Non-contact Voltage Probe, Non-contact CAN Sensors

NON-CONTACT AC VOLTAGE PROBE SP3000

NON-CONTACT CAN SENSOR SP7001, SP7002

Sample program for communication with HIOKI products

Simultaneous Data Acquisition of CAN and Drive Video

Capture CAN FD & CAN Data on Public Roads

Connectable Products of the Non-Contact CAN Sensor SP7001/SP7002

Difference between the Non-Contact CAN Sensor SP7001 and SP7002

Second hand instruments

A comment from the Good Design Award 2017

[Head of probe] AC VOLTAGE PROBE SP9001

[Main body measuring circuit] NON-CONTACT AC VOLTAGE PROBE SP3000

Also sold separately (0)

Options (3)

Key Features

Ideal for applications where:

New approach means dramatically fewer man-hours

Easy setup

Undamaged wires for easy and safe, one-handed measurement

Continue using your existing CAN analysis system

Wide -40°C to 85°C operating temperature

Connect probes without worrying about CAN bus polarity

Adjustable sensitivity accommodates a variety of conditions

Designed not to trigger ECU security lock-outs

Vibration resistance designed for on-road testing

Noise immunity robust enough for use with EVs and HVs

Carry out testing on public roads with peace of mind since no vehicle modifications are needed

Acquire CAN signals with the same accuracy as the contact method

Non-contact method also excels with CAN FD high-speed signals

Reliably capture even infrequent events

Acquire signals without needing to go through a central gateway

Ideal for all development processes ranging from unit to vehicle testing

Analysis of vehicles that have more electrical equipment and data

Acquire CAN signals used in a broad range of industries

Product configuration

Basic specifications

Sensor (2)

Signal probe (2)

CAN Interface (2)

Power supply (4)

Cable (1)

Case (1)

Observing (3)

Vehicle CAN Bus Monitoring is Easier than Ever

Actual measurement example using NON-CONTACT CAN SENSOR

Key Features

Specification

Programming language

Communication Interfaces

Version Upgrade History

Points

Collect CAN data of actual driving for building and testing autonomous driving systems

Acquire CAN data immediately whenever you want

hiokicmsadmin — Wed, 01 Mar 2017 13:16:54 +0000

NON-CONTACT AC VOLTAGE PROBE SP3000 hiokivendor001 Memory Recorder Options Non-contact Voltage Probe, Non-contact CAN Sensors

NON-CONTACT AC VOLTAGE PROBE Capture Voltage Signals from Outside the Wire Cover The SP3000 is a non-contact AC voltage waveform probe ideal for maintenance applications involving device control signals and sensor signals. Simply apply the probe to a cable outside its insulation cover to capture the signal without exposing the technician to electrocution.

Discontinued / 廃止 • Supports φ1mm to 2.5mm covered wires
• 10Hz to 100kHz frequency bandwidth
• 5Vrms 14Vp-p rated measurement voltage • Capture voltage signals from outside the wire cover Connect to a Memory HiCorder’s analog input terminal or oscilloscope. Both the SP3000 amplifier box and SP9001 probe head are necessary to measure. Select Model SP3000-01 for the entire system.

“First, this award recognizes Hioki’s proprietary no-metal-contact measurement technology, which allows measurement of voltage waveforms from outside a wire’s insulation, without any need to make contact with a metal terminal. Further, it recognizes the product’s technology and design, for example in terms of the implementation of that technology in an instrument that can be applied to wires single-handedly in confined locations and designers’ success in creating a small, hands-free probe that need not be supported by the end-user.”

Accuracy guaranteed: 1 year

Rated measurement voltage	5 V rms (14.14 Vp-p)
Output rate	1 V/V
Rising time	4.5 μs or less
Frequency band	10 Hz to 100 kHz (-3 dB)
Voltage measurement precision	±2.5% rdg. ±1% f.s. (0.5 Vrms to 5 Vrms)
Effects of wire under measurement	±5% rdg. (Finished outer diameter φ1.0 to 2.5 mm, in a wire rod in conformity with UL1007, UL1015, AV, AVS, AVSS)
Power supply	(1)USB bus power: USB mini receptacle: 5 V ±0.25 V DC (2)AC Adapter Z1013: 5 V DC, 2.6 A Rated supply voltage: 100 V to 240 V AC (50 Hz/60 Hz)
Output terminal	Insulated BNC (Measuring device connection side), Output resistance : 50 Ω
Dimensions and mass	120 mm (4.72 in) W × 25 mm (0.98 in) H × 55 mm (2.16 in) D, 160 g (5.64 oz) (including cable)
Included accessories	Ground connection cable (1.5 m) ×1, Alligator clip ×1, USB cable ×1, Instruction manual ×1

