Home Products MEMORY HiCORDER 8860, 8861

MEMORY HiCORDER 8860, 8861

High-speed 16- or 32-channel Memory Recorders Offer Data Acquisition, Oscilloscope and Data Logger Functionality to Record Waveforms in Any Situation

Discontinued

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, vibration, weight, acceleration and rotation due to complete isolation between channels and from each channel to the ground. More than just a digital oscilloscope, the 8860-50 and 8861-50 memory recorders accommodate plug-and-play input modules to meet applications such as monitoring commercial power supplies, fault analysis of electrical equipment, evaluating electric vehicle chargers, and analyzing conveyor belt speeds.

Key Features

  • Built-in 80GB hard drive (no PC card slot)
  • A faster CPU greatly enhances instrument operability and response.
  • Multi-channel logging on up to 64 or 128 channels (Use with the 8958)
  • 20 MS/s high-speed sampling (Use with the 8956)
  • Various interfaces built-in: LAN/USB/Hard disk drive
  • Supports the new high-voltage input module for measuring high voltage directly

Model No. (Order Code)

8860-50 Discontinued, Main unit only, input modules up to 4 units
8860-51 Discontinued, PC card slot less, built in HD unit
8861-50 Discontinued, Main unit only, input modules up to 8 units
8861-51 Discontinued, PC card slot less, built in HD unit
Note: The 8860-51 and 8861-51 cannot operate alone. You must install one or more optional input modules in the unit.
Note: Memory boards are not built-in as a standard feature. Choose one board for Model 8860-51, and two of the same capacity for the 8861-51, for factory pre-installation.

Basic specifications

Accuracy guaranteed: 1 year
　 8860-51 8861-51
Number of input units Max. 4 units Max. 8 units
Number of channels Max. 16 analog channels (Max. 64 channels when using the 8958) + standard 16 logic channels Max. 32 analog channels (Max. 128 channels when using the 8958) + standard 16 logic channels
Measurement ranges (20 div full-scale) 5 mV to 20 V/div, 12 ranges (when using the 8956), Resolution : 1/100 of range 5 mV to 20 V/div, 12 ranges (when using the 8956), Resolution : 1/100 of range
Max. allowable input DC 400V (when using the 8956) DC 400V (when using the 8956)
Frequency characteristics DC to 10 MHz (-3dB, when using the 8956) DC to 10 MHz (-3dB, when using the 8956)
Time axis at memory function 5 µs to 5 min/div, 26 ranges, sampling period : 1/100 of range, external sampling, dual timebase possible
Measurement
functions		 MEM (high-speed recording) REC (real-time recording) REC & MEM (realtime recording + high-speed recording) FFT (frequency analysis) Real-time Save (records directly to storage media)
Storage memory capacity 12-bits × 32M-words/ch (1ch at 8860-51, 2ch at 8861-51) to 2M-words/ch (16ch at 8860-51, 32ch at 8861-51)
*Memory capacity can be expanded 32 times. (Optional memory board)
Removable storage USB 2.0 memory ×3, Hard disk drive (80 GB, built in the main unit) ×1 (No PC card slot)
Recording paper [Built in optional printer unit] A4: 216 mm (8.50 in) × 30 m (98.43 ft), or A6: 112 mm (4.41 in) × 18 m (59.06 ft) selectable, thermal paper roll, Recording speed : Max. 25 mm (0.98 in)/sec
Display 10.4-inch SVGA-TFT color LCD (800 × 600 dots)
External interfaces USB 2.0, LAN, Monitor output (15 pin D-sub output), *GP-IB is Not Available
Power supply 100 to 240 V AC (50/60 Hz) (220 VA max. printer not used)
12 V DC (use the DC power unit 9684 : option, factory installation only)		 100 to 240 V AC (50/60 Hz) (280 VA max. printer not used)
12 V DC (use the DC power unit 9684 : option, factory installation only)
Dimensions and mass 330 mm (12.99 in) W × 250 mm (9.84 in) H × 184.5 mm (7.26 in) D, 8 kg (282.2 oz) (printer not installed) 330 mm (12.99 in) W × 250 mm (9.84 in) H × 284.5 mm (11.20 in) D, 10.5 kg (370.4 oz) (printer not installed)
Included accessories Quick Start Manual × 1, Input Module Guide × 1, Instruction Manual × 1, Analysis and Communication Supplement × 1, Application Disk (WaveViewer Wv, communication commands table) × 1, Power cord × 1, Input cord label × 1, Ferrite clamp (for LAN cable) × 1

LabVIEW and MATLAB support

Compatible models LabVIEW MATLAB script
8860-50 Available Available
8861-50 Available Available

Printer options (2)

RECORDING PAPER 9234

Roll type A6 width 112 mm (4.41 in) × 18 m (59.06 ft), 10 rolls/set

RECORDING PAPER 9231

Roll type A4 width 216 mm (8.50 in) × 30 m (98.43 ft), 6 rolls/set

Factory-installed options (A) (1)

*Must specify when ordering

Note: Choose one memory board for Model 8860-51, and two of the same capacity for the 8861-51, 80-GB HD drive is factory pre-installation.

