HIGH SPEED ANALOG UNIT

U8976

High speed 200 MS / s, isolated input

Key Features • High-speed sampling of 200 MS / s ensures catching high-speed phenomena • Isolated input (ground-to-ground AC, DC 1000 V) • High resolution measurement with 12 bit A/D • For Memory HiCorder MR6000 only

Model No. (Order Code)

U8976 For the MR6000 and similar products

Note: Use it by installing it in the Memory HiCorder. Input code kind is not included so purchase separately.

Guarantee3years
CE

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Measurement functionsNumber of channels: 2, for voltage measurement
Input terminalsIsolated BNC terminal (Input impedance: 1 MΩ, Input capacitance: 22 pF)
Max. rated voltage to earth: 1000 V AC or DC (with input isolated from the unit, the maximum voltage that can be applied between input channel and chassis and between input channels without damage)
Measurement range100, 200, 400 mV f.s., 1, 2, 4, 10, 20, 40, 100, 200, 400 V f.s., 12 ranges
(AC voltage for possible measurement/display using the memory function: 280 V rms)
Low-pass filter: 5/500/5 k/1 MHz
Measurement resolution1/1600 of measurement range (using 12-bit A/D conversion)
Highest sampling rate200 MS/s (2 channel simultaneous sampling)
Measurement accuracy±0.5% f.s. (with filter 5 Hz, zero position accuracy included)
Frequency characteristicsDC to 30 MHz -3 dB, with AC coupling: 7 Hz to 30 MHz -3dB
Input couplingAC/DC/GND
Max. allowable input400 V DC (when direct input), 1000 V DC (when using the 9665)
Dimensions and mass106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 280 g (9.9 oz)
AccessoriesNone

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Seminar Schedule

Registration Open

IEEE IFEEC 2019 - Singapore

Nov 25, 2019 - Nov 28, 2019

Registration Open

SPS - Nuremburg, Germany

Nov 25, 2019 - Nov 28, 2019

Catalogs

No results were found.

User Guides

No results were found.

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.


Instruction Manual Japanese
English
Ver.09

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.



Ver.00

Declaration of Conformity

No results were found.

Drivers, Firmware

No results were found.

Others

No results were found.

Options

Use with these Products

* Main products are listed below. For more information, please see each product page.

MEMORY HiCORDER MR6000

• Test ECUs, inverters and motors • Measure large currents in the fields of solar power and EV/HEV/PHEV development • Measure inverter and switching power supply signals with direct input

Learn more

Voltage measurement Type A

* Input voltage is limited to the specifications of the input modules in use

* Max. rated voltage to earth is limited to the specifications of the input modules in use

CONNECTION CORD L9790

• Flexible φ 4.1 mm (0.16 in) thin dia. • Cable allowing for up to 600 V input • 1.8 m (5.91 ft) length

ALLIGATOR CLIP L9790-01

Red/black set attaches to the ends of the Connection Cord L9790

GRABBER CLIP 9790-02

Red/black set attaches to the ends of the Connection Cord L9790

CONTACT PIN 9790-03

Red/black set attaches to the ends of the Connection Cord L9790

Voltage measurement Type B

* Input voltage is limited to the specifications of the input modules in use

* Max. rated voltage to earth is limited to the specifications of the input modules in use

CONNECTION CORD L9198

•φ 5.0 mm (0.20 in) dia. •Cable allows for up to 300 V input •1.7 m (5.58 ft) length •Small alligator clip

Voltage measurement Type C

* Input voltage is limited to the specifications of the input modules in use

* Max. rated voltage to earth is limited to the specifications of the input modules in use

CONNECTION CORD L9197

•φ 5.0 mm (0.20 in) dia •Cable allows for up to 600 V input •1.8 m (5.91 ft) length •Includes detachable large alligator clips

GRABBER CLIP 9243

Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V

Voltage measurement Type D

* Max. rated voltage to earth is limited to the specifications of the input modules in use

* For a list of compatible Memory HiCorders, please see the product catalog

10:1PROBE 9665

・1 kV rms Max. (500 kHz or less) ・Max. rated voltage to earth depends on input unit.

Learn more

100:1PROBE 9666

・5 kV peak Max. (1 MHz or less) ・Max. rated voltage to earth depends on input unit.

Learn more

Applications

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

    • Ask Online

     

  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List