POWER ANALYZER 3390

Product Video

Key Features

Model No. (Order Code)

Basic specifications

Specifications for the Motor Testing Option

Factory-installed options (0)

Direct Current Input (1)

Up to 200 A (High precision) (0)

Up to 500 A (High precision) (0)

Up to 1000 A (High precision) (0)

ME15W (12-pin) - PL23 (10-pin) conversion (1)

Voltage measurement (2)

Storage media (3)

DC, 0.5 Hz to 150 kHz, 3-phase 4-wire, High Precision Power Analyzer for Motor and Inverter Efficiency Analysis

Discontinued

POWER ANALYZER PW3390

PW3390: D/A output and motor analysis function is specified by the order code.

Overview
Specifications
Options
Downloads
Applications

Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3390 is a high-precision, broad-range power analyzer for measuring electrical power from DC to inverter frequencies, providing four input channels to support single- and three-phase inverter motor system measurements.

Advanced motor analysis functions (measures the electric angle and supports vector control)
High-speed harmonic analysis function (50 ms data refresh rate)
Noise analysis function for inverters (using FFT analysis technology)
Inverter power measurement with the convenience of clamp on sensors
Achieve the same superior accuracy as direct wiring method meters at maximum ±0.16% (when combined with the 9709)
LAN, USB, and CF card - a rich array of interfaces

3390	Discontinued, Main unit, clamp sensor is sold separately

Note: Optional current sensor is necessary to measure current or power parameters.

Accuracy guaranteed: 6 months

Measurement line type	Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire, Voltage 4 channels, Current 4 channels, Isolated between each channel
Measurement items	Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire, Voltage 4 channels, Current 4 channels, Isolated between each channel
	Noise measurement (FFT processing): RMS spectrum of voltage/current Harmonic measurement: RMS value, Content factor, Phase angle, Total distortion, Disequilibrium factor
	Additional functions (With optional 9791 or 9793 installed in the main unit) : Torque, Rotation, Frequency, Slip, or Motor output
Harmonic measurement	Input: 4 ch, Synchronization frequency range: 0.5 Hz to 5 kHz, Number of harmonic orders: Max. 100th order
Noise measurement	Number of channels: 1 ch (select one channel from CH1 to CH4), Maximum analysis frequency: 100 k/ 50 k/ 20 k/ 10 k/ 5 k/ 2 kHz
Measurement range	Voltage range: 15 to 1500 V, 7 ranges Current range: 400 mA to 500 A (depends on current sensor, 20A/ 50A/ 200A/ or 500A rated) Power range: 6.0000 W to 2.2500 MW (depends on combination of voltage and current range) Frequency range: 0.5 Hz to 5 kHz
Basic accuracy	Voltage: ±0.05 % rdg. ±0.05 % f.s. Current: ±0.05 % rdg. ±0.05 % f.s. + current sensor accuracy Active power: ±0.05 % rdg. ±0.05 % f.s. + current sensor accuracy
Synchronization frequency range	0.5 Hz to 5 kHz
Frequency band	DC, 0.5 Hz to 150 kHz
Data update rate	50 ms (For harmonic measurement, depends on the synchronization frequency when less than 45 Hz)
Display refresh rate	200 ms (Independent of internal data update rate; waveform and FFT depend on the screen)
Data save interval	OFF, 50 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes, 15 settings
External interfaces	vLAN, USB (communication/ memory), RS-232C, CF card, Synchronization control
Power supply	LAN, USB (communication/ memory), RS-232C, CF card, Synchronization control
Dimensions and mass	340 mm (13.39 in) W × 170 mm (6.69 in) H × 157 mm (6.18 in) D, 4.8 kg (169.3 oz)
Included accessories	Instruction Manual ×1, Power cord ×1, Measurement Guide ×1, USB cable ×1, Input cord label ×2, D-sub connector × 1 (when 9792 or 9793 is installed)

Accuracy guaranteed: 6 months

*Must specify when ordering

The CT9901 is necessary for connecting the PW9100 (12 pin) to the 3390/3390-10 (10 pin)

CONVERSION CABLE CT9901

ME15W (12 pin) to PL23 (10 pin) connector

*When using the CT6865/CT6846, manual settings are required on the main device.

*When using 12-pin current sensors with the “-05” suffix, the CT9901 is required as a connector adapter.

*When using the 12-pin sensors CT6865-05 and CT6846-05, connection via the CT9901 and manual settings are required on the main device.

CONVERSION CABLE CT9901

ME15W (12 pin) to PL23 (10 pin) connector

GRABBER CLIP L9243

Attaches to the tip of the banana plug cable, Red/Black: 1 each, 185 mm (7.28 in.) length, CAT II 1000 V

VOLTAGE CORD L9438-50

1000 V specifications, Black/ Red, 3 m (9.84 ft) length, Alligator clip ×2

Number of input channels

3 channels, CH A: Torque signal input (DC V / Frequency input), CH B: Rotation signal input (DC V / Pulse input), CH Z: Z-phase signal input (Pulse input)

Measurement item

Voltage, Torque, Rotation, Frequency, Slip, Motor power

DC V (CH A B)

Measurement range: ±1 V/ ±5 V/ ±10 V, Accuracy: ±0.1 % rdg. ±0.1 % f.s.

Frequency (CH A)

Effective amplitude range: ±5 V peak, Measurement band: 1 kHz to 100 kHz

Pulse (CH B)

Detection level: (Low) 0.5 V or less, (High) 2.0 V or more, Measurement band: 1 Hz to 200 kHz

Pulse (CH Z)

Detection level: (Low) 0.5 V or less, (High) 2.0 V or more, Measurement band: 0.1 Hz to 1 kHz

Includes a PC card adapter

PC Card Precaution
Use only PC Cards sold by HIOKI. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards.