AC/DC CURRENT SENSOR
CT6862
Delivering Wide-Operating Temperature Range and High-precision Current Measurement
Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6862 is a DC to 1MHz/50A sensor, and this is ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc. CAT III 1000 V Key Features • Super high precision, ±0.05% amplitude accuracy, ±0.2° phase accuracy • Wide-bandwidth DC to 1 MHz excellent frequency characteristics • Applications in the fields of electric and hybrid electric vehicles • Wide operating temperature range(-30 ℃ to 85 ℃) fit for automobile applications • Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters • For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with SENSOR UNIT)
CT6862 | 50 A AC/DC, PL23 terminal |
---|
Rated current | 50 A AC/DC |
---|---|
Max. allowable input | 100 A rms (requires derating) |
Frequency characteristics | Amplitude: DC to 1 MHz Phase: DC to 300 kHz |
Amplitude and Phase accuracy | DC ±0.05 % rdg. ±0.01 % f.s. (Phase: Not defined) 16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2°) Defined to 1 MHz |
Output voltage | 2 V /rated current value (voltage output with the Sensor Unit, use with a device having a 1 MΩ input resistance or higher) |
Max. rated voltage to earth | 1000 V AC/DC (50/60 Hz, CAT III ) |
Core diameter | φ 24 mm (0.94 in) |
Operating temperature, humidity | -30°C to +85°C (-22°F to 185°F), 80% RH or less (with no condensation) |
Power supply | ±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC) |
Power consumption | 5 VA max. (at 50 A/55 Hz, ±12 V power requirement) |
Dimensions and mass | 70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, 340 g (12.0 oz), cord length: 3 m (9.84 ft) |
Accessories | Instruction manual ×1, Mark bands ×6 |
Compatible models | CT6862 | CT6862-05 |
---|---|---|
Power Analyzer PW6001, PW3390 | △ (Requires CT9900) | OK |
Power Analyzer 3390 | OK | △ (Requires CT9901) |
Power HiTester 3193 series | OK | △ (Requires CT9901) |
Current Unit 8971 | △ (Requires the 9318) | △ (Requires the 9318, CT9901) |
F/V Unit 8940 | N/A | N/A |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
No results were found. |
Catalog: AC/DC CURRENT SENSOR CT6862, CT6863, 9709 | Download PDF [1MB] |
English |
Catalog: AC/DC CURRENT SENSOR CT6860 series | Download PDF [2MB] |
English |
Catalog: SENSOR UNIT CT9555, CT9556, CT9557 | Download PDF [1MB] |
English |
Catalog: HIGH ACCURACY / WIDEBAND CURRENT SENSOR Series CT686x, CT687x, CT684x | Download PDF [8MB] |
English |
No results were found. |
If you can not download, log into your myHioki account to access more technical documents and information where available.
AC/DC CURRENT SENSOR CT6862,CT6863,CT6862-10,CT6863-10 [240KB] |
Instruction Manual |
English |
Ver.08 |
If you can not download, log into your myHioki account to access more technical documents and information where available.
AC/DC CURRENT SENSOR CT6862 [156KB] |
Ver.00 |
AC/DC CURRENT SENSOR CT6862,CT6862-05,CT6862-10,CT6863,CT6863-05,CT6863-10 [99KB] |
Ver.06 |
No results were found. |
No results were found. |
SENSOR UNIT CT9555
• Power supply for current sensor when used as standalone sensor • Use with high precision sensors to measure equipment such as high-capacity solar power conditioners and inverters
SENSOR UNIT CT9556
• Power supply for current sensors when used as standalone sensors • Use with high precision sensors to measure equipment such as high-capacity solar power conditioners and inverters
SENSOR UNIT CT9557
• Power supply for current sensors when used as standalone sensors • Output individual or single waveform from an aggregate of input waveforms • Use with high precision sensors to measure equipment such as high-capacity solar power conditioners and inverters
CONNECTION CORD L9217
Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length
CONNECTION CORD 9165
Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length
The CT9903 connects up to 2 cables in series, Cannot be used in combination with the 9277 to 9279
CONVERSION CABLE CT9900
Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal
EXTENSION CABLE CT9903
5 m (16.41 ft) length, PL23 (10 pin) - PL23 (10 pin) connector
The CT9902 connects up to 2 cables in series
CONVERSION CABLE CT9901
ME15W (12 pin) to PL23 (10 pin) connector
EXTENSION CABLE CT9902
5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector
For connecting to the F/V Unit 8940 or Current Unit 8971
CONVERSION CABLE 9318
To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length
No results were found.