Home Products BATTERY HiTESTER 3555

BATTERY HiTESTER 3555

Portable Battery Tester for Testing Compact Storage Batteries for Mobile Devices

Discontinued

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The 3551 is a 300 mΩ to 30 Ω/30V portable battery internal resistance tester suitable for testing high-capacity alkali and lead-acid storage batteries used in mobile devices.

Key Features

  • For use with compact batteries such as NiCad and nickel-metal hydride
  • Instantaneously diagnose degradation (PASS, CAUTION, FAIL) by measuring internal resistance and voltage (*1)
  • *1:Operator must input the criteria for PASS/FAIL judgments according to the type of battery being measured.

Model No. (Order Code)

3555 Discontinued
Note: The 3555 is unable to make PASS/FAIL judgments for lithium-ion batteries due to the extremely small magnitude of the changes in their internal resistance. For applications involving measurement of batteries with low internal resistance, for example lead acid batteries, use the Battery Tester BT3554-50.

Basic specifications

Accuracy guaranteed: 1 year
Resistance measurement range 300 mΩ (max. display 300.00 mΩ, resolution 100 μΩ) to 30 Ω (max. display 30.00 Ω, resolution 10 mΩ), 3 ranges
Accuracy: ±1.2 % rdg. ±6 dgt. (All ranges)
Testing source frequency: 1 kHz ±5 Hz, testing current: 5 mA (300 mΩ range), 500 μA (3 Ω range), 50 μA (30 Ω range)
Open-circut Voltage: 5 V peak
Voltage measurement range ± 3 V (max. display ±3.000 V, resolution: 1 mV) to ± 30 V (max. display ±30.00 V, resolution: 10 mV), 2 ranges
Accuracy: ±0.15 % rdg. ±6 dgt.
Absolute max. input voltage 50 V DC max. (No AC input)
Sampling rate 1.25 times/s (at resistance and voltage measurement combination)
Comparator functions Setting: Upper and lower limit for resistance, and lower limit for voltage, Number of comparator setting: 10 sets
Comparator output: Pass (green), Warning (amber), and Fail (red) LEDs, Audible output on warning or Fail
Other Data storage: N/A, Interface: N/A, Temperature measurement: N/A
Power supply LR6 (AA) Alkaline dry battery × 6, Continuous operating time: 18 h
Dimensions and mass 196 mm (7.72 in) W × 130 mm (5.12 in) H × 50 mm (1.97 in) D, 680 g (24.0 oz) (including batteries)
Included accessories Pin Type Lead 9461 × 1, Instruction manual × 1, LR6 (AA) alkaline battery × 6

Measurement Leads (4)

*The L2107 cannot use with Model 3555

About probe length A: From junction to probe B: Probe part L: Whole length

CLIP TYPE LEAD 9452

A:220 mm (8.66 in), B:197 mm (7.76 in), L:1360 mm (4.46 ft)

FOUR TERMINAL LEAD 9453

A: 280 mm (11.02 in.), B: 118 mm (4.65 in.), L: 1360 mm (4.46 ft.), 60 V DC

ZERO ADJUSTMENT BOARD 9454

For the L2100, 9461, 9465, 9465-10, 9772

PIN TYPE LEAD 9461

A:240 mm (9.45 in), B:132 mm (5.20 in), L:804 mm (2.64 ft)

Primarily for use with compact secondary batteries, etc. (2)

(for terminals with very little surface area)

About probe length A: From junction to probe B: Probe part L: Whole length

PIN TYPE LEAD 9770

A: 260 mm (10.24 in.), B: 140 mm (5.51 in.), L: 850 mm (2.79 ft.), 60 V DC

PIN TYPE LEAD 9771

A: 260 mm (10.24 in.), B: 138 mm (5.43 in.), L: 850 mm (2.79 ft.), 60 V DC

  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.

User Support