Home Products PHASE DETECTOR 3129

PHASE DETECTOR 3129

Non-Metallic Contact 70 V to 600 V Phase Detector

Discontinued

CAT III 600 V

Key Features

  • Magnetic base allows the instrument to be secured on a distribution panel
  • Simply clip clamps onto wire insulation
  • Rotating LED indicator indicates the phase sequence for a 3-phase power supply at a glance
  • Intermittent beeps signal positive phase; continuous tone signals reverse phase

Model No. (Order Code)

3129 Discontinued
Compatible wires: IV cable: Up to 100 mm^2

Basic specifications

Functions Phase detection (positive and negative)
Voltage detection method Static induction
Voltage range 70 to 600 V AC (50/60 Hz) (sine wave,continuous input)
Frequency range 45 Hz to 66 Hz
Object to be connected 2.4 mm (0.09 in) to 17 mm (0.67 in) of insulated wiring
IV, HIV cable: 2 to 100 mm^2
CV cable: 2 to 60 mm^2
Display Phase detection :Positive ; 4 LEDs lit in clockwise order and the buzzer sounds intermittently
Negative ; 4 LEDs lit in counterclockwise order and the buzzer sounds continuously
Battery check function Power ON lamp: lights up (Power ON), blinks (Battery LOW)
Auto power off Auto shut off if no activity is detected after power is turned ON for 15 minutes
Power supply R6P (AA) manganese battery ×2, Continuous use: 70 hr
Dimensions and mass 70 mm (2.76 in) W × 75 mm (2.95 in) H × 30 mm (1.18 in) D, 200 g (7.1 oz), Cord length : 0.7 m (2.30 ft)
Included accessories Carrying case ×1, Strap ×1, Spiral tube ×1, Instruction manual ×1, R6P (AA) manganese battery ×2
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.

User Support