CLAMP ON SENSOR 9669

Hioki current sensors are best-in-class devices for use with power meters and PQAs. The 9669 is a 1000A AC clamp sensor with voltage output for measuring load current.

CAT III 600V

Key Features

For inverter devices or commercial power lines
Measure up to 1000 A

Model No. (Order Code)

9669	For the PW3360/65, PW3198/3197, LR8513 and similar products

Note: Supports power quality analyzers, power meters and other data acquisition equipment with voltage input

Basic specifications

Accuracy guaranteed: 1 year

Rated measurement current	1000 A AC
Max. measurement current	Continuous 1000 A (45 to 66 Hz)
Output rate	0.5 mV AC/ A
Amplitude accuracy (45 to 66 Hz)	±1.0% rdg. ±0.01% f.s.
Phase accuracy	±1° (45 Hz to 5 kHz)
Amplitude frequency characteristics	Within ±2% at 40 Hz - 5 kHz (deviation from accuracy)
Max. rated voltage to earth	600 V AC rms or less
Measurable conductor diameter	φ 55 mm (2.17 in) or less 80 × 20 mm, Buss bars
Operating temperature and humidity	0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
Dustproofness and waterproofness	N/A
Dimensions and mass	99.5 mm (3.92 in)W × 188 mm (7.40 in)H × 42 mm (1.65 in)D, 590 g (20.8 oz) Cord length 3 m (9.84 ft), Output terminal: BNC