AC/DC CURRENT PROBE CT6830

Insulated conductor

Hioki precision current clamps enable accurate, non-intrusive AC and DC current measurement without interrupting the circuit.
Precision current clamps are used where accuracy, ease of use, and minimal impact on the test setup are essential, including vehicle on-board measurements (incl. WLTP), power electronics testing, efficiency analysis, and measurements in hard-to-access environments.

Key Features

Exceptional performance in a compact package
Easy to install in confined locations with complex wiring
Rated current: 2 A AC/DC
Guaranteed combined accuracy when used with Hioki Power Analyzers

Model No. (Order Code)

CT6830	2 A AC/DC, φ 5 mm

Note: CT6800 series cannot be used alone.

Compact, non-contact, and high-accuracy

Multiple sensors can be easily installed, even in confined spaces and locations with complex wiring.
Compact sensor makes possible high-performance, high-accuracy measurement.

Broad operating temperature range

Operating temperature range: -40°C to 85°C
Low-level DC current can be measured with a high degree of accuracy, even in environments where the ambient temperature varies.

External Power Units (Compatible with Various Measurement Instruments)

These external power units supply power to current sensors and enable connection to a wide range of measurement instruments, including power analyzers, recorders, and oscilloscopes*.
Single-channel and four-channel models are available to support different measurement setups.

*Connect to instruments with an input impedance of 1 MΩ or higher.

Basic specifications

Accuracy guaranteed: 1 year

Rated measurement current	2 A AC/DC
Max. allowable input	3 A rms continuous (±4.3 Ap)
Bandwidth	DC to 100 kHz
Basic accuracy	DC± 0.3％ rdg. ±0.1％ f.s.
Core diameter	φ 5 mm (0.20 in.) or less
Output connectors	HIOKI ME15W
Operating temperature range	Sensor: -40°C to 85°C (-40°F to 185°F), 80% RH or less (non-condensing) Relay box: -25°C to 50°C (-13°F to 122°F), 80% RH or less (non-condensing)
Dimensions	Sensor: 76.5W × 23.4H ×14.2D mm (approx. 3.00W × 0.92H × 0.56D in.) (excluding protrusions and the cable) Relay box: 80W × 20H × 26.5D mm (approx. 3.15W × 0.79H × 1.04D in.) (excluding protrusions and the cable)
Weight	160 g (5.64 oz.)
Output cable length	4 m (13.12 ft.) (between sensor and relay box), 0.2 m (0.66 ft.) (between relay box and output connector)
Included accessories	Colored labels (for channel identification), Carrying case, Instruction Manual, Operating Precautions