9804-02 can be used by being attached to the tip of the GND connection cable included in SP3000

MAGNETIC ADAPTER 9804-02

Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)

AC ADAPTER Z1013

100 V to 240 V AC

CARRYING CASE C1011

Includes compartment for options

MEMORY HiCORDER MR8880

• Measure the startup current when a motor is powered on
• Record PLC timing
• Identify voltage drop during a power outage

MEMORY HiCORDER MR8875

• Measure acceleration fluctuation in automobiles, transportation equipment and industrial robots
• Performance and durability testing
• Inverter and motor testing

MEMORY HiCORDER MR8740

• Measure minute fluctuations in output from sensors in automobiles and other equipment
• Identify voltage fluctuations in devices such as batteries at high levels of precision and resolution
• Function generator, arbitrary waveform generator, and waveform measurement in a single device

MEMORY HiCORDER MR8870

• Elevator maintenance, machine, motor and inverter fault analysis, testing and inspections
• Record motor rush current
• Measure CB timing
• Analyze sequence controller issues

MEMORY HiCORDER MR8847A

• Operation testing and evaluation of inverters and UPS during load fluctuation and switching
• Analyze the relationship between engine control and vibration during vibration testing
• Identify power fluctuations when power supply is cycled

MEMORY HiCORDER MR8741

• Measure minute fluctuations in output from automobile sensors in automobiles and other equipment
• Identify voltage fluctuations in devices such as batteries at high levels of precision and resolution
• Function generator, arbitrary waveform generator, and waveform measurement in a single device

MEMORY HiCORDER MR6000

Test ECUs, inverters and motors
Measure large currents in fields of solar power, EV/HEV/PHEV development
Measure inverter and switching power supply signals with direct input

MEMORY HiCORDER MR8740T

• Test high performance ECU boards
• Multi-point testing of engine, driving, and ride comfort management systems
• Record signals captured by various sensors to identify air flow, throttle, torque, speed, vibration, humidity, etc.

6409 Tue, 02/28/2017 - 12:00 Off Product & Option / 製品とオプション SP3000 SP3000-01 SP9001

• Supports φ1mm to 2.5mm covered wires
• 10Hz to 100kHz frequency bandwidth
• 5Vrms 14Vp-p rated measurement voltage

Observe waveforms with an oscilloscope or a Hioki Memory HiCorder by visualizing signals from electric equipment simply by applying the probe to the wire’s insulation
Capture LIN and other communications signals
Measure signals from electric equipment on vehicles

Miniaturization of devices and use of waterproof connectors make it impossible to establish contact with metal terminals
Connectors can’t be removed due to reduced ability to reproduce phenomena
There is need to avoid tearing the wire insulation so as to prevent risk of damage to the sensor due to static electricity

SP3000-01 SP3000 6409 NON-CONTACT AC VOLTAGE PROBE SP3000 | SP9001 Capture Voltage Signals from Outside the Wire Cover. | NON-CONTACT AC VOLTAGE PROBE SP3000 | SP9001 Non-contact Voltage Probe, Non-contact CAN Sensors Not Display / 表示しない Thu, 02/22/2024 - 12:00

hiokicmsadmin — Thu, 24 Oct 2019 19:30:06 +0000

NON-CONTACT CAN SENSOR SP7001, SP7002 hiokimanage_sg_en Memory Recorder Options Non-contact Voltage Probe, Non-contact CAN Sensors

NON-CONTACT CAN SENSOR Easy CAN Acquisition
Simply Pinch Over Wire Insulation The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary for vehicle and next generation equipment evaluation and development. Improve testing productivity and efficiency by eliminating the need to peel away cable insulation or use a sub-harness that is traditionally required to obtain signals. Current product / 現行製品 • Capture signals without affecting CAN bus or ECUs
• No need to alter vehicle cables
• High-sensitivity mode for hard to detect signals • Innovative non-contact CAN/CAN FD sensor that improves testing productivity

No need for a sub-harness: Simply hook probes over wire insulation
Capture CAN signals without the need to fabricate sub-harnesses or strip back cable insulation so as to significantly reduce the number of man-hours spent on test preparation.

