MEMORY HiCORDER 8860, 8861
High-speed 16- or 32-channel Memory Recorders Offer Data Acquisition, Oscilloscope and Data Logger Functionality to Record Waveforms in Any Situation
Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, vibration, weight, acceleration and rotation due to complete isolation between channels and from each channel to the ground. More than just a digital oscilloscope, the 8860-50 and 8861-50 memory recorders accommodate plug-and-play input modules to meet applications such as monitoring commercial power supplies, fault analysis of electrical equipment, evaluating electric vehicle chargers, and analyzing conveyor belt speeds.
Key Features
- Built-in 80GB hard drive (no PC card slot)
- A faster CPU greatly enhances instrument operability and response.
- Multi-channel logging on up to 64 or 128 channels (Use with the 8958)
- 20 MS/s high-speed sampling (Use with the 8956)
- Various interfaces built-in: LAN/USB/Hard disk drive
- Supports the new high-voltage input module for measuring high voltage directly
Model No. (Order Code)
8860-50 | Discontinued, Main unit only, input modules up to 4 units |
---|---|
8860-51 | Discontinued, PC card slot less, built in HD unit |
8861-50 | Discontinued, Main unit only, input modules up to 8 units |
8861-51 | Discontinued, PC card slot less, built in HD unit |
Basic specifications
8860-51 | 8861-51 | |||||
Number of input units | Max. 4 units | Max. 8 units | ||||
Number of channels | Max. 16 analog channels (Max. 64 channels when using the 8958) + standard 16 logic channels | Max. 32 analog channels (Max. 128 channels when using the 8958) + standard 16 logic channels | ||||
Measurement ranges (20 div full-scale) | 5 mV to 20 V/div, 12 ranges (when using the 8956), Resolution : 1/100 of range | 5 mV to 20 V/div, 12 ranges (when using the 8956), Resolution : 1/100 of range | ||||
Max. allowable input | DC 400V (when using the 8956) | DC 400V (when using the 8956) | ||||
Frequency characteristics | DC to 10 MHz (-3dB, when using the 8956) | DC to 10 MHz (-3dB, when using the 8956) | ||||
Time axis at memory function | 5 µs to 5 min/div, 26 ranges, sampling period : 1/100 of range, external sampling, dual timebase possible | |||||
Measurement functions |
MEM (high-speed recording) REC (real-time recording) REC & MEM (realtime recording + high-speed recording) FFT (frequency analysis) Real-time Save (records directly to storage media) | |||||
Storage memory capacity | 12-bits × 32M-words/ch (1ch at 8860-51, 2ch at 8861-51) to 2M-words/ch (16ch at 8860-51, 32ch at 8861-51) *Memory capacity can be expanded 32 times. (Optional memory board) |
|||||
Removable storage | USB 2.0 memory ×3, Hard disk drive (80 GB, built in the main unit) ×1 (No PC card slot) | |||||
Recording paper | [Built in optional printer unit] A4: 216 mm (8.50 in) × 30 m (98.43 ft), or A6: 112 mm (4.41 in) × 18 m (59.06 ft) selectable, thermal paper roll, Recording speed : Max. 25 mm (0.98 in)/sec | |||||
Display | 10.4-inch SVGA-TFT color LCD (800 × 600 dots) | |||||
External interfaces | USB 2.0, LAN, Monitor output (15 pin D-sub output), *GP-IB is Not Available | |||||
Power supply | 100 to 240 V AC (50/60 Hz) (220 VA max. printer not used) 12 V DC (use the DC power unit 9684 : option, factory installation only) |
100 to 240 V AC (50/60 Hz) (280 VA max. printer not used) 12 V DC (use the DC power unit 9684 : option, factory installation only) |
||||
Dimensions and mass | 330 mm (12.99 in) W × 250 mm (9.84 in) H × 184.5 mm (7.26 in) D, 8 kg (282.2 oz) (printer not installed) | 330 mm (12.99 in) W × 250 mm (9.84 in) H × 284.5 mm (11.20 in) D, 10.5 kg (370.4 oz) (printer not installed) | ||||
Included accessories | Quick Start Manual × 1, Input Module Guide × 1, Instruction Manual × 1, Analysis and Communication Supplement × 1, Application Disk (WaveViewer Wv, communication commands table) × 1, Power cord × 1, Input cord label × 1, Ferrite clamp (for LAN cable) × 1 |
LabVIEW and MATLAB support
Compatible models | LabVIEW | MATLAB script | ||||
---|---|---|---|---|---|---|
8860-50 | Available | Available | ||||
8861-50 | Available | Available |
Printer options (2)
Roll type A4 width 216 mm (8.50 in) × 30 m (98.43 ft), 6 rolls/set
Roll type A6 width 112 mm (4.41 in) × 18 m (59.06 ft), 10 rolls/set
Factory-installed options (A) (1)
*Must specify when ordering
Note: Choose one memory board for Model 8860-51, and two of the same capacity for the 8861-51, 80-GB HD drive is factory pre-installation.
