LOGIC PROBE 9327
Detect the Presence of Voltage or Relay Contact Signals with Memory HiCorders at High-speeds
Key Features
- Detect Hi/Lo voltage or relay contact signals
- 4 channels with common ground
- Switch between digital or contact input
- 3 thresholds for digital input (+1.4 V/+2.5 V/+4.0 V)
- Supports pulse widths as narrow as 100 ns using high speed response
- Miniature connector
Model No. (Order Code)
9327 |
---|
Connects to the logic input terminals of Hioki Memory HiCorders. Check the size of the terminal before purchase.
Basic specifications
Note: The unit-side plug is miniature terminal type
Function | Detection of voltage signal or relay contact signal for High/Low state recording | |||||
---|---|---|---|---|---|---|
Input | 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detect open-collector signals) Input resistance: 1 MΩ (with digital input, 0 to +5 V) 500 kΩ or more (with digital input, +5 to +50V) Pull-up resistance: 2 kΩ (contact input: internally pulled up to +5 V) |
|||||
Digital input threshold | 1.4V/ 2.5V/ 4.0V | |||||
Contact input detection resistance | 1.4 V: 1.5 kΩ or higher (open) and 500 Ω or lower (short) 2.5 V: 3.5 kΩ or higher (open) and 1.5 kΩ or lower (short) 4.0 V: 25 kΩ or higher (open) and 8 kΩ or lower (short) |
|||||
Detectable pulse width | 100 ns or longer | |||||
Max. allowable input | 0 to +50V DC (the maximum voltage that can be applied across input pins without damage) | |||||
Dimensions and mass | 62 mm (2.44 in)W × 94 mm (3.70 in)H × 20 mm (0.79 in)D, 150 g (5.3 oz), Main unit cable 1.5 m (4.92 ft), input section cable 300 mm (0.98 ft) | |||||
Included accessories | IC clip leads ×1, Alligator clip leads ×1, Carrying case ×1, Instruction Manual ×1 |