AC/DC Auto-zero Current Sensor

Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7742 is a 2000 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 for convenient field testing, while delivering an extended temperature range and auto-zero adjustment to minimize drift due to wide temperature changes that occur during long-term testing. Further extend the functionality of this system by connecting the Display Unit with a Hioki memory recorder or logger. CAT IV 600 V Key Features • Accurately measure and record even when the temperature changes • Ideal for site inspections by using detachable Display Unit • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz

Model No. (Order Code)

CT7742	2000 A AC/DC, φ55 mm (2.17 in)

Note: CT7700 series cannot be used alone. Use with the Display Unit CM7290, CM7291 to connect with Data Loggers and Memory HiCorders. When used in combination with CM7290 or CM7291, the frequency band of current display and waveform output becomes narrow.

Connect to Recorders, Data loggers, and Oscilloscopes

Must be paired with the Display Unit CM7290 or CM7291 to operate as a standalone unit. Add an output cord to deliver signals to a data logger or Memory HiCorder for the following types of output: • A DC or AC (up to 5 kHz/10 kHz) current waveform as-is (using WAVE mode for waveform output) • An analog signal generated by converting the input waveform to a series of RMS values (using RMS mode for RMS output) • An analog signal generated by detecting the current waveform’s peak value (using PEAK mode for peak output • An analog waveform generated by detecting the frequency of the current waveform (using FREQ mode for frequency output)

Broad temperature range

A wide operating temperature range of -25°C to 65°C (-13°F to 149°F) lets you use the sensor even in sub-freezing temperatures and on hot summer days.

Take measurements without shifts in the zero-point, even during extended recording with temperature variations

Because temperature variations cause the zero-point to shift when using a conventional DC current sensor to measure DC current, it is necessary to perform zero-adjustment periodically when recording data over an extended period of time with such a sensor. This shortcoming is caused by the effects of the Hall element that conventional DC current sensors use to to detect current. Hioki’s new auto-zero current sensors incorporate a new switching-based offset cancellation circuit developed to address this problem. The new design minimizes zero-point shift, making it possible to record DC current values over an extended period of time without the need for periodic zero-adjustment.

Transfer data wirelessly using Bluetooth(R) to GENNECT Cross mobile app

Pair with the CM7291 Display Unit to send measurement data to a smartphone or tablet using Bluetooth® wireless technology. Use the GENNECT Cross dedicated app to display and review measured values and waveforms in real time.

Basic specifications (Accuracy guaranteed for 3 years, Post-adjustment accuracy guaranteed for 3 years)

Rated measurement current	2000 A AC/DC
Max. measurement current	2000 A (requires derating at frequency)
Max. allowable peak input	2840 A peak
Bandwidth	DC to 5 kHz (-3dB) (When used in combination with CM7290 or CM7291: DC 3 Hz to 1 kHz)
Typical accuracy	±2.3 deg. (DC < f ≤ 66 Hz)
Output rate	0.1 mV/A
Max. rated voltage to earth	AC/DC 600 V (CAT IV) AC/DC 1000 V (CAT III)
Core diameter	φ 55 mm (2.17 in) or less
Output connectors	HIOKI PL 14
Operating temperature range	-25 °C to 65 °C (-13 °F to 149 °F)
Dimensions and mass	64 mm (2.52 in)W × 195 mm (7.68 in)H × 34 mm (1.34 in)D, 510 g (18.0 oz), Cable length 2.5 m (8.20 ft)
Accessories	None

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Seminar Schedule

No results were found.

Catalogs

Catalog: AC/DC CURRENT SENSOR CT7000 Series, DISPLAY UNIT CM7290, CM7291

Download PDF [4MB]

English

User Guides

No results were found.

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.

Output current sensor [4MB]	Operating Precautions	Japanese English Simplified Chinese Korean Traditional Chinese Spanish German French Italian	Ver.01
AC/DC AUTO-ZERO CURRENT SENSOR CT7731,CT7736,CT7742 [1MB]	Instruction Manual	English	Ver.01
AC/DC AUTO-ZERO CURRENT SENSOR CT7731,CT7736,CT7742 [798KB]	Instruction Manual	Simplified Chinese	Ver.00

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.

AC/DC AUTO-ZERO CURRENT SENSOR CT7742 [108KB]

Ver.00

Technical Notes

AC/DC Current Sensor CT7631/CT7636/CT7642,AC/DC Auto-Zero Current Sensor CT7731/CT7736/CT7742,Display Unit CM7290/CM7291 [2MB]

Combination accuracy table of CM 7290, CM 7291 and corresponding current sensor. [920KB]

Declaration of Conformity

AC/DC AUTO-ZERO CURRENT SENSOR CT7731,CT7736,CT7742 [99KB]

Ver.01

Drivers, Firmware

No results were found.

Others

No results were found.

Options

Display, Output

DISPLAY UNIT CM7290

• Pair with CT7000 series AC/DC current sensors to use as standalone clamp sensors • Add output cord to view signals as waveforms, RMS, peak or frequency in Hioki data acquisition equipment

Learn more

EXTENSION CABLE L0220-01

2 m (6.56 ft) length

EXTENSION CABLE L0220-02

5 m (16.41 ft) length

EXTENSION CABLE L0220-03

10 m (32.81 ft) length

EXTENSION CABLE L0220-04

20 m (65.62 ft) length

EXTENSION CABLE L0220-05

30 m (98.43 ft) length

EXTENSION CABLE L0220-06

50 m (164.06 ft) length

EXTENSION CABLE L0220-07

100 m (328.11 ft) length

DISPLAY UNIT CM7291

• Pair with CT7000 series AC/DC current sensors to use as standalone clamp sensors or output to data acquisition equipment • Bluetooth(R) wireless technology

Learn more