1. One-handed operation to open the probe tip.
2. Hook the open end to the CAN bus.
3. Automatically locks on when you release your hand.

One-handed probing to easily reach hard-to-get-to areas that are tight, deep, and crowded with cables.

Industry-standard CAN output connector pin layout. Customers who already have a CAN analysis system such as those manufactured by Vector Informatik GmbH need only connect the sensor to that system’s input terminal (via a D-sub 9-pin connector).

Acquire CAN signals in environments from -40°C to 85°C (-40°F to 185°F), the temperature range required in vehicle testing.

If you’re using automatic input polarity mode (*), the SP7001/SP7002 will automatically switch the input polarity to ensure you can capture CAN signals properly, even if the probes are connected in reverse relative to the CAN bus’s polarity (CAN_High/CAN_Low).

*: This function will operate as long as the CAN bus load factor is at least 5%.

Use high-sensitivity mode (*) to broaden the detection level when the CAN signal amplitude is low relative to the CAN standard or when you are unable to detect a signal due to cable conditions.
*: It is recommended to use default mode under typical situations since it delivers the optimal level of vibration and noise immunity.

The SP7001/SP7002 acquires signals without changing the electrical characteristics of the CAN bus. Even if the vehicle is equipped with an ECU that has a security lock-out function designed to detect changes in the CAN bus’s electrical characteristics, you’ll be able to carry out testing without worrying about getting locked out.

The sensor delivers noise immunity designed for in-vehicle testing in a variety of road environments. Acquire CAN signals in a stable manner in evaluation testing not only on test courses, but also in vehicles undergoing test-drives on public roads.

Vibration resistance
vibration acceleration: 45 m/s^2 (4.6 G)

The sensor delivers enough noise immunity to acquire CAN signals in a variety of noise environments. Acquire CAN signals in a stable manner, even with vehicles such as EVs and HVs that rely increasingly on electric equipment.

Because it acquires signals without making electrical contact, the SP7001/SP7002 is ideal for use in tests where CAN bus insulation cannot be modified. Also apply in the development of advanced driver assistance systems (ADAS) and self-driving technology.
Driving is possible while the sensor is connected to the CAN bus.

The non-contact method captures CAN signals reliably and accurately, just like the contact method. In addition, with a CAN signal detection delay of just 130 ns, the sensor delivers real-time performance.

Unlike the contact method, the non-contact method does not distort the original signal when probing the CAN bus. This approach avoids communication errors caused by degraded communications quality.
Model with CAN FD support: SP7001

The Non-Contact CAN Sensor does not affect the electrical characteristics of the CAN bus, allowing you to reliably catch the occasional CAN error events.

Only a tiny percentage of all CAN signals can be acquired from the OBD-II connector that is used in vehicle diagnostics. By using the product with the vehicle’s internal CAN bus, you can acquire all CAN signals.

1. Reduce the number of man-hours needed to prepare the vehicle for testing and then restore to original condition
The SP7001/SP7002 lets you acquire CAN data without time-consuming preparations such as fabricating sub-harnesses and modifying cables. In addition, all you’ll need to do after the test is finished is remove the sensors. There’s no impact on the vehicle.

2. Safely conduct noise application tests thanks to the isolated design
When checking the operation of vehicle sensors and ECUs, for example with tests that apply noise, the sensor protects connected devices from damage and malfunctions caused by noise because it is isolated from CAN signal lines.

3. Fostering smooth validation
The sensor makes it easy to conduct standalone and combination evaluations, including even sudden reevaluations following changes made to vehicle parts during the validation process.

The number of ECUs in vehicles is growing rapidly as ADAS and other safety features are enhanced and as adoption of self-driving vehicles increases, leading to more complex CAN buses. The convenience of the Non-Contact CAN Sensor makes it easy to acquire the information you need.

It can be used not only in automobiles but also in various fields where CAN signals are used.

