SENSOR UNIT CT9557

Hioki pass-through current sensors and clamp on current probes are best-in-class current sensing devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT9557 is 4-channel sensor unit and power adapter for any of the CT686x series, 9709 and CT684x series current sensors and probes that provides waveform and RMS output.

Key Features

Power supply for high-precision current sensors with waveform output functionality
Output a single waveform from an aggregate of input waveforms

Model No. (Order Code)

CT9557	For the CT6841-05, etc., ME15W connector

Measure large currents and multi-cable circuits with aggregate functionality

Once a current sensor has been attached to each branch cable, the CT9557 adds the sensor signals together to create a total signal. Since the sensor unit can treat multiple sensors as a single sensor, the current can be measured using a single power meter.

Basic specifications

Accuracy guaranteed: 1 year

Connectable current sensors	Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a current sensor equipped with a PL23 (10-pin) terminal
Output Terminal	BNC Terminal
Output voltage	Waveform output/ Total waveform output: 2 V f.s. Total RMS output: 2 V DC f.s.
Output resistance	50 Ω
Operating temperature range	-10 °C to 50 °C (14 °F to 122 °F)
Power supply	AC Adapter Z1002 (100 to 240 V AC, 50/60 Hz, maximum rated power when used with sensors: 155 VA) External power supply (10 to 30 V DC; maximum rated power: 60 VA)
Dimensions and mass	116 mm (4.57 in)W × 67 mm (2.64 in)H × 132 mm (5.20 in)D (excluding protruding parts),420 g (14.8 oz)
Included accessories	AC Adapter Z1002 ×1, Power cord ×1, Instruction manual ×1