675

• 40 Hz to 5 kHz, ±1.0% accuracy • Rated 10 A AC, 100 mV/A output rate

Current Sensors | CLAMP ON LEAK SENSOR 9657-10

CLAMP ON LEAK SENSOR   9657-10

• Leak current sensor with voltage output
• Also measure load thanks to max. 30A continuous input

Current Sensors | CLAMP ON LEAK SENSOR 9657-10

• 40 Hz to 5 kHz, ±1.0 accuracy • Rated 10 A AC, 100 mV/A output rate

100A AC Current Sensors | CLAMP ON SENSOR 9695-03

CLAMP ON SENSOR   9695-03

• High accuracy AC current sensor with voltage output
• Measure inverter devices or commercial power lines
• Compact design fits in to narrow spaces

100A AC Current Sensors | CLAMP ON SENSOR 9695-03

• 40Hz to 5kHz, ±0.3% accuracy • Rated 100 A AC, 1 mV/A output rate

50A AC Current Sensors | CLAMP ON SENSOR 9695-02

CLAMP ON SENSOR   9695-02

• High accuracy AC current sensor with voltage output
• Measure inverter devices or commercial power lines
• Compact design fits in to narrow spaces

50A AC Current Sensors | CLAMP ON SENSOR 9695-02

• 40Hz to 5kHz, ±0.3% accuracy • Rated 50 A AC, 10 mV/A output rate

5A AC Current Sensors | CLAMP ON SENSOR 9694

CLAMP ON SENSOR   9694

• High accuracy AC current sensor with voltage output
• For inverter devices or commercial power lines
• For measuring the secondary side of 5A CTs

5A AC Current Sensors | CLAMP ON SENSOR 9694

• 40Hz to 5kHz, ±0.3% accuracy • Rated 5 A AC, 10 mV/A output rate

1000A AC Current Sensors | CLAMP ON SENSOR 9669

CLAMP ON SENSOR   9669

• High accuracy AC current sensor with voltage output
• For inverter devices or commercial power lines

1000A AC Current Sensors | CLAMP ON SENSOR 9669

• 40Hz to 5kHz, ±1.0% accuracy • Rated 1000 A AC, 0.5 mV/A output rate

500A AC Current Sensors | CLAMP ON SENSOR 9661

CLAMP ON SENSOR   9661

• High accuracy AC current sensor with voltage output
• For inverter devices or commercial power lines

500A AC Current Sensors | CLAMP ON SENSOR 9661

• 40Hz to 5kHz, ±0.3% accuracy • Rated 500 A AC, 1 mV/A output rate

100A AC Current Sensors | CLAMP ON SENSOR 9660

CLAMP ON SENSOR   9660

• High accuracy AC current sensor with voltage output
• For inverter devices or commercial power lines
• Compact design fits into narrow spaces

100A AC Current Sensors | CLAMP ON SENSOR 9660

• 40Hz to 5kHz, ±0.3% accuracy • Rated 100 A AC, 1 mV/A output rate



Load Current Sensors

Current Sensors | CLAMP ON PROBE 9132-50

CLAMP ON PROBE   9132-50

• General purpose wide range clamp sensor for monitoring current level
• 6 ranges to meet a diverse range of applications
• Capture waveforms to output to DMMs and Hioki Memory HiCorders

Current Sensors | CLAMP ON PROBE 9132-50

• 40 Hz to 1 kHz, ±3% accuracy • 20 to 1000A AC

Current Sensor | CLAMP ON PROBE 9018-50

CLAMP ON PROBE   9018-50

• General purpose wide range clamp sensor for monitoring current level
• 6 ranges and excellent phase characteristics to meet a diverse range of applications
• Record and analyze waveforms and harmonic signals

Current Sensor | CLAMP ON PROBE 9018-50

• 40 Hz to 3 kHz, ±1.5% accuracy • 10 to 500A AC • Max. 650 A rms continuous input

Current Sensors | CLAMP ON PROBE 9010-50

CLAMP ON PROBE   9010-50

• General purpose wide range clamp sensor for monitoring current level
• 6 ranges to meet a diverse range of applications
• Capture waveforms to output to DMMs and Hioki Memory HiCorders

Current Sensors | CLAMP ON PROBE 9010-50

• 40 Hz to 1 kHz, ±2% accuracy • 10 to 500 A AC • Max. 650 A rms continuous input



Power Supplies for Current Sensors

SENSOR UNIT CT9557

SENSOR UNIT   CT9557

• Power supply for current sensors when used as standalone sensors
• Output individual or single waveform from an aggregate of input waveforms
• Use with high precision sensors to measure equipment such as high-capacity solar power conditioners and inverters

SENSOR UNIT CT9557

• 4 channels, ±0.06% DC accuracy • Waveform, total waveform, and total RMS output

SENSOR UNIT CT9556

SENSOR UNIT   CT9556

• Power supply for current sensors when used as standalone sensors
• Use with high precision sensors to measure equipment such as high-capacity solar power conditioners and inverters

SENSOR UNIT CT9556

• 1 channel, ±0.2% DC accuracy • Waveform and RMS output

SENSOR UNIT CT9555

SENSOR UNIT   CT9555

• Power supply for current sensor when used as standalone sensor
• Use with high precision sensors to measure equipment such as high-capacity solar power conditioners and inverters

SENSOR UNIT CT9555

• 1 channel • Waveform output

For Current Probes | POWER SUPPLY 3269

POWER SUPPLY   3269

• Power supply for wideband current probes for output to Memory HiCorders or oscilloscopes

For Current Probes | POWER SUPPLY 3269

• 2 channels for CT6710 series or 4 channels for CT6700 and 3270 series • ±12 V output

For Current Probes | POWER SUPPLY 3272

POWER SUPPLY   3272

• Power supply for wideband current probes for output to Memory HiCorders or oscilloscopes

For Current Probes | POWER SUPPLY 3272

• 1 or 2 channels for CT6700 and 3270 series • ±12 V output