This system requires three components: the signal probe, sensor, and CAN interface.
You can either order the set models or order the system components individually. When ordering the components, please make sure to use the specific model name of each.

Detection method	Capacitive-coupled signal detection No bare-wire connections
Detectable cables	AVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in)
Number of channels	1 CH (SP7150), 2 CH (SP7100)
Compatible communications speeds	SP7001: CAN, CAN FD 125 kbit/s to 3 Mbit/s SP7002: CAN 125 kbit/s to 1 Mbit/s
Total delay time	130 ns (typical)
CAN terminal resistance	60 Ω (typical), built-in
Signal output connector	D-sub 9-pin female
Operating temperature, humidity	Temperature: -40 °C to 85 °C (-40 °F to 185 °F) Humidity: -40 °C to 60 °C (-40 °F to 140 °F), 80% RH or less (with no condensation), 60 °C to 85 °C (140 °F to 185 °F), 60% RH or less (with no condensation)
Power supply	(1) When using the SP7001-95 or SP7150 - USB bus power (5 V DC), Maximum rated power: 8 VA - Z1013 AC Adapter: Rated supply voltage: 100 V to 240 V AC, Maximum rated power: 6 VA (including AC adapter), 1 VA (product only) (2) When using the SP7001-90, SP7002-90, or SP7100 - Z1008 AC Adapter: Rated supply voltage: 100 V to 240 V AC, Maximum rated power: 8 VA (including AC adapter), 3 VA (product only) - External power supply: Rated supply voltage: 10 V to 30 V DC, Maximum rated power: 3 VA
Dimensions and mass (*1)	SP7001, SP7002: 44 W × 85 H × 20 D mm (1.73 in. W × 3.35 in. H × 0.79 in. D), 180 g (6.35 oz.), Cable length: 2.5 m (8.20 ft.) SP7100: 55 W × 120 H × 25 D mm (2.17 in. W × 4.72 in. H × 0.98 in. D),130 g (4.59 oz.), Cable length: 0.3 m (0.98 ft.) SP7150: 47 W × 100 H × 20 D mm (1.85 in. W × 3.94 in. H × 0.79 in. D),100 g (3.52 oz.), Cable length: 0.3 m (0.98 ft.) SP9250:10.5 W × 24.5 H × 101 D mm (0.41 in. W × 0.96 in. H × 3.98 in. D),45 g (1.59 oz.), Cable length: 0.8 m (2.62 ft.) SP9200: φ11.6 × 33.7 H mm (φ0.46 in. × 1.33 in.), 26 g (0.92 oz.), Cable length: 0.5 m (1.64 ft.)
Included accessories (SP7001, SP7002)	Quick Start Manual ×1, Operating Precautions ×1
Included accessories (SP7100)	Quick Start Manual ×1, Operating Precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1
Included accessories (SP7150)	Quick Start Manual ×1, Operating Precautions ×1, Spiral tube (for fixing power cable) ×1, USB Cable L9510 ×1, Ground connection cable ×1, Alligator clip ×1

*1:Dimensions do not include cables. Mass includes cables.

NON-CONTACT CAN SENSOR SP7001

Sensor box only, supports CAN FD / CAN signals

NON-CONTACT CAN SENSOR SP7002

Sensor box only, supports CAN signals

SIGNAL PROBE SP9200

Screw type, Set of 2

SIGNAL PROBE SP9250

Trigger Type, Set of 2

CAN INTERFACE SP7100

2 ch, power supply +10 V to + 30 V DC

CAN INTERFACE SP7150

1 ch, USB power supply

AC ADAPTER Z1008

100 V to 240 V AC

AC ADAPTER Z1013

100 V to 240 V AC

POWER CABLE L9500

For supplying 10 V to 30 V DC

USB CABLE L9510

USB A-C type

SPLIT CABLE SP9900

For CH1, CH2 output branch

CARRYING CASE C1013

Hard case, 2CH can be stored

MEMORY HiCORDER MR8875

Learn more

• Max. 16ch Analog + 8ch Logic
• 60ch scanner
• 500k-Sampling/s

CAN UNIT MR8904

Learn more

・ 2 port, CAN signal (CAN FD is not supported)
・ 15 analog ch equivalent
・ 16 logic ch equivalent

