POWER HiTESTER 3193-10

Wide Bandwidth
Wide Spectrum 6ch Power Meter for Comprehensive Device Assessment

Discontinued

POWER ANALYZER PW6001

Overview
Specifications
Options
Downloads

Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3193-10 is a 6-channel power meter for testing any type of circuit ranging from single-phase lines to three-phase four-wire lines. Based on the voltage, current, and active power measurements, the power meter calculates and displays reactive power, apparent power, power factor, phase angle, and efficiency. It also provides a wide range of measurement functions including frequency measurement function, peak measurement function, current integration, active power integration, analog outputs, monitor outputs.

Key Features

A rich assortment of measurement functions including voltage, current, power, waveform peak value and efficiency
High-precision with basic accuracy of ±0.1%, high-speed response of 0.1 s
Measure up to six circuits simultaneously
Select from 3 types of input units
Measure the input and output of a 3-phase inverter using all 6 channels

Model No. (Order Code)

3193-10	Discontinued, Main unit only, no FDD

Note: Main unit 3193-10 cannot operate alone - please purchase an input unit Model 9600 to 9605 for factory installation prior to shipment. All subsequent input unit replacements or expansions must be conducted at HIOKI for an additional service charge. Voltage input code is not included in the input unit of 9600 to 9602. Clip type lead etc. Please consult as necessary.

Basic specifications

Accuracy guaranteed: 6 months

Measurement lines	Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems
Measurement items	[Using the optional 9600, 9601, 9602] Voltage, current, voltage/current peak, active power, reactive power, apparent power, power factor, phase angle, frequency, current integration, power integration, load rate, efficiency
	[Using the optional 9603, added function] Voltage, torque, rotation, frequency, motor output
	[Using the optional 9605, added function] Harmonic measurement, waveform, voltage fluctuation / flicker measurement function
Measurement range (using the 9600)	[Voltage] 6/ 15/ 30/ 60/ 150/ 300/ 600/ 1000 V [Current] 200/ 500 mA, 1/ 2/ 5/ 10/ 20/ 50 A [Power] 1.2 W to 150 kW (Depends on measurement mode and combination of voltage and current range) [Frequency] 50/ 500/ 5 k/ 50 k/ 2 MHz
Basic accuracy (Active power)	±0.1 % rdg. ±0.1 % f.s. (45 Hz to 66 Hz, using the 9600)
Display refresh rate	8 times /s
Frequency characteristics	[Using the 9600] DC, 0.5 Hz to 1 MHz [Using the 9601] 5 Hz to 100 kHz [Using the 9602] DC, 0.5 Hz to 200 kHz
Functions	Waveform peak measurement, Efficiency measurement, D/A output, External control, Scaling, Averaging, Back up function, PM measurement at motor output (using the optional 9603), etc,.
Interfaces	RS-232C, GP-IB standard
Power supply	100/ 120/ 200/ 230 V AC, switched automatically, 50/60 Hz, 150 VA max.
Dimensions and mass	430 mm (16.93 in) W × 150 mm (5.91 in) H × 370 mm (14.57 in) D, 15 kg (529.1 oz) (at options installed)
Included accessories	Instruction manual ×1, Power cord ×1, Connector ×1

Factory-installed options (0)

* Input modules are factory-installed options, must specify when ordering

* Use the same input unit for a particular measurement line.
* When selecting the 9602 Input Unit, be sure to also purchase the appropriate clamp sensor.

Up to 200 A (High precision) (0)

* Model CT6863 is recognized as the UNIVERSAL CLAMP ON CT Model 9278 by Model 3193/ 3193-10/ 3194, but operability is supported.

* In order to use AC/DC CURRENT SENSOR Model CT6862 with Model 3193/ 3194, a firmware upgrade of Model 3193/ 3194 is required.