From R&D Applications to Windings, Coil and Transformer Manufacturing
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3533 series are Hioki’s first LCR meters to offer turn ration, mutual inductance and inductance difference measurements of transformers and coils, and are integrated with an internal DC bias to facilitate HDMI compliance testing. Key Features • ±0.05% accuracy with wide measurement range (DC, 1mHz to 200kHz, 5mV to 5V, 10uA to 50mA) • Non-stop testing over mixed measurement conditions such as C-D and ESR at 10 times the speed of previous models • Built-in low impedance high precision mode effective for testing low inductance or the ESR of aluminum electrolysis capacitance • Dedicated modes for measuring transformer winding ratio, mutual inductance and temperature compensated DCR • Frequency sweep testing (IM3533-01 only) • 2m/4m cable setting in addition to the standard 0m/1m • Touch screen with intuitive operation
|IM3533-01||Advanced function model|
This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. All probes are constructed with a 1.5D-2V coaxial cable. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.
The Hioki IM3533 LCR Meter can perform continuous measurement using different capacitor measurement conditions, for example to perform C-D measurement at 120 Hz and ESR measurement at 100 kHz, without stopping to manually change settings.
In transformer and winding measurement, the Hioki IM3533 LCR meter can measure primary-side and secondary-side L values and then calculate and display the turn ratio. This capability eliminates the need to manually calculate this value, as in the conventional approach.
In transformer measurement, the Hioki IM3533 LCR Meter can perform L measurement with a same-phase series connection and again with a reverse-phase series connection, and then calculate and display the mutual inductance. This capability eliminates the need to manually calculate this value, making it more convenient and efficient than the conventional approach.
The IM3533-01 can perform automatic measurement while sweeping through up to 801 frequencies from a user-specified frequency range or frequency list. Measurement results can be saved on a USB flash drive or computer via the instrument’s interface in order to create lists and graphs of frequency characteristics using the included LCR application software.
Download the sample application and view the Communications Command User Manual.
|Measurement modes||LCR, Transformer testing (N, M, ΔL), Continuous testing (LCR mode)||LCR, Transformer testing (N, M, ΔL), Analyzer (sweep testing), Continuous Testing (LCR/Analyzer mode)|
|Measurement parameters||Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q, N, M, ΔL, T|
|Measurement range||100 mΩ to 100 MΩ, 10 ranges (All parameters defined in terms of Z.)|
|Displayable range||Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ± (0.00000 [unit] to 9.99999G [unit]) Real value display for Z and Y only|
θ: ± (0.000° to 180.000°), D: ± (0.00000 to 9.99999)
Q: ± (0.00 to 99999.9), Δ%: ± (0.0000% to 999.999%), T: -10.0°C to 99.9°C
|Basic accuracy||Z : ±0.05% rdg. θ: ±0.03°|
|Measurement frequency||1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)|
|Measurement signal level||[Normal mode]|
V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms steps
CC mode: 10 μA to 50 mArms, 10 μArms steps
[Low impedance high accuracy mode]
V mode, CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
CC mode: 10 μA to 100 mArms, 10 μArms steps
|Output impedance||Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω|
|Display||5.7-inch touch-screen color TFT, display can be set to ON/OFF|
|Measurement time||2 ms (1 kHz, FAST, display OFF, representative value)|
|Functions||DC bias measurement, DC resistance temperature compensation (converted reference temperature display), Comparator, BIN measurement (classify function), Panel loading/saving, Memory function|
|Interfaces||EXT I/O (Handler), USB communication (high-speed), USB memory|
Optional: Choose 1 from RS-232C, GP-IB, or LAN
|Power supply||100 to 240 V AC, 50/60 Hz, 50 VA max|
|Dimensions and mass||330 mm (12.99 in) W × 119 mm (4.69 in) H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)|
|Accessories||Power cord × 1, Instruction manual × 1, CD-R (Includes PC commands and sample software) × 1|
Log into your myHioki account to access more technical documents and information where available.
|No results were found.|
Aug 20, 2018 - Aug 23, 2018
Sep 17, 2018 - Sep 21, 2018
|Catalog: LCR METER Series||Download PDF [3MB]||
|Catalog: LCR METER IM3523, IM3533||Download PDF [5MB]||
|Catalog: SMD TEST FIXTURE IM9110||Download PDF [1MB]||
|Impedance Measurement Handbook||Download PDF [1MB]||
|Communication Instruction Manual||
|No results were found.|
|LabVIEW driver for LCR Meter IM3523,IM3533,IM3533-01||Freeware||Version 1.00|
|LCR Application Disk (IM3523/IM3533/IM3533-01/IM3536/IM3570/IM3590/IM7580)||Freeware||REV.12|
|LCR Sample Application (IM3523/IM3533/IM3533-01/IM3536/IM3570/IM3590/IM7580)||Freeware||V1.32|
|LCR METER IM3533,IM3533-01||Firmware||V1.10|
|No results were found.|
When using the 9268-10 or 9269-10, external constant-voltage and constant-current sources are required.
SMD TEST FIXTURE IM9100
4-TERMINAL PROBE 9140-10
TEST FIXTURE 9261-10
TEST FIXTURE 9262
SMD TEST FIXTURE 9263
DC BIAS VOLTAGE UNIT 9268-10
DC BIAS CURRENT UNIT 9269-10
4-TERMINAL PROBE 9500-10
SMD TEST FIXTURE 9677
SMD TEST FIXTURE 9699
CONTACT TIPS IM9901
CONTACT TIPS IM9902
4-TERMINAL PROBE L2000
PINCHER PROBE L2001
SMD TEST FIXTURE IM9110
GP-IB CONNECTOR CABLE 9151-02
GP-IB INTERFACE Z3000
RS-232C INTERFACE Z3001
LAN INTERFACE Z3002
SHEATH TYPE TEMPERATURE PROBE 9478
No results were found.