Home Products BARE BOARD TESTER FA1232-61

BARE BOARD TESTER FA1232-61

Robust Support for Testing Device Embedded Substrates

Discontinued

The FA1232 is a bare board tester that utilizes the full range of Hioki’s in-circuit testing technologies to deliver extensive range of tests, from high-density FC-CSP boards with active and passive embedded devices.

Key Features

  • Support for an extensive range of tests, from high-density FC-CSP boards to device embedded
  • Multichannel test point configuration with 8192 channels each for the upper and lower fixtures
  • Test performance that is fast, highly precise, and highly reliable (*1)
  • Jig replacement with the touch of a button
  • Additional convenience with genuine Hioki fixtures thanks to the RFID function
  • *1:High-speed measurement with parallel measurement. High-speed movement due to a combination of a lightweight unit and test head.

Model No. (Order Code)

FA1232-61 Discontinued

Specifications Overview

Maximum number of test points 16,384 (8,192 top, 8,192 bottom)
Maximum number of test steps 10,000 steps
Minimum pad diameter φ 20 μm
Supported range of board sizes for clamping and transport Thickness: 0.1 to 2.5 mm (0.10 in) ; Dimensions: 45 mm (1.77 in)W × 50 mm (1.97 in)D to 50 mm (1.97 in) × 305 mm (12.01 in)D
Thickness: 0.3 mm (0.01 in) to 2.5 mm (0.10 in) ; Dimensions: 45 mm (1.77 in)W × 50 mm (1.97 in)D to 170 mm (6.69 in)W × 305 mm (12.01 in)D
Measurement units High-speed measurement unit
Power supply 200/220 V AC (3-phase, 3-wire), 50/60 Hz depending on location of use (please specify upon order)
Power consumption: 5.2 kVA
Dimensions and mass 1,795 mm (70.67 in)W × 1,740 mm (68.50 in)H × 2,300 mm (2300 in)D, 2,500 kg (88 183.4 oz)

Handling System FA1882-60 Specifications

Power supply 200/220 V AC (3-phase, 3-wire), 50/60 Hz depending on location of use (please specify upon order)
Power consumption: 2.0 kVA
Board storage Stacked in stockers (untested, PASS, FAIL)
4 categories (untested, PASS, OPEN/UNTESTED = FAIL 1, SHORT/SHORT+OPEN = FAIL 2)
Cycle time Approx. 8.5 sec.
Board dimensions Thickness: 0.3 mm (0.01 in) to 2.5 mm (0.10 in)
Dimensions: 45mm (1.7 in) × 50 mm (1.97 in) to 170 mm (6.69 in)× 305 mm (12.01 in)
Dimensions and mass 1,950 mm (76.77 in)W × 1,685 mm (65.79 in)H × 1,150 mm (45.28 in)D (excluding handles and other protruding parts), 800 kg (28 218.7 oz)
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.
  • No results were found.

User Support