ANALOG UNIT

MR8905

1000V High-voltage Direct Input Module for Memory Recorders

The Hioki MR8905 input module features direct high –voltage input of up to 1000 V DC and 700 V AC without using a differential probe. This is ideal for primary and secondary measurements of UPS power supplies and commercial power supply transformers, for recording the primary and secondary waveforms of inverters, and for measuring high-voltage power supply lines, such as 380 V and 480 V systems used in many countries.

Model No. (Order Code)

MR8905 For the MR8875

Note: This module must be used with the Memory HiCorder. Compatible with MR8875 firmware version 2.14/3.14 or later. Input cords are not included. Please purchase them separately.

Guarantee3years
CE

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

FunctionsNo. of channels: 2, switchable between instantaneous value and AC RMS value
Input connectorsBanana connector (input impedance 4 MΩ, input capacitance less than 1 pF)
Max. rated voltage to earth: CAT II 1000 V AC & DC, CAT III 600 V AC & DC (with input isolated from the main unit, the max. voltage that can be applied between input channel and chassis and between input channels without damage)
Measurement range500 mV to 50 V/div, 7 ranges, full scale: 20 div
*The maximum displayable AC voltage is 700 Vrms when using 1/2 compression of the vertical axis.
Low-pass filter5/50/500/5 kHz, OFF
Resolution1/1250 of measurement range (using 16-bit A/D converter)
Highest sampling rate500 kS/s (simultaneous sampling across 2 channels)
Accuracy±0.5% f.s. (with 5 Hz filter ON)
RMS measurementRMS accuracy: ±1.5% f.s. (30 Hz up to but not including 1 kHz, sine wave input) or ±3% f.s. (1 kHz up to 10 kHz, sine wave input)
Response time: 300 ms (filter off, rising from 0% to 90% f.s.) or 600 ms (filter off, falling from 100% to 10% f.s.)
Crest factor 2
Frequency characteristicsDC to 100 kHz -3 dB
Input couplingDC/AC-RMS/GND
Max. allowable input1000 V DC, 700 V AC (the max. voltage that can be applied across input pins without damage)
Dimensions and mass119.5 mm (4.70 in)W × 18.8 mm (0.74 in)H × 151.5mm (5.96 in)D, 185 g (6.5 oz)
AccessoriesNone

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Seminar Schedule

No results were found.

Catalogs

No results were found.

User Guides

No results were found.

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.


Instruction Manual Japanese
English
Ver.03

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.



Ver.01

Technical Notes

No results were found.

Declaration of Conformity

No results were found.

Drivers, Firmware

No results were found.

Others

No results were found.

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

    • Ask Online

     

  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List