Built in type, 80 GB
Factory options (B) (0)
*Must specify when ordering
* Only one of either the DC Power Unit 9684 or Probe Power Unit 9687 can be installed at any one time. Please contact your Hioki representative if concurrent installation is required.
Factory options (C) (0)
*Must specify when ordering
* Either the DC power unit 9684 or the probe power unit 9687 may be used. If you want to use both at the same time, consult us.
Input modules (1)
*Input cords are not included. Please purchase them separately. Install by inserting into the main unit. Can be replaced by user.
Input cable (A) (4)
*Voltage is limited to the specifications of the input modules in use
• Flexible φ 4.1 mm (0.16 in) thin dia.
• Cable allowing for up to 600 V input
• 1.8 m (5.91 ft) length
Red/black set attaches to the ends of the Connection Cord L9790
Red/black set attaches to the ends of the Connection Cord L9790
Red/black set attaches to the ends of the Connection Cord L9790
Input cable (B) (3)
*Voltage is limited to the specifications of the input modules in use
•φ 5.0 mm (0.20 in) dia
•Cable allows for up to 600 V input
•1.8 m (5.91 ft) length
•Includes detachable large alligator clips
•φ 5.0 mm (0.20 in) dia.
•Cable allows for up to 300 V input
•1.7 m (5.58 ft) length
•Small alligator clip
Attaches to the tip of the banana plug cable, Red/Black: 1 each, 185 mm (7.28 in.) length, CAT II 1000 V
Input cord (C) (1)
*Voltage is limited to the specifications of the input modules in use
Input cable (D) (2)
*Voltage to ground is within this product's specifications. Separate power source is also required.
Custom cable (0)
*For P9000. Inquire with your Hioki distributor.
(1) Bus powered USB cable
(2) USB(A)- Micro B cable
(3) 3-prong cable
Input cable (E) (3)
*Voltage to ground is within this product's specifications.
*For powering the 9322, AC Adapter 9418-15 or the 9687/9248 are required separately.
Power supply to the 9322 through this cord from the Probe power unit Z5021/9687, 70 cm (2.30 ft) length
100 to 240V AC
Non-contact Voltage measuring (0)
Other options for Input (3)
Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length
Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length
Receiving side banana (female), output BNC (male)
Temperature sensor (0)
*For reference only. Please purchase locally.
Thermocouple
Logic signal measurement (3)
* Only the small terminal types can be used.
* The 9323 is not required for the small-terminal types 9327, 9320-01, 9321-01 and MR9321-01.
Up to 200 A (High precision) (2)
Up to 1000 A (High precision) (0)
Power supply (1)
Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length
Current sensors for the F/V Unit 8940 (4)
*To connect the current sensor via the conversion cable for the F/V Unit 8940, or using with the Power supply unit 9555-10.
*The 3274/3275/3276 cannot be used for the F/V Unit 8940.
To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length
To connect the 3273-50 and the 8940, Note: cannot be used with the 3274, 3275, 3276 to connect the 8940 via this cable 9319
10 mA class to 500 A (High speed) (4)
Power supply (2)
100 A to 2000 A (Medium speed) A (7)
100 A to 2000 A (Medium speed) B (0)
500 A to 5000 A (3)
*For commercial power lines, 50/60 Hz
Leak Current (2)
*For commercial power lines, 50/60 Hz
Receiving side banana (female), output BNC (male)
For USA, 100 to 240 V AC, 9 V/ 1 A
Up to 2000 A (Curent meter) (0)
*Clamp sensor sold separately
PC Software (2)
* The 9335 supports 8860-50/8860, 8861-50/8861 series MEM, REC and REC&MEM data recorded using single-axis sampling only.
Straight Ethernet cable, supplied with straight-to-cross conversion adapter, 5 m (16.4 ft.)