Search Results

• 40 Hz to 1 kHz, ±2% accuracy
• 10 to 500 A AC
• Max. 650 A rms continuous input

• General purpose wide range clamp sensor for monitoring current level
• 6 ranges to meet a diverse range of applications
• Capture waveforms to output to DMMs and Hioki Memory HiCorders

• 600.0 mV to 1000 V DC/6.000 V to 1000 V AC
• 60.00 mA to 10.00 A DC and AC
• Low-pass filter function
• 10 A direct input
• AC current measurement with clamp-on probe

• 6000 count, general-purpose, multi-function DMM
• AC/DC voltage automatic detection

• Max. 4ch Analog + 8ch Logic
• 1M-Sampling/s
• Battery or AC-power

• Measure the startup current when a motor is powered on
• Record PLC timing
• Identify voltage drop during a power outage

・For the calibration of super megohmmeters
・Rated voltage DC1000V
・24 preset resistance values from 1 M to 10,000 MΩ
・Not CE Marked

・24-Point, 1,000VDC, 1 M to 10,000MΩ calibration box

• |Z|, L, C, R testing
• 4 Hz to 5 MHz
• 0.5 ms test speed, ±0.08% accuracy
• Single device solution for high speed testing and frequency sweeping

• Superior low-impedance repeatability
• Meet applications in low-ESR measurement

Rated current

800 A AC/DC

Frequency band

DC to 4 MHz (Model CT6904A-2)

DC to 2 MHz (Model CT6904A-3)

• High-accuracy sensor using the zero flux method and flux gate detection
• Capture current signals from inverter motors, power conditioners for PV, charging facilities for EVs
• Automatic Phase Correction

Rated current

500 A AC/DC

Frequency band

DC to 4 MHz (CT6904A)

DC to 2 MHz (CT6904A-1)

• High-accuracy sensor using the zero flux method and flux gate detection
• Capture current signals from inverter motors, power conditioners for PV, charging facilities for EVs
• Automatic Phase Correction

Rated current

200 A AC/DC

Frequency band

DC to 10 MHz

• High-accuracy sensor using the zero flux method and flux gate detection
• Capture current signals from inverter motors, power conditioners for PV, charging facilities for EVs
• Automatic Phase Correction

Max channels

32 Analog ch to 64 Logic ch

Max. sampling rate

20 MS/s

Memory capacity

512 Megawords

• Operation testing and evaluation of inverters and UPS during load fluctuation and switching
• Analyze the relationship between engine control and vibration during vibration testing
• Identify power fluctuations when power supply is cycled

Output channels

CH1 to CH4 (SW2001-04)

CH1 to CH8 (SW2001-08)

CH1 to CH16 (SW2001-16)

CH1 to CH24 (SW2001-24)

• Durable multiplexer for comprehensive motor testing systems
• A single multiplexer that lets you consolidate six different tests

Tests that can be performed

AC partial discharge testing

Surge partial discharge testing

• Dual partial-discharge detector with high noise resistance for EV motors

Rated current

500 A AC/DC

Frequency band

DC to 50 kHz

Clamp conductor

φ20 mm

• For vehicle power testing
• Compliant with WLTP & SAE J1634 Standards

Rated current

200 A AC/DC

Frequency band

DC to 50 kHz

Clamp conductor

φ20 mm

• For vehicle power testing
• Compliant with WLTP & SAE J1634 Standards

Frequency range

DC, 1 mHz to 5 MHz

Compressing (load) range

Up to 60 kN

Up to 764 MPa when using SA9004-01 electrode φ10 mm

• All-in-one solution for powder material evaluation of solid-state batteries & dry processes in a glove box environment
• Safety ensured with no hydrogen sulfide gas leakage and material alteration

Parameters

Impedance (R,X,θ,Z), Voltage (V), Current (I)

Number of input channels

Up to 8 ch

Electrolysis current

Max. 500 A

• For R&D, analysis of electrolysis cells
• Wide compatibility: supports electrolysis cell types including PEM, SOEC, AEM, AWE, etc.

• Safe inspection of solar installations with high voltage
• Enables high voltage measurement up to CAT Ⅲ 2000 V

Basic accuracy

0.02%

Max. resolution

0.1 µΩ

Max. testing current

1 A

• High-precision handheld resistance meter measuring from 0.1 µΩ to 3.5 MΩ
• Versatile applications: ideal for EV, aircraft, & motor/transformer maintenance with various probe options

Max channels

Up to 12ch in a 4U unit that fits in a 19-inch rack

Up to 120 channels (10 sets of 12 channels)

• For PV inverter production lines
• Efficiency measurement of multi-MPPT string inverters
• Multi-channel power efficiency measurement

• Wide testing voltage range, up to 5000 V from 250 V DC
• 1000 V AC/ 2000 V DC voltage measurement
• Wireless adapter Z3210 compatible

• Measure insulation of high-voltage equipment (such as transformers, cables, and motors)
• DAR,PI,DD automatically calculated to shorten work time
• IP65 rated all-in-one storage and carrying case

• Built-in PV dedicated function
• Wide testing voltage range, up to 5000 V from 250 V DC
• 1000 V AC/ 2000 V DC voltage measurement
• Wireless adapter Z3210 compatible

• Measure solar PV system insulation resistance safely and accurately while generating
• Measure solar PV system VOC safely and accurately up to 2000 VDC
• Measure insulation of high-voltage equipment (such as transformers, cables, and motors)
• DAR,PI,DD automatically calculated to shorten work time