Home Products CLAMP ON AC/DC HiTESTER 3284

CLAMP ON AC/DC HiTESTER 3284

20 A/200 A AC/DC Clamp Meters with Analog Output and Peak Hold for Inrush Measurement Applications

Discontinued

No analog input: CM4371-50
With analog input: CM7290+CT7636

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3284 is an AC/DC current and voltage clamp meter with analog output capabilities and a peak hold function.

Key Features

  • Analog output for current measuring level, current measuring waveform, or frequency measuring level.
  • Peak hold function displays the crest value of the inrush current occurring when electrical equipment starts
  • AC+DC mode enables measurement of the RMS value of full- or half-wave rectified waveforms

Model No. (Order Code)

3284 With monitor/analog output

Basic specifications

Accuracy guaranteed: 1 year
DC Current range 20.00/ 200.0 A, Basic accuracy: ±1.3 % rdg. ±3 dgt.
AC Current range 20.00/ 200.0 A (10 Hz to 2 kHz, True RMS),
Basic accuracy 45-66 Hz: ±1.3 % rdg. ±3 dgt.
DC Voltage range 30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage range 30.00 V to 600 V, 3 ranges (10 to 1 kHz, True RMS),
Basic accuracy 45-66 Hz: ±1.0 % rdg. ±3 dgt.
Crest factor 2.5 or less (1.5 at 200 A, 1.7 at 600 V)
Monitor, Analog output DC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz bandwidth (±3dB)
Resistance, Continuity check N/A
Frequency range 1.00 Hz to 1000 Hz, Basic accuracy: ±0.3 % rdg. ±1 dgt.
Other functions AC+DC mode, Maximum/ Minimum/ Average value record function, Data hold, Peak hold, Auto power off, Auto zero
Display Display refresh rate: 4 times/s (FAST), 1 time/3s (SLOW), 4 times/s (bar graph)
Power supply 6F22 (Stacked manganese battery) ×1, Continuous use: 25 hours, or AC adapter 9445-02/-03
Core jaw dia. φ 33 mm (1.30 in)
Dimensions and mass 62 mm (2.44 in) W × 230 mm (9.06 in) H × 39 mm (1.54 in) D, 460 g (16.2 oz)
Included accessories Test Lead L9207-10 ×1, Carrying Case 9399 ×1, Hand strap ×1, 6F22 (Stacked manganese battery) ×1, Instruction manual ×1

Included accessories (1)

TEST LEAD L9207-10

Cable length: 90 cm (2.95 ft.)

Options (3)

OUTPUT CORD L9095

Connect to BNC terminal, 1.5 m (4.92 ft) length

OUTPUT CORD L9096

Connect to terminal block, 1.5 m (4.92 ft) length

AC ADAPTER 9445-02

For USA, 100 to 240 V AC, 9 V/ 1 A

  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.

User Support