HD UNIT 9718-50

Built in type, 80 GB

Factory options (B) (0)

*Must specify when ordering

* Only one of either the DC Power Unit 9684 or Probe Power Unit 9687 can be installed at any one time. Please contact your Hioki representative if concurrent installation is required.

Factory options (C) (0)

*Must specify when ordering

* Either the DC power unit 9684 or the probe power unit 9687 may be used. If you want to use both at the same time, consult us.

Input modules (1)

*Input cords are not included. Please purchase them separately. Install by inserting into the main unit. Can be replaced by user.

4ch ANALOG UNIT 8946

Learn more

• 4 ch, instantly waveforms
• Max. 30 Vrms or 60 VDC
• DC to 100 kHz bandwidth

Input cable (A) (4)

*Voltage is limited to the specifications of the input modules in use

ALLIGATOR CLIP L9790-01

Red/black set attaches to the ends of the Connection Cord L9790

CONNECTION CORD L9790

• Flexible φ 4.1 mm (0.16 in) thin dia.
• Cable allowing for up to 600 V input
• 1.8 m (5.91 ft) length

CONTACT PIN 9790-03

Red/black set attaches to the ends of the Connection Cord L9790

GRABBER CLIP 9790-02

Red/black set attaches to the ends of the Connection Cord L9790

Input cable (B) (3)

*Voltage is limited to the specifications of the input modules in use

CONNECTION CORD L9198

•φ 5.0 mm (0.20 in) dia.
•Cable allows for up to 300 V input
•1.7 m (5.58 ft) length
•Small alligator clip

CONNECTION CORD L9197

•φ 5.0 mm (0.20 in) dia
•Cable allows for up to 600 V input
•1.8 m (5.91 ft) length
•Includes detachable large alligator clips

GRABBER CLIP L9243

Attaches to the tip of the banana plug cable, Red/Black: 1 each, 185 mm (7.28 in.) length, CAT II 1000 V

Input cord (C) (1)

*Voltage is limited to the specifications of the input modules in use

10:1PROBE 9665

Learn more

・1 kV rms Max. (500 kHz or less)
・Max. rated voltage to earth depends on input unit.

Input cable (D) (2)

*Voltage to ground is within this product's specifications. Separate power source is also required.

DIFFERENTIAL PROBE P9000

Learn more

• Waveform only for exclusive use with Memory HiCorders (P9000-01) or waveform/RMS value switchable (P9000-02)
• For use with input of up to 1 kV AC/DC
• Requires separate power supply
AC ADAPTER Z1008

100 V to 240 V AC

Custom cable (0)

*For P9000. Inquire with your Hioki distributor.

(1) Bus powered USB cable
(2) USB(A)- Micro B cable
(3) 3-prong cable

Input cable (E) (3)

*Voltage to ground is within this product's specifications.

*For powering the 9322, AC Adapter 9418-15 or the 9687/9248 are required separately.

DIFFERENTIAL PROBE 9322

Learn more

• For up to 2 kV DC or 1 kV AC
• Frequency bandwidth up to 10MHz
AC ADAPTER 9418-15

100 to 240V AC

POWER CORD 9248

Power supply to the 9322 through this cord from the Probe power unit Z5021/9687, 70 cm (2.30 ft) length

Non-contact Voltage measuring (0)

Other options for Input (3)

CONVERSION ADAPTER 9199

Receiving side banana (female), output BNC (male)

CONNECTION CORD 9165

Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length

CONNECTION CORD L9217

Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length

Temperature sensor (0)

*For reference only. Please purchase locally.

Thermocouple

Logic signal measurement (3)

* Only the small terminal types can be used.

* The 9323 is not required for the small-terminal types 9327, 9320-01, 9321-01 and MR9321-01.

LOGIC PROBE 9320-01

Learn more

• 4 channels for contact voltage signals
• 500ns response
• Miniature terminal type
LOGIC PROBE 9327

Learn more

• 4 channels for contact voltage signals
• High-speed 100ns response
LOGIC PROBE MR9321-01

Learn more

• 4 isolated channels
• ON/OFF detection of AC/DC voltage
• Large terminal type

Up to 200 A (High precision) (2)

AC/DC CURRENT SENSOR CT6863-05

Learn more

• DC to 500kHz, ±0.05% accuracy
• Rated 200A AC/DC
CLAMP ON SENSOR 9272-05

Learn more

• 1 Hz to 100 kHz, ±0.3% accuracy
• Rated 20 A/200 A AC

Up to 1000 A (High precision) (0)

Power supply (1)

CONNECTION CORD L9217

Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length

Current sensors for the F/V Unit 8940 (4)

*To connect the current sensor via the conversion cable for the F/V Unit 8940, or using with the Power supply unit 9555-10.

*The 3274/3275/3276 cannot be used for the F/V Unit 8940.

CLAMP ON PROBE 3273-50

Learn more

• DC to 50MHz (−3dB), ±1.0% accuracy
• Maximum 30 A rms
• ±50 A peak (non-continuous)
CLAMP ON SENSOR 9272-05

Learn more

• 1 Hz to 100 kHz, ±0.3% accuracy
• Rated 20 A/200 A AC
CONVERSION CABLE 9318

To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length

CONVERSION CABLE 9319

To connect the 3273-50 and the 8940, Note: cannot be used with the 3274, 3275, 3276 to connect the 8940 via this cable 9319

10 mA class to 500 A (High speed) (4)

CLAMP ON PROBE 3273-50

Learn more

• DC to 50MHz (−3dB), ±1.0% accuracy
• Maximum 30 A rms
• ±50 A peak (non-continuous)
CLAMP ON PROBE 3274

Learn more

• DC to 10MHz (−3dB), ±1.0% accuracy
• Maximum 150 A rms
• ±300 A peak (non-continuous)
CLAMP ON PROBE 3275

Learn more

• DC to 2MHz (−3dB), ±1.0% accuracy
• Maximum 500 A rms
• ±700 A peak (non-continuous)
CLAMP ON PROBE 3276

Learn more

• DC to 100 MHz (−3dB), ±1.0% accuracy
• Maximum 30 A rms
• ±50 A peak (non-continuous)

Power supply (2)

* Necessary for use high speed current probes

POWER SUPPLY 3269

Learn more

• 2 channels for CT6710 series or 4 channels for CT6700 and 3270 series
• ±12 V output
POWER SUPPLY 3272

Learn more

• 1 or 2 channels for CT6700 and 3270 series
• ±12 V output

100 A to 2000 A (Medium speed) A (7)

DISPLAY UNIT CM7290

Learn more

• Pair with CT7000 series
• DCA, ACA, (DC+AC)A, frequency
• WAVE, RMS, PEAK, Hz output
AC/DC AUTO-ZERO CURRENT SENSOR CT7742

Learn more

• DC to 5 kHz, ±1.5% accuracy
• Rated 2000A AC/DC
AC/DC AUTO-ZERO CURRENT SENSOR CT7736

Learn more

• DC to 5 kHz, ±2.0% accuracy
• Rated 600A AC/DC
AC/DC AUTO-ZERO CURRENT SENSOR CT7731

Learn more

• DC to 5 kHz, ±1.0% accuracy
• Rated 100A AC/DC
AC/DC CURRENT SENSOR CT7642

Learn more

• DC to 10kHz, ±1.5% accuracy
• Rated 2000 A AC/DC
AC/DC CURRENT SENSOR CT7636

Learn more

• DC to 10kHz, ±2.0% accuracy
• Rated 600 A AC/DC
AC/DC CURRENT SENSOR CT7631

Learn more

• DC to 10 kHz, ±1.0% accuracy
• Rated 100 A AC/DC

100 A to 2000 A (Medium speed) B (0)

500 A to 5000 A (3)

*For commercial power lines, 50/60 Hz

AC FLEXIBLE CURRENT SENSOR CT9667

Learn more

• 10 Hz to 20 kHz, ±2% accuracy
• Rated 5000 A/ 500 A AC
CLAMP ON PROBE 9018-50

Learn more

• 40 Hz to 3 kHz, ±1.5% accuracy
• 10 to 500A AC
• Max. 650 A rms continuous input
CLAMP ON PROBE 9132-50

Learn more

• 40 Hz to 1 kHz, ±3% accuracy
• 20 to 1000A AC

Leak Current (2)

*For commercial power lines, 50/60 Hz

CONVERSION ADAPTER 9199

Receiving side banana (female), output BNC (male)

AC ADAPTER 9445-02

For USA, 100 to 240 V AC, 9 V/ 1 A

Up to 2000 A (Curent meter) (0)

*Clamp sensor sold separately

PC Software (2)

* The 9335 supports 8860-50/8860, 8861-50/8861 series MEM, REC and REC&MEM data recorded using single-axis sampling only.

WAVE PROCESSOR 9335

Learn more

• For the Memory HiCorder
• Convert data, print and display waveforms
LAN CABLE 9642

Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.4 ft.)

Cases (0)

  • No results were found.
  • No results were found.
  • No results were found.

User Support