Generation unit can be used for various simulation tests instead of sensor output

Key Features • As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance • DC voltage, DC current, and resistance simulation output possible • In resistance generation, the voltage to be connected is measured, the output current is calculated from the set resistance value, and simulated output • Used in combination with Memory HiCorder series MR8740T (not available in other models) • Insulation between each output channel and between channel and chassis

Model No. (Order Code)

U8794 For the MR8740-50

Note: This module must be used with the Memory HiCorder. Output cords are not included. Please purchase them separately.


Basic specifications (Accuracy guaranteed for 1 year)

Output terminalNumber of channels: 8 (each channel is isolated), Connector: 25-pin D-sub
Max. rated voltage to earth: 25 V
Output itemsDC voltage, DC current, resistance (simulated output)
Output rangeDC voltage: -0.100 0 V to +5.300 0 V (setting resolution: 0.1 mV)
DC current:
5 mA range: -5.000 0 mA to +5.000 0 mA, Setting resolution: 0.1 μA
1 mA range: -1.000 00 mA to +1.000 00 mA, Setting resolution: 0.01 μA
250 μA range: -250. 00 μA to +250.00 μA, Setting resolution: 0.01 μA
50 μA range: -50. 000 μA to +50. 000 μA, Setting resolution: 0.001 μA
Resistance: 10 Ω to 1 MΩ, Setting resolution: 6 digits
Output accuracyDC voltage: 5 V range, ±0.035% of setting ± 800 μV
DC current:
5 mA range: ±0.050% of setting ± 4.0 μA
1 mA range: ±0.050% of setting ± 800 nA
250 μA range: ±0.050% of setting ± 200 nA
50 μA range: ±0.050% of setting ± 40 nA
OtherSelf diagnostic, switch output terminals, estimate target connection, cancel offset
Dimensions and mass106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 280 g (9.9 oz)

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.


No results were found.

User Guides

No results were found.


No results were found.

Outline Drawings


Technical Notes

No results were found.

Declaration of Conformity

No results were found.

Drivers, Firmware

No results were found.


No results were found.


Compatible products

* Main products are listed below. For more information, please see each product page.


• Max. 108ch Analog • Max. 96ch Analog + 48ch Logic • 20M-Sampling/s

Learn more



No results were found.

  • Search

    Search Results Include Discontinued Products

    Login to myHIOKI


  • Ask

    • Ask Online


  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List