CLAMP ON SENSOR
9661
For measuring load current, voltage output sensor500 A AC
Hioki current sensors are best-in-class devices for use with power meters and PQAs. The 9661 is a 500A AC clamp sensor with voltage output for measuring load current. CAT III 600V Key Features • For inverter devices or commercial power lines • Measure up to 500 A
9661 | For the PW3360/65, 3169, PW3198 and similar products |
---|
Note: Supports power quality analyzers, power meters and other data acquisition equipment with voltage input
Rated measurement current | 500 A AC |
---|---|
Max. measurement current | Continuous 550 A (45 to 66 Hz) |
Output rate | 1 mV AC/ A |
Amplitude accuracy (45 to 66 Hz) | ±0.3% rdg. ±0.01% f.s. |
Phase accuracy | ±0.5° (45 Hz to 5 kHz) |
Amplitude frequency characteristics | Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy) |
Max. rated voltage to earth | 600 V AC rms or less |
Measurable conductor diameter | φ 46 mm (1.81 in) or less |
Operating temperature and humidity | 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation) |
Dustproofness and waterproofness | N/A |
Dimensions and mass | 78 mm (3.07 in)W × 152 mm (5.98 in)H × 42 mm (1.65 in)D, 380 g (13.4 oz) Cord length 3 m (9.84 ft), Output terminal: BNC |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
No results were found. |
No results were found. |
No results were found. |
If you can not download, log into your myHioki account to access more technical documents and information where available.
CLAMP ON SENSOR 9661 [504KB] |
Instruction Manual |
Japanese English |
Ver.09 |
If you can not download, log into your myHioki account to access more technical documents and information where available.
CLAMP ON SENSOR 9661 [84KB] |
Ver.04 |
No results were found. |
|
Ver.07 |
No results were found. |
No results were found. |
No results were found.