MEMORY HiCORDER MR6000

Learn more

• Max. 32ch Analog to 128ch Logic
• Max. 200M-Sampling/s (16ch)
• 1G-Word Memory (1ch)

MEMORY HiCORDER MR8875

• Measure acceleration fluctuation in automobiles, transportation equipment and industrial robots
• Performance and durability testing
• Inverter and motor testing

CAN UNIT MR8904

2 port, CAN signal (CAN FD is not supported)15 analog ch equivalent

MEMORY HiCORDER MR6000

Test ECUs, inverters and motors
Measure large currents in fields of solar power, EV/HEV/PHEV development
Measure inverter and switching power supply signals with direct input

6509 Fri, 06/25/2021 - 12:00 Off Product & Option / 製品とオプション SP7001 SP7001-90 SP7002 SP7002-90

• Capture signals without affecting CAN bus or ECUs
• No need to alter vehicle cables
• High-sensitivity mode for hard to detect signals

The SP7001,SP7002 Non-Contact CAN Sensor allows you to acquire CAN bus signals from outside the wire coating. CAN signals are the main control signals inside a car.
Until now, engineers needed to spend immense man hours to process the CAN bus wire. With the Non-contact CAN sensor, monitoring CAN data is easier than ever. Since wires remain undamaged, the CAN bus remains unaffected even during monitoring.

This video shows how the NON-CONTACT CAN SENSOR and MEMORY HiLOGGER LR8450-01 are used to measure the temperature of an actual vehicle. The analog data measuring the temperature inside the vehicle and the CAN data are simultaneously displayed on the waveform in real time.

3D View

Acquire CAN FD/CAN data immediately, simply by pinching probes over wire insulation with one-hand
Eliminate concerns by using non-contact sensing technology
Use in a diverse array of development and evaluation applications that demand reliability

SP7001, SP7002 6509 Non-contact CAN sensor SP7001, SP7002 Monitor CAN FD/CAN Signals Without a Sub-Harness | Non-contact CAN sensor SP7001, SP7002 Non-contact Voltage Probe, Non-contact CAN Sensors Not Display / 表示しない

hiokicmsadmin — Mon, 19 Oct 2020 00:00:00 +0000

Sample program for communication with HIOKI products hiokimanage003 3153 3157 3158 3159 3174 3237 3238 3239 3333 3333-01 3334 3334-01 3334-10 3334-11 3334-20 3334-21 3504 3506-10 3511-50 3561 BT3562 BT3563 BT4560 DM7275-01 DM7275-02 DM7275-03 DM7276-01 DM7276-02 DM7276-03 IM3523 IM3523A IM3533 IM3533-01 IM3536 IM3570 IM3590 IM7580A-1 IM7580A-2 IM7581-01 IM7581-02 IM7583-01 IM7583-02 IM7585-01 IM7585-02 IM7587-01 IM7587-02 PW3335 PW3335-01 PW3335-02 PW3335-03 PW3335-04 PW3336 PW3336-01 PW3336-02 PW3336-03 PW3337 PW3337-01 PW3337-02 PW3337-03 PW3390-01 PW3390-02 PW3390-03 PW6001-01 PW6001-02 PW6001-03 PW6001-04 PW6001-05 PW6001-06 PW6001-11 PW6001-12 PW6001-13 PW6001-14 PW6001-15 PW6001-16 PW8001-01 PW8001-02 PW8001-03 PW8001-04 PW8001-05 PW8001-06 PW8001-11 PW8001-12 PW8001-13 PW8001-14 PW8001-15 PW8001-16 RM3542 RM3543 RM3544 RM3545 SM7110 SM7120 SM7420 SM7810 SM7860-01 SM7860-02 SM7860-03 SM7860-04 SM7860-05 SM7860-06 SM7860-07 SM7860-21 SM7860-22 SM7860-23 SM7860-24 SM7860-25 SM7860-26 SM7860-27 ST4030 ST5520 ST5540 ST5541 TM6102 TM6103 TM6104 Freeware Impedance Analyzers, up to 3 GHz LCR Meters, up to 10 MHz Resistance Meters Super Megohmmeters, Electrometers, Picoammeters Insulation Testers Power Loggers, Energy Loggers Non-contact Voltage Probe, Non-contact CAN Sensors V2.10

・Please use these programs for reference when constructing your communication program with HIOKI products.
・The source codes needed to send commands and receive data are included in these programs.
・In order to use these sample programs, one of the following programs must be installed on your PC: Visual Studio, VBA, LabVIEW, MATLAB or Python.
・These programs are composed simply so as to be easy to understand. We recommend adding error processing as needed.
・Commands for control HIOKI products are in the instruction manual for each product.

It depends on the operating environment of each development environment.

For communication between PC and HIOKI products

・Microsoft Visual Basic 2017
・Microsoft Visual C# 2017
・Microsoft Visual C++ MFC 2017
・Microsoft Visual Basic for Application (VBA)
・LabVIEW 2017
・Python3.7.2
・MATLAB 2019

・RS-232C
・USB (Virtual COM port)
・GPIB (GPIB board designed by National Instruments or CONTEC)
・LAN (TCP/IP)

V2.10 (October 2020) Latest Version
・Support for 64bit version of Excel with VBA samples
・GUI are added to the Python examples.
・The sample code of VISA is added to the Python sample.

V2.00 (March 2020)
・Release

残す Off Off application Mon, 10/19/2020 - 12:00

hiokicmsadmin — Thu, 24 Sep 2020 11:07:37 +0000

Simultaneous Data Acquisition of CAN and Drive Video hiokiadmin001 Electric Vehicles Automobiles Transport Vehicles Basic Automotive R&D, Validation By combining with the non-contact CAN sensor SP7000 series, you can easily record CAN logs and videos without affecting the test vehicle while diving.

Prism’s MLT Advance is an in-vehicle network tester that supports various protocols including CAN.
You can save the communication logs of the in-vehicle networks and video from a USB camera by using the software MLT Advan Navigator that includes the optional Video Capture module. Check the correlation between the video and communication log, or vice verse.
By combining with the non-contact CAN sensor SP7000 series, you can easily record CAN logs and videos without affecting the test vehicle while driving.

SP7001 SP7001-90 SP7001-91 SP7002 SP7002-90 Non-contact Voltage Probe, Non-contact CAN Sensors Detailed page / 詳細ページ残す Simultaneous Data Acquisition of CAN and Drive Video 113497

Simultaneous Data Acquisition of CAN and Drive Video [327KB]

hiokicmsadmin — Tue, 30 Jun 2020 13:48:58 +0000

Capture CAN FD & CAN Data on Public Roads hiokiadmin001 Electric Vehicles Automobiles Transport Vehicles Basic Automotive R&D, Validation

The non-contact CAN sensor capture CAN data required for developing autonomous driving and ADAS(Advanced Driver-Assistance Systems).

SP7002-90 SP7002 SP7001-91 SP7001-90 SP7001 Non-contact Voltage Probe, Non-contact CAN Sensors Detailed page / 詳細ページ残す Capture CAN FD & CAN Data on Public Roads 113492

Capture CAN FD & CAN Data on Public Roads [282.57KB]

hiokicmsadmin — Tue, 30 Jun 2020 13:18:02 +0000

Connectable Products of the Non-Contact CAN Sensor SP7001/SP7002 hiokiadmin001 Electric Vehicles Automobiles Transport Vehicles Basic Automotive R&D, Validation The non-contact CAN sensor SP7000 series detect CAN signals from outside insulation

This PDF introduces CAN analysis tools (HIOKI and other companies product) that can be connected to the non-contact CAN sensors. It also introduces how to connect to an oscilloscope.

SP7001 SP7001-90 SP7001-91 SP7002 SP7002-90 SP7012 MR6000 MR6000-01 MR8875 MR8875-30 Data Acquisition (DAQ) for R&D and Testing Applications Non-contact Voltage Probe, Non-contact CAN Sensors Detailed page / 詳細ページ残す Connectable Products of the Non-Contact CAN Sensor SP7001/SP7002 113491

Connectable Products of the Non-Contact CAN Sensor SP7001/SP7002 [428.35KB]

hiokicmsadmin — Wed, 07 Apr 2021 00:00:00 +0000

Difference between the Non-Contact CAN Sensor SP7001 and SP7002 hiokiadmin001

The supported communication standards differ.
The SP7001 supports both CAN and CAN FD, while the SP7002 supports only CAN.

