Measures high voltages by attenuating the voltage to a lower level
The 9665 is 10:1 attenuation probes used to measure high voltage with Hioki Memory HiCorders.
- Attenuates the input voltage to 1/10
- Input capacitance to the probe can be lowered to reduce the load effect
Model No. (Order Code)
|9665||For the Memory HiCorder series|
Note: This probe does not expand the maximum rated voltage above ground of an isolated input. *Please check for Memory HiCorder compatibility by referring to the recorder's product catalog.
|Division ratio||10 : 1 ±1% (at 100 V DC)
(use with a device having a 1 MΩ input resistance)
|Maximum input voltage||1 kV rms (500 kHz or less)|
|Max. rated voltage to earth||1000 V CAT II *
* Maximum rated voltage above ground depends on input unit. This probe does not expand the maximum rated voltage above ground of an isolated input.
|Input Impedance||10 MΩ|
|Frequency characteristics||DC to 150 MHz|
|Input capacitance||18 pF ±2 pF|
|Compensation capacitance range
|15 to 45 pF|
|Cable length||1.5 m (4.92 ft)|
|Included accessories||Vinyl case ×1|