CAN UNIT

MR8904

Analyse CAN singal module for Memory Recorders

Model No. (Order Code)

MR8904 For the MR8875

Note: This module must be used with the Memory HiCorder. Input cords are not included. Please purchase them separately.

Guarantee3years
CE

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Input CAN portNumber of ports: 2, Connector: D-sub a male 9 pin ×2
StandardsISO 11898 CAN 2.0b, ISO 11898-1, ISO 11898-2, ISO 11898-3, SAE J2411
InterfaceSelectable: High-speed CAN, Low-speed CAN, or Single-wire CAN by port (with built-in corresponding transceiver)
Transmit ACKON/OFF for transmitting a ACK for receiving CAN signal with the MR8904
TerminatorON/OFF via commands, 120 Ω ±10 Ω built-in resistance
Baud rate50 kbps to 1 Mbps at “High-speed”, 10 kbps to 125 kbps at “Low-speed”, 10 kbps to 83.3 kbps at “Single-wire”
Analyzed signal output channelUp to 15 analog channels each equivalent to a 16-bit analog signal
Up to 16 logic channels each equivalent to a 1-bit logic signal
Signal form1-bit signal: 1 channel of Logic, or 1 channel of Analog
1-bit to 16-bits signal: 1 channel of Analog
17-bits to 32-bits signal: 2 channels of Analog
* Cannot handle signals over 32-bits
ID triggerOutput “H” level pulse to designated logic channel when receiving set ID signal
* Output pulse width: 50 μs below 5 ms/div time axis, 1 sampling time at more than 10 ms/div time axis
Response timeWithin 200 μs after completely receiving CAN message
Transmit CAN messageCan transmit the setting CAN message to the CAN bus by a port
Dimensions and mass119.5 mm (4.70 in)W × 18.8 mm (0.74 in)H × 151.5mm (5.96 in)D, 185 g (6.5 oz)
AccessoriesNone

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Seminar Schedule

No results were found.

Catalogs

No results were found.

User Guides

No results were found.

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.


Instruction Manual English
Ver.03
Instruction Manual Japanese
English
Ver.03

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.



Ver.00

Technical Notes

No results were found.

Declaration of Conformity

No results were found.

Drivers, Firmware

No results were found.

Others

No results were found.

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

    • Ask Online

     

  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List