SA2633 MEASUREMENT SOFTWARE

V1.00 Jun 01, 2022

The copyright to the executable program file and associated documents is owned by HIOKI E.E. CORPORATION. This utility may not be bundled with software or other publications which are sold for profit without the express written permission of the copyright owner.
Further, this product may not be modified without the express written permission of the copyright owner.

HIOKI disclaims any and all responsibility for any consequences arising out of use of this software.

Software (setup_SA2633 MEASUREMENT SOFTWARE_V1.00.0.0.zip)

○ Latest software is posted. Keep the instruction manual up-to-date.
○ Do not perform the following operations during the upgrade. Repair is required.
・ Turn off the main unit.
・ Remove the media.

About SA2633 MEASUREMENT SOFTWARE

The SA2633 Measurement Software is used to acquire data for SA2632 Analytical Software.
Using the IM3536(-01) LCR Meter and SA2633 Measurement Software together allows you to easily acquire data for slurry analysis.
 

Specifications

* Instrument to be controlled
 - IM3536 LCR Meter
 - IM3536-01 LCR Meter

* Supported interfaces
 - RS-232C
 - USB (virtual COM)
 - LAN (socket communication)

* Compensation function
 - Performs open compensation and short compensation for the instrument to be controlled from the software.

* Measurement start and stop
 - Performs frequency sweep measurement of the instrument to be controlled under the fixed conditions from the software,
   and saves the measurement results.

* Measurement data save function
 - Outputs the measured impedance data in the file format that can be loaded using the SA2632 Analytical Software.

* Measurement time
 - Approx. 1 minute

* System requirements
 - Memory: 512 MB or more
 - Hard disk: 1 GB or more of available space
 - Display: 1,024 × 768 dots or more, 65,536 colors or more
 - Interface: USB 2.0 or more to be installed
 - OS: Windows 8.1 (32-bit/64-bit), Windows 10 (32-bit/64-bit), Windows 11 (64-bit)
 - .NET Framework: 4.7.2

Version Upgrade History

V1.00 (June 2022)
 - First release

Operating Environment

- Memory: 512 MB or more
- Hard disk: 1 GB or more of available space
- Display: 1,024 × 768 dots or more, 65,536 colors or more
- Interface: USB 2.0 or more to be installed
- OS: Windows 8.1 (32-bit/64-bit), Windows 10 (32-bit/64-bit), Windows 11 (64-bit)
- .NET Framework: 4.7.2

Precautions

- When using USB, it is necessary to install a device driver. For details, please refer to the instruction manual of each product.
- To use the latest version of the check function, an Internet connection is required.