[Target communication speed]
SP7001: CAN, CAN FD 125 kbit/s to 3 Mbit/s
SP7002: CAN 125 kbit/s to 1 Mbit/s

CAN FD (CAN with Flexible Data Rate) is a communication protocol that supports higher communication speed and larger transmitted and received data capacity than the conventional CAN.

Click here for details.

Considering the purchase of Non-Contact CAN Sensor SP7001 or the SP7002.
What is the difference between SP7001 and SP7002? Non-contact Voltage Probe, Non-contact CAN Sensors new 999999 489

Measurement method

Capacitive-coupled current cancellation (not suitable for use with bare conductors)

Measurable wire type

Insulated wire

Maximum input voltage

RMS : 30 Vrms or less, Peak : 42.4 Vpeak or less

Dimensions and mass

15.0 mm (0.59 in) W × 13.9 mm (0.55 in) H × 77.4 mm (3.05 in) D mm, 52 g (1.83 oz) (including cable)

hiokicmsadmin — Sun, 01 Mar 2020 00:00:00 +0000

Second hand instruments hiokiadmin001 We regret to inform you there is no warranty for second-hand products. Please contact the seller from whom you purchased the product. I bought second hand Hioki products online in my country. Is there any warranty from the supplier? Data Acquisition (DAQ) for R&D and Testing Applications Data Acquisition (DAQ) for Service and Maintenance Applications Memory Recorder Options Data Acquisition PC Software Multichannel Data Loggers Data Loggers, Wireless, Bluetooth®, Radio Heat Flow Loggers Power Loggers, Energy Loggers Wireless Compact Loggers with Bluetooth® Technology Compact Data Logger Series Impedance Analyzers, up to 3 GHz LCR Meters, up to 10 MHz Capacitance Meters, up to 1 MHz Test fixture or Probes Resistance Meters Battery Testers Super Megohmmeters, Electrometers, Picoammeters Super Megohmmeter Options Power Sources of Super Megohmmeter Impulse, Surge Testers Hipot/Insulation/Withstand Voltage Testers Test Data Management Software Equipment Leakage Current Testers Insulation Testers Ground Bond Testers DC Voltmeters, 7-1/2 Digit Digital Multimeters, 5-1/2 Digit Systems Integrated Digital Multi-Module (DMM) Stations Handheld Digital Multimeters, 4-1/2 Digit Arbitrary Waveform/Function Generators Signal Generators, Calibrator High Precision Power Analyzers, Power Meters for Motors and Inverter Efficiency Analysis High Precision Power Meters - 3-phase AC/DC High Precision Power Meters - Single Phase AC/DC High Precision Power Meters - Single Phase AC Power Quality Analyzers (PQA) Power Loggers, Energy Loggers Handheld Portable Power Meters Non-contact Voltage Probe, Non-contact CAN Sensors Current Waveform Observation High Accuracy Pass-through AC/DC Current Sensors, DC to 20 kHz AC Current Sensors, up to 50 kHz Load Current Sensors Power Supplies for Current Sensors LAN Cable Testers Magnetic Field Meters Infrared Thermometers Temperature Meters Heat Flow Measurement Light Meters, Lux Meters Digital Multimeters, 4-1/2 Digit Digital Multimeters, 3-1/2 Digit Compact Digital Multimeters Analog Multimeters Digital Insulation Testers for PV Systems, 5-range High-voltage Digital Insulation Testers, 5 kV Insulation Testers Digital Insulation Testers, 5-range Analog Insulation Testers, 4-range Analog Insulation Testers, 3-range Analog Insulation Testers, Single-range AC/DC Clamp Meters AC Clamp Meters AC Current Measurement Options Leakage Current Clamp Meters Clamp Power Meters Connecting instruments in the field with IT Ground Resistance Testers, Earth Ground Testers Phase Rotation Meters, Phase Detectors Voltage Testers, Voltage Detectors Connecting Instruments in the PV field with IT Inspect Solar panel Bypass Diodes Tester PV Insulation Resistance Tester Ground Resistance Testers, Earth Ground Testers Up to 1000 V DC input Testers The Power to Connect Bare Board Testing (flying probe tester) Bare Board Testing with test fixture Populated Board Testing Application Software Connecting instruments in the field with IT Advanced Technologies Other Electrical Measuring Instruments 999999 431