Search Results

・ 4 ch instantaneous waveforms
・ DC to 2 MHz bandwidth

Capture instantaneous waveforms across 4 channels DC to 2 MHz bandwidth

・ 3 ch, current measurement
・ DC to 2 MHz bandwidth

3 ch, current measurement DC to 2 MHz bandwidth

・5 kV peak Max. (1 MHz or less)
・Max. rated voltage to earth depends on input unit.

5 kV peak Max. (1 MHz or less) Max. rated voltage to earth depends on input unit.

• 4 arms, max. 67 points/sec.
• 45 μm minimum pad pitch (with CP1075-09)
• 15 μm Minimum pad size (with CP1075-09)

• Vertical double-sided flying probe tester for bare board inspections
• Open via defect detection with low resistance measurement
• Detect pattern shape abnormality and voids with super insulation resistance testing

・ DC voltage / current generation function
・ Resistance (simulated output) generation function
・ 8 channels

・ VIR signal generation unit for the MR8740T
・ Simulate signals of various sensors to inspect ECUs

・ For measurement of minute voltage
・ High Accuracy ± 0.02% and Ultra High Resolution of 6 1/2 Digits
・ 50 times/s sampling

High Accuracy ± 0.02% and Ultra High Resolution of 6 1/2 Digits 50 times/s sampling

• Max. 108ch Analog to Max. 96ch Analog + 48ch Logic
• 20M-Sampling/s

• Test high performance ECU boards
• Multi-point testing of engine, driving, and ride comfort management systems
• Record signals captured by various sensors to identify air flow, throttle, torque, speed, vibration, humidity, etc.

• Third party software
• For detailed analysis of Memory HiCorder data

• Multi-lingual, advanced software for analysis and presentation of Memory HiCorder data

• Pair with a measuring instrument for quick, multi-channel battery testing
• Max 60V DC input
• Max. 72 (4-terminal pair) to 264 (2-wire) channels

• Measure impedance, OCV, internal resistance, and external potential
• Free bundled PC application

• Pair with a measuring instrument for quick, multi-channel battery testing
• Max 60V DC input
• Max. 18 (4-terminal pair) to 66 (2-wire) channels

• Measure impedance, OCV, internal resistance, and external potential
• Free bundled PC application

• Specially designed power source unit for the SM7810
• 32 ch, ±500 V to ±1000 V
• 50 mA per channel output

• Power source for the Hioki SM7810 Super Megohm Meter
• Delivers positive and negative polarities required for MLCC test lines

• AC, 1kHz testing source
• 10V to 1000V DC, ±0.01% accuracy, 10 µV resolution
• 0.1 μΩ to 3000 Ω internal resistance range

• EV and PHEV high voltage battery pack testing on production lines
• Total pack resistance, bus bar resistance
• Built-in spark discharge reduction ideal for HV situations

・ 4 ch
・ DC to 2 MHz bandwidth

4 ch, instantly waveforms DC to 2 MHz bandwidth

・ 2 ch
・ DC to 30 MHz bandwidth

2 ch, instantly waveforms DC to 30 MHz bandwidth

• New thinner jaw gets into even more confined spaces
• 42 to 1000 A AC range
• DMM function

• Popular Hioki ultra-slim clamp meter with True RMS
• Wide temperature range

• Automatically pair with LAN-connected measuring instruments
• Display acquired data graphically in real-time
• Windows compatible

• Free PC software for compatible Hioki measuring instruments

Max channels

32 Analog ch to 128 Logic ch

Max. Sampling rate

200 MS/s (high speed)

Memory capacity

1G-Words

• Test ECUs, inverters and motors
• Measure large currents in fields of solar power, EV/HEV/PHEV development
• Measure inverter and switching power supply signals with direct input

• 2 ch, acceleration, load, pressure or strain
• Strain gauge converter amp

2 ch, acceleration, load, pressure or strain Strain gauge converter amp

• Max. 16ch Analog to 64ch Logic
• 20M-Sampling/s
• 12-bit/16-bit A/D resolution

• Measure minute fluctuations in output from automobile sensors in automobiles and other equipment
• Identify voltage fluctuations in devices such as batteries at high levels of precision and resolution
• Function generator, arbitrary waveform generator, and waveform measurement in a single device

• DIN 5032-7:1985 class B
• 0 to 200 000 lx
• Memory function
• Built-in Bluetooth® wireless technology

• Light meter to evaluate illumination equipment and lighting work
• Measure and record illumination data for building inspections