ANALOG UNIT
8966
Max. 20 MS/s, isolated input
Key Features • High 12-bit A/D resolution • Isolated 2 channel input • Max. rated voltage to ground: 300 V AC, DC • Reliably capture instantaneous waveforms using high speed 20 MS/s sampling and A/D converter
8966 | For MR6000, MR8847A, MR8827, and similar products |
---|
Note: This module must be used with the Memory HiCorder. Input cords are not included. Please purchase them separately.
Please refer to the table here for the types of input units that can be used for each Memory HiCorder.
Measurement functions | Number of channels: 2, for voltage measurement |
---|---|
Input connectors | Isolated BNC connector (input impedance 1 MΩ, input capacitance 30 pF), Max. rated voltage to earth: 300 V AC, DC (with input isolated from the unit, the maximum voltage that can be applied between input channel and chassis and between input channels without damage) |
Measurement range | 5 mV to 20 V/div, 12 ranges, full scale: 20 div, (AC voltage for possible measurement/display using the memory function: 280 V rms) Low-pass filter: 5/50/500 Hz, 5 k/50 k/500 kHz |
Measurement resolution | 1/100 of measurement range (using 12-bit A/D conversion and when installed in the 8847) |
Highest sampling rate | 20 MS/s (simultaneous sampling across 2 channels) |
Measurement accuracy | ±0.5 % of full scale (with filter 5 Hz, zero position accuracy included) |
Frequency characteristics | DC to 5 MHz -3 dB, with AC coupling: 7 Hz to 5 MHz -3dB |
Input coupling | AC/DC/GND |
Max. allowable input | 400 V DC (the maximum voltage that can be applied across input pins without damage) |
Dimensions and mass | 106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 250 g (8.8 oz) |
Accessories | None |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
No results were found. |
No results were found. |
No results were found. |
If you can not download, log into your myHioki account to access more technical documents and information where available.
ANALOG UNIT 8966, TEMP UNIT 8967, HIGH RESOLUTION UNIT 8968, STRAIN UNIT U8969, FREQ UNIT 8970, CURRENT UNIT 8971, DC/RMS UNIT 8972, LOGIC UNIT 8973, HIGH VOLTAGE UNIT U8974, 4CH ANALOG UNIT U8975, HIGH SPEED ANALOG UNIT U8976, 3CH CURRENT UNIT U8977, 4CH ANALOG UNIT U8978, CHARGE UNIT U8979, DIGITAL VOLTMETER UNIT MR8990, DIGITAL VOLTMETER UNIT U8991, ARBITRARY WAVEFORM GENERATOR UNIT U8793, WAVEFORM GENERATOR UNIT MR8790, PULSE GENERATOR UNIT MR8791, VIR GENERATOR UNIT U8794 [2MB] |
Instruction Manual |
Japanese English |
Ver.09 |
If you can not download, log into your myHioki account to access more technical documents and information where available.
ANALOG UNIT 8966 [133KB] |
Ver.01 |
No results were found. |
No results were found. |
No results were found. |
No results were found. |
* Input voltage is limited to the specifications of the input modules in use
* Max. rated voltage to earth is limited to the specifications of the input modules in use
CONNECTION CORD L9790
• Flexible φ 4.1 mm (0.16 in) thin dia. • Cable allowing for up to 600 V input • 1.8 m (5.91 ft) length
ALLIGATOR CLIP L9790-01
Red/black set attaches to the ends of the Connection Cord L9790
CONTACT PIN 9790-03
Red/black set attaches to the ends of the Connection Cord L9790
GRABBER CLIP 9790-02
Red/black set attaches to the ends of the Connection Cord L9790
* Input voltage is limited to the specifications of the input modules in use
* Max. rated voltage to earth is limited to the specifications of the input modules in use
CONNECTION CORD L9198
•φ 5.0 mm (0.20 in) dia. •Cable allows for up to 300 V input •1.7 m (5.58 ft) length •Small alligator clip
* Input voltage is limited to the specifications of the input modules in use
* Max. rated voltage to earth is limited to the specifications of the input modules in use
CONNECTION CORD L9197
•φ 5.0 mm (0.20 in) dia •Cable allows for up to 600 V input •1.8 m (5.91 ft) length •Includes detachable large alligator clips
GRABBER CLIP 9243
Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT II 1000 V
GRABBER CLIP L9243
Attaches to the tip of the banana plug cable, Red/Black: 1 each, 185 mm (7.28 in.) length, CAT II 1000 V
* Max. rated voltage to earth is limited to the specifications of the input modules in use
* For a list of compatible Memory HiCorders, please see the product catalog
10:1PROBE 9665
・1 kV rms Max. (500 kHz or less) ・Max. rated voltage to earth depends on input unit.
100:1PROBE 9666
・5 kV peak Max. (1 MHz or less) ・Max. rated voltage to earth depends on input unit.
No results were found.