Search Results

• 42 to 1000 A AC range
• Weighing only 100g with thin 16 mm body
• DMM function

• World's most popular ultra-slim clamp meter
• New with wider temperature range

• 10 ch isolated, 10 ms recording
• Measure the heat flow and volume of heat energy

• Measure heat flow, DC voltage/ temperature with thermocouple
• Evaluate material insulation performance
• Analyze the causes of temperature change
• Applications in automotive and construction industries

• 10 Hz to 50 kHz, ±1.5% accuracy
• 600A or 6000A AC rated

• Flexible Rogowski sensor easy routes through confined locations and around thick cables
• Tapered tip designed to feed readily through tangled wires

• DC to 10 kHz, ±1.0% accuracy
• Rated 100 A AC/DC

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ via Display Unit

• DC to 10kHz, ±2.0% accuracy
• Rated 600 A AC/DC

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ

• DC to 10kHz, ±1.5% accuracy
• Rated 2000 A AC/DC

• Observe instantaneous waveforms in laboratories and other temperature-controlled environments
• Ideal for site inspections by pairing with CM7290/CM7291 Display Unit
• Output 4 types of data to loggers or other DAQ

• DC to 5 kHz, ±1.0% accuracy
• Rated 100A AC/DC

• Make measurements over extended periods of time without the need to perform
zero-adjustment
• Ideal for measuring in locations with temperature variations

• DC to 5 kHz, ±2.0% accuracy
• Rated 600A AC/DC

• Make measurements over extended periods of time without the need to perform
zero-adjustment
• Ideal for measuring in locations with temperature variations

• DC to 5 kHz, ±1.5% accuracy
• Rated 2000A AC/DC

• Make measurements over extended periods of time without the need to perform
zero-adjustment
• Ideal for measuring in locations with temperature variations

• Pair with CT7000 series
• DCA, ACA, (DC+AC)A, frequency
• WAVE, RMS, PEAK, Hz output

• Combine with CT7000 series AC/DC current sensors
or output to data acquisition equipment

・0.1 Hz to 20 kHz pulse
・Pattern output
・8 channels

・Pulse output module for Memory HiCorders
・Conduct control simulation testing of control boards on equipment such as engine, airbags, brake systems, and power steering

・10 mHz - 100kHz FG
・Max. 15 V output
・2 channels

・Signal generator module for Memory HiCorders
・Output up to 2 channels of arbitrary waveform for simulation testing

・ 2 ch, High-voltage input
・ Max. 1000 VDC, 700 VAC rms
・ DC to 100 kHz bandwidth

・ High-voltage direct input module for memory recorders
・ Measure the primary and secondary sides of UPS and commercial power supply transformers

• Max. 32ch analog to 64ch logic
• 20M-Sampling/s
• 12-bit/16-bit A/D resolution

• Operation testing and evaluation of inverters and UPS during load fluctuation and switching
• Analyze the relationship between engine control and vibration during vibration testing
• Identify power fluctuations when power supply is cycled

• |Z|, L, C, R testing
• 1MHz to 300MHz
• 0.5ms test speed, ±0.72% accuracy
• Measure LCR and conduct frequency sweeps simultaneously

• For high volume production inspections and research and development
• Comparator and contact check

• |Z|, L, C, R testing
• 100kHz to 300MHz
• 0.5ms test speed, ±0.72% accuracy
• Measure LCR and conduct frequency sweeps simultaneously

• For high volume production of ferrite chip beads and chip inductors
• Comparator and contact check

• 100mV to 1000V DC, 7-1/2 digit resolution
• 20ppm (±0.0020% rdg) accuracy
• DCV and temperature testing

• Super high accuracy ideal for aging tests of lithium-ion batteries
• Contact check maximizes measurement reliability

• 100mV to 1000V DC, 7-1/2 digit resolution
• 9ppm (±0.0009% rdg) accuracy
• DCV and temperature testing

• Super high accuracy ideal for aging tests of lithium-ion batteries
• Contact check maximizes measurement reliability

• 1 or 2 channels for CT6700 and 3270 series
• ±12 V output

• Power supply for wideband current probes for output to Memory HiCorders or oscilloscopes

• Earth resistance measurements for multi-grounded systems
• Leak to load current
• CAT IV 600V, True RMS
• Automatic measurement report function with Android™ connectivity via Bluetooth

• Clamp ground wires with ease without digging or disconnecting cables