Evaluation of an A/D Converter → D/A Converter
Check the conversion operation of A/D to D/A
■Highlights
- Use the SS7012 DC Signal Source as an input signal source for the A/D converter
→ D/A converter system is used in an electronic circuit and at the same time as a measuring
instrument to measure output voltage (current). Since generation and measurement are isolated,
there is no interference between input and output.
→ D/A converter system is used in an electronic circuit and at the same time as a measuring
instrument to measure output voltage (current). Since generation and measurement are isolated,
there is no interference between input and output.
- Use the SS7012 DC Signal Source as a source of signals of up to ±25 V and ±25 mA
and at the same time measure the output of up to ±28 V and ±28 mA. The minimum resolution
of generation and measurement is both 100 μV and 1 μA.
and at the same time measure the output of up to ±28 V and ±28 mA. The minimum resolution
of generation and measurement is both 100 μV and 1 μA.
-The SS7012 is powered by batteries (Ni-MH or alkaline) or an AC adapter.
Add an output of the SS7012 DC Signal Source to the A/D converter → D/A converter evaluation
circuit and confirm the return of the designed output (e.g., A-fold output).
PC sample software is available from the HIOKI website.
circuit and confirm the return of the designed output (e.g., A-fold output).
PC sample software is available from the HIOKI website.
